http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
홍승수(Seung Soo Hong),신지희(Ji Hee Shin),송권빈(Kwon Bin Song),이광희(Kwang Hee Lee) 한국고분자학회 2013 폴리머 Vol.37 No.3
마이크론 크기의 입자를 분산하기에 적합하나 나노 크기의 입자를 분산하기에는 미흡한 이축압출기를 사용하 여 카본나노튜브(CNT) 분산을 시도하였다. 카본나노튜브 분산성 향상을 위해 서로 다른 입자 형상을 가지는 무기 충전제를 부가하였다. 무기 충전제 첨가에 따른 점도 증가는 상대적으로 높은 전단력을 유도하여 응집된 카본나노 튜브 입자의 분산을 도모하였다. 또한 충전제 입자들은 전단력이 미치지 않는 구역에서 일어나는 카본나노튜브의 재응집을 억제함으로써 분산 안정화에 기여하였다. In this study, it was attempted to disperse carbon nanotubes (CNTs) in a polymer matrix using a twin-screw extruder which was good for dispersing fillers of micron sizes but not suitable for dispersing nanometer-sized materials. Improved dispersion of CNTs could be achieved by the addition of inorganic fillers with different geometrical shapes. An increase in the matrix viscosity provided a high shear stress on aggregated CNTs, leading to a good dispersion of CNTs. The presence of the inorganic fillers was supposed to suppress the re-aggregation of CNTs in the regions where a lower shear stress was applied. As a result, the CNTs dispersion was well stabilized.
홍승수(Seung-Soo Hong),신용현(Yong-Hyeon Shin),임종연(Jong-Yeon Lim),이상균(Sang-Kyun Lee),정광화(Kwang-Hwa Chung),David Simpson,Fiona Redgrave,Michael Perkin,Bernard Waller,M. Hirata$ 한국진공학회(ASCT) 1997 Applied Science and Convergence Technology Vol.6 No.4
Capacitance Diaphragm Gauge(CDG)를 전달표준기로 사용하여 한국과 영국의 저진공표준의 국제 비교를 수행한 결과 양국 표준기에서 교정한 CDG의 압력비의 차이는 0.05% 이었다. 또한 두 개의 Spinning Rotor Gauge(SRG)를 이용하여 한국과 일본의 고진공표준의 국제비교를 수행한 결과 양국 표준기에서 교정한 SRG의 accommodation coefficient(σ)의 차이가 0.4% 이내이었다. CDG와 SRG를 이용한 한국과 영국의 저진공표준기 및 한국과 일본의 고진공표준기의 국제비교 결과 CDG 및 SRG 자체의 고유오차범위 이내에서 결과가 일치함을 확인할 수 있었다. The international intercomparison of low vacuum standards between Korea and United Kingdom was performed using a Capacitance Diaphragm Gauge (CDG) as a transfer standards. The resultant difference in pressure of the CDG was 0.05%. Similialy, the difference in accommodation coefficient of a spinning rotor gauge (SRG) between Japan and Korea was verified within 0.4% for high vacuum standards. The intercomparisons of low and high vaccum standards of Korea, United Kingdom, and Japan using a CDG and SRG show that the vacuum standards agree within the inherent uncertainty limits.
한국 KRISS와 이태리 IMGC간의 고진공 국가표준의 국제비교
홍승수(Seung-Soo Hong),신용현(Yong-Hyeon Shin),정광화(Kwang-Hwa Chung),G. Rumiano(G. Rumiano),M. Bergoglio(M. Bergoglio),A. Calcatelli(A. Calcatelli) 한국진공학회(ASCT) 1995 Applied Science and Convergence Technology Vol.4 No.2
Spinning Rotor Gauge(SRG)를 전달표준기(transfer standard gauge)로 사용하여 한국표준과학연구원(KRISS)의 고진공표준과 이태리 표준연구소인 IMGC(Istituto di Metrologia Gustavo Colonnetti) 고진공표준의 국제비교를 실시하였다. 그 방법은 SRG의 accommodation coefficient(s)를 각 연구실의 고진공표준기로 측정하여 그 결과를 비교하였다. 이 결과 두 기관에서 교정한 SRG 볼의 σ값의 평균차이는 0.696%로서 양국의 고진공표준은 오차범위내에서 일치하는 것으로 나타났다. The international intercomparison of high vacuum standards between two national standards laboratories, KRISS of Korea and IMGC of Italy, was carried out using a spinning rotor gauge (SRG) as a transfer standard. The difference in accommodation coefficient(σ) of a SRG ball determined by each laboratory was 0.696%, thus it is concluded that the high vacuum standards of two national laboratories agree within the uncertainty limit.
홍승수(Seung-Soo Hong),신용현(Yong-Hyeon Shin),임종연(Jong-Yeon Lim),정광화(Kwang-Hwa Chung) 한국진공학회(ASCT) 1997 Applied Science and Convergence Technology Vol.6 No.4
점성진공계(spinning rotor gauge, SRG)는 고진공영역인 1×10^(-5)~100 Pa에서 전달표준기(transfer standard gauge)로 사용되고 있는 진공게이지이다. 제조회사가 각각 Leybold-Heraeus와 MKS회사인 두 개의 SRG에 대해서 질소가스를 사용하여 장기안정성과 적응계수(accommodation coefficient, σ) 결정에 영향을 미치는 변수들인 측정압력, 온도, 최대도달압력(base pressure), 신호분산(signal scattering), 영점(offset)변화에 대한 특성을 10개월에 걸쳐 조사하였다. 이 결과 장기안정특성 및 입력변수들에 의한 영향이 SRG 고유오차인 ±1.0% 이내에 있음을 확인하였다. Spinning Rotor Vacuum Gauge (SRG) is used as a high vacuum transfer standard gauge in the 1×10^(-5) to 100 Pa range. We have measured and characterized long-term stability of 2 SRGs during 10 months for N₂ gas, which were produced by Leybold Heraeus and MKS. The variations of accommodation coefficient values of them with several pressure, temperature, base pressure, signal scattering, offset value conditions have been measured also. It is concluded that the characteristics of long-term stability and variation of σ values were within their uncertainty.
홍승수(Seung-Soo Hong),신용현(Yong-Hyeon Shin),정광화(Kwang-Hwa Chung) 한국진공학회(ASCT) 1996 Applied Science and Convergence Technology Vol.5 No.3
초음파간섭원리를 이용한 액주형압력계를 개발하여 측정범위가 1 Pa(7.5^(-3) torr) 에서 10^5 Pa(대기압)이고 오차가 ±(30 ppm of pressure+12 mPa)인 저진공영역의 국가표준을 확립하였다. 이 표준기가 개발되므로서 이 영역의 전달표준기인 용량형진공계의 교정이 가능하여 산업체등과의 측정표준의 소급성을 유지 할 수 있게 되었을 뿐만아니라, 용량형진공계를 이용한 국제비교를 통해 국가표준기의 신뢰성을 높이고 측정능력을 향상시킬 수 있는 기반을 마련하였다. The Ultrasonic Interferometer Manometer(UlM) which can calibrate from 1 Pa to 10^5 Pa has been developed, and its uncertainty is evaluated less than ±(30 ppm of pressure+12 mPa). We can calibrate Capacitance Diaphragm Gauge(CDG) used as a transfer standard gauge in the low vacuum field. The VIM enables to maintain the measurement traceability for industries. In order to improve the UIM's accuracy, we will perform the international intercomparison with other national standards laboratories.
비등방 산란 매질에서의 복사전달 문제의 몬테카를로 해법
박찬,홍승수,PARK CHAN,HONG SEUNG SOO 한국천문학회 1999 天文學論叢 Vol.14 No.1
We have developed a Monte Carlo code, which solves the problem of radiative transfer in anisotropically scattering atmosphere. The radiative code is flexible in handlings of the system geometry, the distribution of scattering particles, and the source-particle geometry. This code treats the case of highly forward throwing scattering. As performance tests, we have compared the result of Monte Carlo calculations with that of Quasi-Diffusion method for a spherically symmetric cloud model.