http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
근적외선 조사 스포츠웨어 착용 시 운동기술 향상과 플라시보 효과
하태호(Ha, Tae-Ho),김성운(Kim, Sung-Woon) 한국체육과학회 2012 한국체육과학회지 Vol.21 No.3
The purpose of this investigation was to determine the extent to which NIR light influenced the golf-putting performance. One-hundred eight college students participated in the study. Four experimental conditions were created: (1) an active group with expectancy instructions, (2) an active group without expectancy instructions, (3) a placebo group with expectancy instructions, and (4) a placebo group without expectancy instructions. Subjects performed 40 acquisition trials followed. ANOVAs with repeated measures on the last factor were performed on the various dependent variables: absolute error(AE), variable error(VE), directional error(DE), and radial error(RE). The results of this investigation revealed significant main effects for Groups on the absolute error(AE) and variable error(VE). Participants in the active group with expectancy instructions and an active group without expectancy instructions group were significantly better than the other placebo groups in the absolute error(AE) and variable error(VE). In conclusion, the placebo effect does not influence motor skill tasks in which perception and cognitive information processing are important.
하태호 ( Tae Ho Ha ),김성운 ( Sung Woon Kim ),김진구 ( Jin Gu Kim ),박상범 ( Sang Bum Park ) 경북대학교 중등교육연구소 2012 중등교육연구 Vol.60 No.1
이 연구의 목적은 활동관찰이 개방기술인 축구드리블 과제 학습에 미치는 영향을 분석함으로써 운동기능학습의 촉진을 위한 활동관찰 프로그램의 적용 가능성을 알아보는데 있다. 실험에 참여한 피험자는 만14세의 남자 중학교 2학년 40명으로 축구드리블 수행에 아무런 장애가 없는 신체적, 정신적으로 건강한 오른발잡이들로만 참여하였다. 축구드리블 동작수행 시간에 따른 집단(4)×측정시점(4)에 대한 반복측정 이원분산분석을 실시하였고, Tukey`s HSD를 사용하여 사후검증을 실시하였다. 종속변수는 축구드리블 동작수행 시간이다. 연구결과 활동관찰은 환경이 변화하고 예측하기 어려운 특성을 지니고 있는 개방기술인 축구드리블 기술학습을 촉진시킬 수 있음을 보여주었다. 또한 활동관찰은 신체연습과 병행 되었을 때 가장 큰 효과를 지닐 수 있으며, 활동관찰과 신체연습의 병행은 어느 한 가지 연습방법을 통해 얻을 수 있는 것 이상의 학습경험을 제공할 수 있음을 보여주었다. 그러므로 이 연구 결과를 종합해 보면 운동기능 학습에서 활동관찰은 운동기능의 학습을 촉진 시킬 수 있는 인지적 중재방법으로써 그 가능성이 높다고 사료된다. The purpose of this study was to examine the effectiveness of action observation on the performance and learning of a soccer dribbles task. Forty middle school students whose ages ranged from 14 to 15 years (M=14. 00) participated in this experiment. The participants were randomly assigned to one of four experimental conditions: (1) action observation group(n=10), (2) physical practice group(n=10), (3) simultaneous group which practiced AO and PP alternatively(n=10), (4) control group (n=10). Data was analyzed using two-way ANOVAs with repeated measures of group(4) and time(4). Dependent variables were soccer dribbles time. The results of this study indicated that the AO, PP, and simultaneous group were also superior to the control group, and in particular the simultaneous group was faster than the AO, PP group in response time for soccer dribbles. These results suggests that action observation can facilitate the performance of a soccer dribbles and its effect can be maximized when performed simultaneously with the physical practice.
이창우,하태호,이재학,김승만,김용진,김동훈,Lee, Chang-Woo,Ha, Tae-Ho,Lee, Jae-Hak,Kim, Seung-Man,Kim, Yong-Jin,Kim, Dong-Hoon 대한기계학회 2015 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.3 No.4
스마트폰을 비롯한 고성능 모바일 전자기기의 발전에 따라서 경박단소한 전자부품의 요구가 커지고 있으며 이를 위해서 새로운 패키징 방법이 탄생하고 있다. 이러한 새로운 패키징 공정에서 웨이퍼 본딩 공정이 많이 요구되고 있다. 웨이퍼 본딩에서 많이 활용되는 방법이 열 압착 방법으로 가열된 헤드로 웨이퍼에 압력을 가하여 본딩하는 방법이다. 열 압착 방법에서 요구되는 공정조건은 온도 균일성과 Uniform Press이다. 온도 균일성은 마이크로 히터와 열 해석을 통한 설계로 비교적 쉽게 요구조건을 만족 시킬 수 있지만 Uniform Press를 가공과 조립으로만 요구조건을 만족시키기 위해서는 매우 높은 정밀도가 요구된다. 열 압착 방법은 고온에서 동작되므로 열 변형에 대한 기계적인 오차를 고려하여 설계, 가공, 조립이 진행되어야하므로 많은 어려움이 따른다. 본 연구에서는 Air 스프링과 Metal Form의 자가 보정장치를 이용하여 가공, 조립, 열 변형으로 발생하는 기계적 오차를 보상하여 성능과 신뢰성을 향상시켰다. The bonding process should be achieved in vacuum environment to avoid air bubble. In this study, we studied about pressure uniformity that became an issue in thermo compression bonding usually. Uniform press is realized by the method that use air spring and metal form spring. The concept of uniform press using air spring is removed except pressing direction in the press processing so angle between the vector of pressure surface and the pressure axis is parallel automatically. Air spring compensate the errors of machining and assembly. Metal form compensate the thermal deformation and flatness error.
송준엽(Jun Yeob Song),하태호(Tae Ho Ha),이창우(Chang Woo Lee),김동훈(Dong Hoon Kim),전종(Jong Jeon) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.2
폰 카메라용 렌즈모듈을 구성하는 각 단렌즈의 방향성을 고려한 자동 조합시스템을 개발하였다. 먼저 유동해석을 통하여 렌즈모듈의 조합성 도출 영향인자인 복굴절과 사출성형 조건의 상관성 및 조립 방향성에 따른 수율의 관계를 조사 하였다. 하나의 조립모듈에서 렌즈와 스페이서의 한 세트를 조립하도록 설계하여 생산성 향상 및 장비크기를 최소화하여 기존 장비의 약 25 %정도로 축소가 가능하였다. 또한, 기구적인 정렬기구인 센터링 기구 및 배럴가이드 적용하여 추가적인 비전시스템 없이 사이클 타임의 단축이 가능하였다. 개발한 시스템은 모듈러 설계를 통하여 픽커 및 가이드 등 일부 부품만의 교체로 생산모듈 변경에 대응 가능하도록 하여 급변하는 시장변화 및 소량생산에도 적용 가능하도록 제작되었다. An automatic combination and assembly system for phone-camera lens modules was developed. The system enables the assembly of the relative orientation of the individual lenses making up the lens module. Conventional assembly systems assemble a lens module from eight assembly units. The developed system reduces this number to half by combining each lens and a spacer into a single assembly unit. Also, the number of transfer stages for sequential assembly is minimized without increasing the assembly time. Therefore, high productivity and a footprint that is only about 25 % of that of a conventional assembly system can be realized. The system features a modular design to allow it to cope with rapid changes in the market. Only a few components, such as the picker and guide, need to be replaced for changing to a new assembly model.