http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미국해사소송에 있어서의 대한민국법상의 소멸시효와 소송중지명령 -선박 MSC Carla 침몰 사건에 관한 미국판결을 중심으로
정해덕 ( Hae Deok Chung ) 韓國海法學會 2009 韓國海法學會誌 Vol.31 No.2
파나마 선적 선박 MSC Carla는 1972년 스웨덴에서 건조된 컨테이너선으로 1984년경 선박 중간부분에 15미터 정도의 중간선체(mid-body)를 용접(welding)하여 잇는 선박연장개조작업을 대한민국 법인인 H조선이 수행한 바 있는데, 1997. 11월 컨테이너 화물을 가득 싣고 대서양을 항해중 두 조각으로 깨져 침몰하여 위 선박에 선적되어 있던 컨테이너 화물들이 모두 멸실되는 사고가 발생하였다. 선박 MSC Carla의 선주는 1997년 뉴욕남부지방법원에 선주책임제한절차를 신청하였으며, 위 선박에 선적되어 있던 화물들에 대한 1,000여개 각국 화주들(Cummins Engine Co., Inc., et al.)은 오래 전에 위 선박에 대한 연장개조작업을 수행한 H조선을 상대로 불법행위 및 제조물책임 등을 근거로 미국 뉴욕남부지방법원에 손해배상을 청구하는 제3자소송(third-party complaints)을 제기하였다, 한편, H조선은 위 소송개시 이전에 화주들을 상대로 대한민국 울산법원에 채무부존재확인 소송을 제기하였다. 뉴욕남부지방법원은 울산법원 소송에 대하여 소송중지명령을 내리고 2004. 7. 9.에는 H조선의 손해배상책임을 인정하는 중간판결을 하였으나, 미국 항소법원은 2005. 10. 17. H조선에 손해배상 책임이 없다는 취지로 뉴욕남부지방법원 판결을 파기하였고 위 판결은 확정되었다. 이 사건에서 미국 항소법원은 대한민국법이 준거법이라고 판시하고 대한민국법상의 10년 소멸시효가 실체법적인 문제로서 이 사건에 적용된다는 전제 아래 이 사건 손해배상 청구권이 10년 시효기간 경과로 소멸하였다고 판시하였다. 위 판결은 각주에서 대한민국법에 의하면 불법행위 청구권은 불법행위시부터 10년이 경과하면 소멸하고(민법 766조), 제조물책임에 기한 청구권도 공급시점으로부터 10년 이내에 행사되어야 한다고(제조물책임법 제7조) 설시하였다. 위 MSC Carla 사건은 세계 각국의 화주, 선주, 조선회사 등이 관련되어 미국 해사소송의 국제적 재판관할, 준거법, 외국소멸시효, 소송중지명령, 국제소송의 경합 등 국제사법적 문제를 파악하는데 큰 도움이 된다. 이와 관련하여 미국해사소송에 있어서 외국소멸시효는 그 외국법의 입장 여하에 따라 실체법적인 것으로 해석되어 그 적용이 가능할 수 있다. 또한, 미국법원의 소송중지명령도 비록 소송당사자에 대한 명령이기는 하지만 외국에 계류중인 소송의 취하까지도 명할 수 있는 것으로 해석되나 상당한 주의와 제한하에서만 행사되어야 한다고 해석된다. 국제분쟁이 빈번하게 일어나는 오늘날 향후 이러한 문제도 관할, 준거법 등과 관련한 국제소송의 국제사법적 문제의 하나로서 연구할 필요가 있을 것이다. In November, 1997, M/V MSC Carla, a container ship with Panamanian flag, which was built in 1972 in Sweden, was split into two pieces and sunk in Atlantic Ocean and all containers on board were losed. In 1984, a Korean shipbuilding company did the welding and lengthening operation to this ship by inserting a mid-body into the middle part of the ship. In 1998, the cargo owners filed a third party complaint for compensation for their losses against the Korean shipbuilding company on the basis of tort and product liability, etc before the U.S. New York Southern District Court and the Korean company also filed the lawsuit for declaration of non-existence of the liability against the cargo owners before the Korean Ulsan District Court. In 2004, the New York Southern District Court rendered an anti-suit injunction against the Korean company and then rendered a decision to acknowledge the Korean company`s liability. However, the appellate court, the Second Circuit Court reversed the original decisions. The Second Circuit Court accepted Korean laws as governing law and ruled that the cargo owners` claim had been time-barred by elapse of 10 year period of Korean statute of limitation. It could be worthwhile for us to review various issues on choice of law and international litigation in this U.S. maritime litigation, such as international jurisdiction, governing law, foreign statute of limitation, and anti-suit injunction, etc, because various foreign companies have been involved in this case and there have been a lot of different foreign factors. In the U.S. maritime litigation, foreign statute of limitation can be viewed as a substantial matter and be applied. It is also construed that anti-suit injunction can be issued only with care and great restraint. To prepare for future international dispute, these issues will also need to be discussed and studied in Korea.
제작조건에 따른 CulnSe₂ 3원 화합물 박막의 제작과 분석에 관한 연구
양현훈(Yang, Hyeon-Hun),김영준(Kim, Young-Jun),소순열(So, Soon-Youl),정운조(Jeong, Woon-Jo),박계춘(Park, Gye-Choon),이진(Lee, Jin),정해덕(Chung, Hae-Deok) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.11
태양전지는 태양광에너지를 바로 전기에너지로 전환시키는 소자이다. 과거에 많이 연구되던 고품질의 단결정 소자는 높은 에너지 변환효율을 가지고 있으나 가격 경쟁력이 크게 뒤져 일반화되지 못하였다. 최근에는 다결정 태양전지의 응웅 가능성에 대한 연구가 활발히 진행되어 오고 있다. 이중 CuInSe₂는 여러 가지 좋은 물성을 가지고 있어서, 저가의 고효율 태양전지를 위한 광흡수층 재료로 가장 주목받고 있다. CuInSe₂ 화합물 박막을 제조하기 위해 단위원소를 spttering법 과 Evaporeation법을 사용하여 증착하고 전기로에서 열처리 공정을 사용하여 single-phase 화합물 CuInSe₂ 박막을 얻고자 하였다.
백수웅(Baek, Su-Ung),양현훈(Yang, Hyeon-Hun),한창준(Han, Chang-Jun),김한울(Kim, Han-Wool),나길주(Na, Kil-Ju),이석호(Lee, Suk-Ho),정해덕(Chung, Hae-Deok),박계춘(Park, Gye-Choon) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
Selenium 물질은 지구상에 많은 양이 존재하고, 가격이 저렴하다. 그 성질은 분광감도가 시감도에 잘 일치하고, 광학적 특성이 뛰어나서 태양전지로 연구도 활발히 진행 중이다. 본 연구에서는 Se박막을 열저항증착방법을 이용하여 증착시, 기판온도를 변화를 시켜 그 구조적특성의 변화를 관찰하였다. 50?C에서 변화를 시작하여 70?C, 100?C의 변화에서 각각 단사정계, 육방정계 결정구조가 나타났다. XRD 분석결과 100?C에서 증착한 sample의 회절강도가 70?C에서 증착한 sample보다 작은회절강도를 나타내었다. 추후 열처리공정등을 통하여 보완하면, CISe 박막 화합물 태양전지 연구에 큰 효과를 나타낼 수 있을 것으로 예상된다.
양현훈(Yang, Hyeon-Hun),백수웅(Back, Su-Ung),김한울(Kim, Han-Wool),한창준(Han, Chang-Jun),이석호(Lee, Suk-Ho),정운조(Jeong, Woon-Jo),박계춘(Park, Gye-Choon),이진(Lee, Jin),정해덕(Chung, Hae-Deok) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
CuInS₂ thin films were synthesized by sulfurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furnace annealing at temperature 200[?C]. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor CuInS₂ thin films with non-stoichiometry composition. CuInS₂ thin film was well made at the heat treatment 200[?C] of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and hall measurement system. At the same time, carrier concentration, hall mobility and resistivity of the thin films was 9.10568{times}10^{17} [cm^{-3}], 312.502 [cm²/V{cdot}s] and 2.36{times}10^{-2} [{Omega}{cdot}cm], respectively.
양현훈(Hyeon-Hun Yang),백수웅(Su-Ung Baek),나길주(Kil-Ju Na),소순열(Soon-Youl So),박계춘(Gye-Choon Park),이진(Jin Lee),정해덕(Hae-Deok Chung) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
MgF₂ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the MgF₂ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions , and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of MgF₂ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from 200[℃] to 350[℃] at intervals of 50[℃]. and annealing temperature an effect on the thin film was changed from 200[℃] to 400[℃] at intervals of 50[℃]. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.
태양전지용 MgF<sub>2</sub> 반사방지막 특성연구
박계춘(Park, Gye-Choon),양현훈(Yang, Hyeon-Hun),백수웅(Baek, Su-Ung),나길주(Na, Kil-Ju),소순열(So, Soon-Youl),이진(Lee, Jin),정해덕(Chung, Hae-Deok) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
MgF₂ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the MgF₂ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions, and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of MgF₂ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from 200[?C] to 350[?C] at intervals of 50[?C]. and annealing temperature an effect on the thin film was changed from 200[?C] to 400[?C] at intervals of 50[?C]. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.
진공 석영관에서 Selenization한 CuInSe₂ 박막 특성분석
양현훈(Yang, Hyeon-Hun),백수웅(Back, Su-Ung),김한울(Kim, Han-Wool),한창준(Han, Chang-Jun),나길주(Na, Kil-Ju),김영준(Kim, Young Jun),소순열(So, Soon-Youl),박계춘(Park, Gye-Choon),이진(Lee, Jin),정해덕(Chung, Hae-Deok) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
본 실험에서는 CuInSe₂ 3원물질을 화학량론적 조성비가 되도록 박막을 제조하기 위해 각 단위원소를 원자비에 맞춰 전자선가열 진공증착기를 사용하여 Cu, In, Se 순으로 증착하였다. 90?C이하의 온도에서 CuIn₂, In상이 주를 이루며, 100?C이상에서는 Cu_{11}In_9상이 나타나기 시작하고 In상이 증가하였다. 10^{-3}torr이상의 진공석영관에서 열처리와 동시에 Selenization을 통해 제작된 CuInSe₂박막은 열처리온도 250?C에서는 CuxSe, CuSe등의 2차상들이 나타나다가 450?C이상의 고온에서 CuInSe₂ 단일상을 형성하였다. 이로부터 진공중에서 반응을 시켰을 때, 더 낮은 온도에서 반응이 일어나고 열역학적으로 보다 안정한 소수의 화합물들이 쉽게 형성됨을 확인할 수 있었다. 특히 250?C에서는 Sphalerite 구조를 가지다가 350?C이상의 온도에서 Selenization하였을 때 Chalcopyrite 구조를 가졌다. 박막이 두꺼워지면서 결정립의 크기가 커지고 응력이 작아지는 특성을 보였다. 에너지 밴드갭은(E_g)은 Cu/In 성분비율이 클수록 작은값을 보였으며, 결절립크기가 증대되므로 결국 흡수계수가 낮아짐을 알 수 있다. 또한 두께가 증가할수록 전반적으로 흡수계수가 증가하였고 Cu/In의 성분비율이 0.97일 때 기초흡수파장은 1,169nm이고 에너지밴드갭은 1.06eV이었으며, 두께 1.5{mu}m이상일 때 전반적으로 양호한 상태의 p-type CuInSe₂박막을 제작하였다.