http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한석종(Seok Jong Han),박다인(Da In Bak),이상호(Sang Ho Lee),이재규(Jae Gyu Lee) 대한설비공학회 2019 대한설비공학회 학술발표대회논문집 Vol.2019 No.11
This study analyzed the heat transfer characteristics of the contact conditions change between the thickness and the material of the insulation in the floor assembly of the wind tunnel test section. Computational FEM technique was used to analyze the temperature distribution and heat flux characteristics for the floor assembly of the test section. As the thickness of the insulation increased, the heat flux at the floor assembly of the test section decreased by about 15%. At the same time, the thermal insulation performance varied greatly within the thermal contact conductance of 250 ~ 1,000 W/㎡K. The heat transfer characteristics of the floor assembly in the wind tunnel test section obtained through this study can provide basic data for the development of environmental test wind tunnels.
한석종(Seok Jong Han),이욱재(Uk Jae Lee),이상호(Sang Ho Lee),최혁진(Hyuk Jin Choi) 대한설비공학회 2018 대한설비공학회 학술발표대회논문집 Vol.2018 No.5
조류발전용 쉬라우드 장치 내 터빈블레이드의 성능향상에 대한 수치해석 연구를 수행하였다. 전산유체역학 기법을 이용하여 일정한 초기유속 조건에서 유동장내에 터빈블레이드가 일정한 속도로 회전하고 있을 때 쉬라우드의 유 · 무에 따른 토크 값을 비교하여 성능향상을 분석하였다. 이를 통해 쉬라우드 구조체만의 유동장내에 중심부에서 좁아지는 단면적을 이용해 초기유속보다 크게 증가하였으며 터빈블레이드를 수반한 시스템에서 해수유동에 따른 토크 값이 증가하였다. 쉬라우드 구조체에 따른 조류발전용 터빈의 성능 변화를 분석하였으며, 추후 효율적인 쉬라우드 조류발전 시스템 개발에 필요한 자료를 제시하고자 하였다.
외다이아프램을 사용한 현장용접형 각형강관ㆍH형강보 접합부의 탄소성거동에 관한 연구
정진안(Chung Jin-An),한석종(Han Seok-Jong),양일승(Yang Il-Seung) 대한건축학회 2010 大韓建築學會論文集 : 構造系 Vol.26 No.8
This study focuses on the development of a new method of H-shaped beam-to-square column connection with outer diaphragm with field welding. The specific type of beam-to column connection with external stiffener using field welding is proposed. The structural behavior of this connection is examined experimentally. The two loading type tests are conducted under the experimental parameters given as details. First are described symmetrical loading test that supported the both ends or a beam simply and applied load from the column top end for investigating a fundamental characteristic of this connection. Further are given the anti- symmetrical loading test that carries out simple support of the column top end and the column base, and applied load from the both ends of a beam for investigating structural performance of this connection. From the results, it makes clear that the external stiffener type connection proposed in this paper is reliable connection method.