비이온성 혼합유화제를 이용한 화장용 크림 유화액의 유화안정성 평가

홍인권 ( In Kwon Hong ),김수인 ( Su In Kim ),박보라 ( Bo Ra Park ),최준호 ( Junho Choi ),이승범 ( Seung Bum Lee ) 한국공업화학회 2016 공업화학 Vol.27 No.5

화장품 제조의 기본원리인 유화과정은 섞이지 않는 두 액체성분에 유화제를 첨가하여 한 쪽의 액체를 다른 쪽의 액체에 분산하여 안정화된 유제를 제조하는 것이다. 이때 사용되는 유화제의 종류에 따라 다양한 화장품을 제조할 수 있다. 본 연구에서는 서로 다른 비이온성 혼합유화제를 이용하여 화장용 크림 유화액을 제조한 후 유화액의 점도변화, 입자 크기 변화, 입자 크기 분포변화 등을 측정하여 안정성을 평가하였다. 실험에 사용된 비이온성 유화제의 HLB 값은 EMU-01 (HLB = 12.9), EMU-02 (HLB = 12.9), EMU-03 (HLB = 12.4), EMU-04 (HLB = 12.5)이다. 4종류의 혼합유 화제 모두 시간이 증가함에 따라 입자 크기가 증가하고 점도가 감소하는 경향을 나타내었으며, 화장품 제조 시 교반 속도가 증가함에 따라 입자 크기는 감소하고 점도는 증가하는 경향을 나타내었다. 그러나 4종류의 혼합유화제를 사용한 유화액 모두 층분리는 일어나지 않아 56일까지의 유화액의 안정성은 확보할 수 있었다. 또한 유화액의 점도는 EMU-01 > EMU-02 > EMU-03 > EMU-04로 크게 측정되었으며, 입자 크기는 EMU-01 ~ EMU-02 > EMU-03 ~ EMU-04로 측정되어 화장용 크림 유화액을 제조할 경우 맞춤형으로 사용이 가능할 것으로 사료된다. Emulsification is a fundamental process of cosmetics manufacture which produces stabilized emulsion by dispersing the liquid from the one side to the other by adding an emulsifier in an immiscible liquid. Various types of emulsifiers can produce various cosmetics. In this study, we evaluated the stability of emulsifier by measuring variations in the viscosity, particle size and particle size distribution. HLB values of nonionic emulsifiers which are used in this paper are 12.9, 12.9, 12.6 and 12.5 for EMU-01, EMU-02, EMU-03 and EMU-04, respectively. All types of emulsions showed an increase in the particle size and a decrease in the viscosity with the time. Also they showed a decrease in the particle size and an increase in the viscosity with respect to increasing the stirring speed. However, the stability of emulsions up to 56 days was secured by observing the non-separation of emulsions. In addition, the viscosity of the emulsions was measured in the order of EMU-01 > EMU-02 > EMU-03 > EMU-04 while the size of particles was measured in the order of EMU-01 ~ EMU-02 > EMU-03 ~ EMU-04. This indicates that our emulsion can be potentially used for preparing a cosmetic facial cream.

감잎, 엉겅퀴, 뉴그린으로부터 플라보노이드성분의 추출

홍인권 ( In Kwon Hong ),박보라 ( Bo Ra Park ),전길송 ( Gil Song Jeon ),이승범 ( Seung Bum Lee ) 한국공업화학회 2016 공업화학 Vol.27 No.3

본 연구에서는 항산화성분 함량이 높다고 알려진 천연물인 감잎, 엉겅퀴, 뉴그린을 이용하여 유효성분을 추출하고 DPPH radical scavening activity와 플라보노이드성분 함량분석을 수행하였다. 추출에 사용된 추출용매로는 초순수와 주정을 이용하였고, 초순수-주정의 비율, 시료의 양, 추출시간, 추출온도 등을 변수로 설정하였다. 각 천연물의 최적추출조건은 추출시간(2.5~3.5 h), 시료의 양은 50 g/L이었고, 주정/초순수의 부피비와 추출온도의 경우 각각 감잎(55~65 vol%, 50~60 ℃), 엉겅퀴(40~50 vol%, 55~65 ℃), 뉴그린(55~65 vol%, 50~60 ℃)으로 나타났다. 또한 추출된 유효성분의 항산화능과 플라보노이드성분 함량분석 결과 감잎 > 엉겅퀴 > 뉴그린 순으로 크게 나타났다. In this study, we extracted active components from thistle, persimmon leaf, and new green which are known to have a high content of antioxidants and also analyzed the 1,1-Diphenyl-2-picrylhydrazyl (DPPH) radical scavening activity and flavonoid content. Both ultrapure water and alcohol were used as extraction solvents and the ratio of both solvents, sample, amunts extraction time, and extraction temperature were varied. The optimal extraction condition of each natural compounds were 2.5~3.5 h of the extraction time and 50 g/L of the sample amount. The optimal ratio of ultrapure water and alcohol and extraction temperature were as follows; persimmon leaf (55~65 vol%, 50~60 ℃), thistle (40~50 vol%, 55~65 ℃) and new green (55~65 vol%, 50~60 ℃). In addition, the antioxidant capacity and flavonoid content of the extract increased in the order of persimmon leaf, thistle, and new green.

재활용 상온아스콘 혼합물의 최적 결합재 개발

홍인권 ( In Kwon Hong ),전길송 ( Gil Song Jeon ),양창배 ( Chang Bae Yang ),이승범 ( Seung Bun Lee ) 한국공업화학회 2014 공업화학 Vol.25 No.4

This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsifiedasphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. Thecyclic aggregate satisfying KS F 2572 was collected from waste asphalt by adequate processing. As the moisture content increased,the shearing strength was decreased. The maximum marshall stability was shown at the 3.0 wt% moisture content. So the optimum moisture content was 3.0 wt%. The marshall stability and flow value with the amount of emulsified asphaltwas satisfied in the range of 0.5∼2.5 wt%, and the porosity was satisfied in the range of 0.7∼2.5 wt%. So the optimumamount of emulsified asphalt was 1.6 wt%. The optimum amount of emulsion type additive was 0.1 wt% in the light of marshallstability and degree of saturation of recycling cold asphalt mixture.

방화용 실란트의 내화성 향상을 위한 첨가제로서 팽창흑연의 개질

홍인권 ( In Kwon Hong ),이원재 ( Won Jae Lee ),임현석 ( Hyun Seok Lim ),이승범 ( Seung Bum Lee ) 한국공업화학회 2017 공업화학 Vol.28 No.4

본 연구에서는 방화용 실란트의 첨가제로 사용되는 팽창흑연의 부피팽창률과 경도특성을 개선하기 위해 팽창흑연에 다양한 수지를 코팅한 후 그 특성을 고찰하였다. 수지의 코팅률을 나타내는 평균코팅두께는 수지의 건조속도와 점도의 영향으로 초산비닐계수지 > 아크릴수지 > 우레탄수지 > 수용성라텍스의 순으로 크게 나타났다. 또한 수지의 종류에 따라 코팅된 팽창흑연의 부피팽창률은 우레탄수지 > 수용성라텍스 > 아크릴수지 > 초산비닐계수지의 순으로 컸으며, 경도는 초산비닐계수지 > 아크릴수지 > 수용성라텍스 > 우레탄수지의 순으로 증가함을 알 수 있었다. 이는 코팅처리를 하지 않은 팽창흑연에 비해 부피팽창률은 감소하나 경도가 현저하게 증가되어 방화첨가제로 사용이 가능함을 알 수 있었다. 반응표면분석법에 의한 최적화실험 결과 아크릴수지의 최적코팅 조건은 수지의 첨가량 37.6 wt%과 코팅 교반속도 441.4 rpm이었다. This study was carried out to investigate the volumetric expansion ratio and hardness of expanded graphite after coating with various resins which were used as an additive of fireproof sealant. The coating thickness of the resin, which represents the coating rate, was dependent of the drying speed of the resin and the viscosity of the resin. Therefore the coating thickness was shown as follows: polyvinyl acetate > acrylic resin > urethane resin > water soluble latex. Furthermore, the volumetric expansion ratio was as follows: urethane resin > water soluble latex > acrylic resin > polyinyl acetate and the hardness was as follows: polyvinyl acetate resin > acrylic resin > water soluble latex > urethane resin. This showed that the volume of expansion was reduced by expansion, which was not covered by coating, but significantly increased by increasing hardness and allowed it to be used as a refractory addition. According to the response surface methodology, the optimized addition amount and stirring speed of acrylic resin were 37.6 wt% and 441.4 rpm, respectively.

학술발표회 초록 ( 재료 Poster 발표 ) : 초임계 이산화탄소를 이용한 다공성 Silicone Rubber 의 제조

홍인권 ( In Kwon Hong ),정일현,한상우 ( Sang Woo Han ) 한국화학공학회 1994 추계학술발표회 Vol.- No.-

마이크로웨이브를 이용한 폐식용유로부터 FAME의 제조 : RSM에 의한 공정변수 최적화

홍인권 ( In Kwon Hong ) 한국공업화학회 2020 공업화학 Vol.31 No.2

본 연구에서는 마이크로웨이브를 이용한 폐유원료 바이오디젤 제조공정의 최적화 과정을 반응표면분석법을 이용해 진행하였다. 공정 변수로는 폐식용유의 산가, 마이크로웨이브 조사시간, 마이크로웨이브 조사온도, 알코올/유지 몰비 등을 선택하였고, 반응치로는 FAME 함량(96.5% 이상) 및 동점도(1.9~5.5 cSt)를 설정하였다. 기초실험을 통해 계량인자 변수범위를 마이크로웨이브 조사시간(4~6 min), 마이크로웨이브 조사세기(400~600 W), 알코올/유지 몰비(7~9)로 정하고, 반응표면분석법을 이용한 최적화 결과 바이오디젤 제조공정의 최적조건은 산가(2.0, 3.0 mg KOH/g) 별로 마이크로웨이브 조사시간(5.0, 5.1 min), 마이크로웨이브 조사세기(481.3, 525.5 W), 메탄올/유지 몰비(7.9, 8.4)로 나타났고, 이 조건에서 FAME 함량(97.49, 96.34%)과 동점도(4.01, 4.12 cSt)로 예측되었다. 실제 실험을 통해 확인한 결과는 FAME 함량(97.82, 96.42%)과 동점도(4.07, 4.16 cSt)로 측정되었고, 이의 평균 오차율은 각각 0.22, 0.98%로 나타났다. In this study, the optimization of the biodiesel production process from waste oil using microwave with response surface methodology (RSM) was conducted. The microwave irradiation time and power in addition to the alcohol/oil mole ratio were chosen as process parameters. Also the fatty acid methyl ester (FAME) content (over 96.5%) and kinematic viscosity (1.9~5.5 cSt) were selected as response values. From basic experiments, the range of quantitative factors were set as following; 4~6 min, 400~600 W, and 7~9 for the microwave irradiation time and power, and alcohol/oil molar ratio, respectively. The optimum conditions for the methanolysis were 5.0~5.1 min, 481.3~525.5 W, 7.9~8.4, and 2.0 or 3.0 mg KOH/g for the microwave irradiation time and power, methanol/oil molar ratio, and each acid value, respectively. The FAME content and kinematic viscosity were predicted as 97.49~96.34% and 4.01~4.12 cSt, respectively, under the condition above. Under the optimum experimental conditions, the results showed that the FAME content and kinematic viscosity of 97.82~96.42% and 4.07~4.16 cSt, respectively were measured and the mean error rates were 0.22% and 0.98%, respectively.

굴 패각의 잔골재 입도분포 변화에 따른 모르타르의 강도특성

최인권 ( Choi In-kwon ),홍상훈 ( Hong Sang-hun ),정의인 ( Jung Ui-in ),김봉주 ( Kim Bong-joo ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2

In this study, mortar strength was measured by grinding oyster shell and changing the particle size distribution. For the experiment, the oyster shells were processed to a fine aggregate size of 10㎜ or less. In this experiment, seven particle size distribution conditions were selected and tested. Because oyster shells are different in density from sand, their volume ratios were calculated and converted to mass ratios of 1: 3. The strength test was carried out one day after the steam curing.

운전조건 및 유로형상에 따른 고체고분자형 연료전지의 수소극에서의 수분관리

홍인권 ( In Kwon Hong ),김선회 ( Sun Hoe Kim ) 한국공업화학회 2011 공업화학 Vol.22 No.5

전극면적 25 cm2 고체고분자형 연료전지를 이용하여 수소극의 수분관리에 관한 연구를 진행하였다. 수분관리는 연료 전지의 운전에 있어서 가장 핵심적인 인자 중의 하나이다. 본 연구에서는 연료극의 flooding의 위험성이 가장 높은 작동전류밀도 200 mA/cm2에서 수소극의 가습 및 온도 등의 운전조건의 변화, 그리고 유로 형상의 영향성을 평가하였다. 또한 연료극과 공기극의 양론비를 변화시킴과 동시에 유로의 형상에 따른 영향성을 파악하기 위한 실험을 실시하였다. 연료전지의 운전에 있어서 연료극과 공기극의 양론비에 따른 수분관리의 영향성을 확인할 수 있었고 또한 온도변화 및 가습조건의 변화에 따른 성능의 변화 역시 관찰할 수 있었다. A PEMFC single cell with the active area of 25 cm2 was used to verify the effect of water management in the anode. Water management is one of the most critical operating variables. In this paper the effect of operating condition change, such as anode humidification and temperature, was investigated under constant current density of 200 mA/cm2 where possible anode flooding operating area. Also experiments to observe the effect of the anode and cathode stoichiometry change and flow field design on the water management were performed. The water management was effected by the stoichimetry change. The temperature and humidification change also affected the fuel cell performance.

증량제 혼합비율에 따른 네온변압기의 열내구성 평가

홍인권 ( In Kwon Hong ),전길송 ( Gil Song Jeon ),이승범 ( Seung Bum Lee ) 한국공업화학회 2015 공업화학 Vol.26 No.4

The physical properties, such as the heat resistance and thermal durability of the temperature difference fatigue resistance should be excellent when preparing an epoxy type resin for a neon transformer housing. In this study, 50 wt% of SiO2 and silica were selected as a reinforcement and diluent filler for epoxy type resins, respectively. Thermal conductivity and thermal stability were measured as the mixing ratio varied upon the particle sizes. The optimal amount of the mixed silica was 50 wt%. Thermal stability was improved with increasing the amount of larger silica particles. The optimal mixing ratio of differently sized silica particles was 28/3 : 14/18 : 8/10 mesh = 1 : 1 : 1. From these results, it is thought that neon transformer is producible which has excellent thermal durability.

열가소성 차선도장에서 반사유리알의 함침특성

홍인권 ( In Kwon Hong ),이창근 ( Chang Geun Lee ),이승범 ( Seung Bum Lee ) 한국공업화학회 2015 공업화학 Vol.26 No.2

Thermoplastic road markings are one of the most widely used road markings in the world. However, the durability of domestic road markings is relatively shorter than that of the global average of, approximately, three years. To overcome it, the conventional thermoplastic road markings were prepared by adding polyolefin and oxidized PE wax to conventional petroleum resin. In addition, the melting viscosity was designed below 500 cP at 220 ℃ as well as the optimum viscosity for spray painting, and embedding ratio of glass beads were controlled about 50∼60% by spraying in an interval of 1 second. Also the glass bead adhesive ratio was improved by reducing the amount of CaCO3 below 40 wt%. The retroreflectivity was tested under four different conditions to evaluate the abrasion resistance of thermoplastic road markings. The retroreflectivity coefficient satisfied the international standard (150 mcd?m-2?lux-1) in this study, and TPRM-7 was determined as an optimal ratio.