http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황아름(Ah-Reum Hwang),정인일(In-Il Jung),임교빈(Gio-Bin Lim),유종훈(Jong-Hoon Ryu) 한국생물공학회 2009 KSBB Journal Vol.24 No.4
본 연구에서는 초임계 이산화탄소 추출기술의 scale-up 을 위한 기초 연구로서 추출 용량이 다른 두 종류의 초임계 추출장치를 사용하여 추출기 용량, 초임계 이산화탄소의 흐름방향, 캐놀라 씨앗 입자의 크기, 온도, 압력 등의 공정변수가 캐놀라 오일의 추출 속도와 수율에 미치는 영향을 조사하였다. 분쇄된 씨앗의 입자 크기가 작을수록 추출 효율이 증가하였으며, 약 330 bar 이하의 압력에서는 온도가 증가함에 따라 추출 효율이 감소하고, 330 bar 이상의 압력 범위에서는 온도 증가와 함께 추출 효율이 증가하는 crossover 지점이 나타나는 것을 확인하였다. 추출기의 용량을 10배 증가시킨 경우 추출용량이 추출 수율에 거의 영향을 미치지 않는 다는 것을 알 수 있었으며, 초임계 이산화탄소가 추출기 아래에서 위로 흐르는 경우 반대 방향에 비해 추출 속도가 훨씬 더 높다는 사실을 확인하였다. 또한, 초임계 이산화탄소로 추출된 캐놀라 오일의 트리글리세라이드와 지방산의 조성은 유기용매 추출에 의해 얻은 오일의 조성과 비슷하였으며, 추출 시간이나 초임계 유체의 흐름 방향에 따라서도 오일 조성에 큰 변화가 없음을 확인하였다. In this study, two supercritical extraction systems of different scale, analytical-scale and lab-scale, were employed to investigate the extraction efficiency of canola oil from canola seeds using supercritical carbon dioxide (SCCO2) as an extraction solvent. The effects of various parameters such as extraction temperature (40~80℃), pressure (200~500 bar), particle size, and SCCO2 flow direction on the extraction rate and yield were examined in detail. Triglycerides and fatty acids in the extracted canola oil were analyzed quantitatively by high-performance liquid chromatography and gas chromatography. The solubility values of canola oil in SCCO2 could be calculated from the experimental results. Similar extraction yields were obtained from both analytical-scale and lab-scale extraction systems. The extraction rates obtained under solvent SCCO2) upflow conditions were found to be higher than those of solvent downflow extraction. However, the effect of SCCO2 flow direction on the extraction yield was observed to be relatively insignificant.
초임계 유체를 이용한 PLGA 입자 제조에 첨가제가 미치는 영향
정인일(In Il Jung),함승주(Seung Joo Haam),임교빈(Gio Bin Lim),유종훈(Jong Hoon Ryu) 한국고분자학회 2012 폴리머 Vol.36 No.1
본 연구에서는 초임계 aerosol solvent extraction system(ASES) 공정을 이용하여 poly(lactic-co-glycolic acid)(PLGA) 미립자를 제조하기 위해 첨가제로 hydroxypropyl-β-cyclodextrin (HP-β-CD)를 사용하였으며, HP-β-CD의 첨가량이 PLGA 입자의 형상에 미치는 영향을 조사하였다. 또한 항암제인 파클리탁셀이 봉입된 미립자를 제조하여 HP-β-CD의 함량에 따른 약물 방출 특성의 변화를 고찰하였다. PLGA(75:25)의 경우 HP-β-CD를 고분자 중량대비 약 40%까지, PLGA(50:50)의 경우 약 30%까지 첨가하였을 때 미립자가 형성되었으며, HP-β-CD의 첨가량이 이보다 더 적은 경우에는 PLGA가 필름 형태로 형성되었다. 파클리탁셀이 봉입된 PLGA/HP-β-CD 미립자의 경우 HP-β-CD의 함량이 증가함에 따라 더 빠른 속도로 약물이 방출됨을 확인할 수 있었다. In this study, we employed hydroxypropyl-β-cyclodextrin (HP-β-CD) as an excipient to produce poly(lactic-co-glycolic acid) (PLGA) fine particles by a supercritical fluid process, called aerosol solvent extraction system (ASES), and investigated the effect of HP-β-CD content on the morphology of the particles. The influence of HP-β-CD on the drug release characteristics of paclitaxel-loaded PLGA particles was also evaluated. Fine particles were obtained when the HP-β-CD content in PLGA/HP-β-CD mixtures was greater than 40% and 30%, respectively, for PLGA(75:25) and PLGA(50:50), whereas a film-like precipitate was obtained for lower HP-β-CD content. The release rate for paclitaxel loaded PLGA(75:25)/HP-β-CD particles was found to increase with HP-β-CD content.