http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생활쓰레기 소각(燒却)비산재로부터 $CaCO_3$ 제조(製造)에 관한 연구(硏究)
최우진,박은규,Choi, Woo-Zin,Park, Eun-Kyu 한국자원리싸이클링학회 2006 資源 리싸이클링 Vol.15 No.5
The total amount of ash generated from the municipal solid waste incineration(MSWI) in Korea was approximately 420,000 tons in 2005 including 68,000 tons of fly ash. Fly ash from MSWI generally contains high amount of CaO (upto ${\sim}50%$) due to the treatment of flue gas by spraying CaO-base materials. Currently, most of fly ash generated is finally ended up with specially designed landfill sites and only less then 20% of fly ash is recycled. In the present work, preparation of $CaCO_3$ from the MSWI ny ash was studied to promote the fly ash recycling. Fly ash obtained from the dust collector in stoker-type MSWI is used to selectively dissolve CaO by using the sugar solution. Then, $CO_2$ gas was passed through the dissolved solution to pro- duce $CaCO_3$ powder. The optimum conditions for CaO dissolution were solid content 10%, reaction time 15 minutes, sugar concentration $10{\sim}15%\;and\;pH\;10.5{\sim}11.0$. The high grade $CaCO_3$ powder was obtained and the experimental conditions are also discussed. 국내 생활쓰레기 소각시설에서 발생되는 소각재의 양은 2005년 경우 약 420,000톤에 달하고 있으며, 그중 비산재 발생량은 약 68,000톤에 달하고 있다. 비산재는 지정폐기물로 분류되어 일반적으로 고형화 및 안정화 처리 후 매립되고 있으며, 단지 발생량의 약 20%만이 재활용되고 있다. 비산재의 경우 CaO의 함량이 50%까지 이르고 있으며, 그 이유는 배가스 처리시 CaO를 기본으로 하는 물질을 다량으로 사용하기 때문이다. 본 연구에서는 비산재에 함유되어 있는 CaO를 회수하여 $CaCO_3$ 분말을 제조하기 위한 기초실험을 수행하였다. CaO를 선택적으로 용해하기 위하여 설탕용액을 사용하였으며, 기초 실험결과에 의하면 CaO용해를 위한 최적조건은 비산재 농도 10%, 반응시간 15분, 설탕농도 $10{\sim}15%$ 및 적정 pH는 $10.5{\sim}11$로 나타났다. $CaCO_3$ 분말은 회수된 CaO 용해액에 $CO_2$가스를 주입시켜 제조하였으며 회수된 $CaCO_3$ 백색도는 매우 우수한 것으로 조사되었다.
최우진,이진우,곽윤해,Choi, Woo-Jin,Lee, Jin-Woo,Kwak, Yoon-Hae 대한족부족관절학회 2007 대한족부족관절학회지 Vol.11 No.1
Purpose: The objective of this study was to report the outcomes of patients treated with extracorporeal shock wave therapy (ESWT) for refractory plantar fasciitis of the foot. Materials and Methods: From November 2005 to October 2006, a total of sixty-two patients with refractory plantar fasciitis were treated with extracorporeal shock wave therapy. The main outcome measurements were visual analogue scale (VAS) and Roles and Maudsley score evaluated before treatment and at one and six months after treatment. Results: Roles and Maudsley score was excellent (0%), good (6.4%), fair (35.4%) and poor (58.2%) before treatment which improved to excellent (56.5%), good (38.7%), fair (4.8%) and poor (0%) at final follow-up. VAS scores also significantly improved after ESWT (p<0.05). There was no statistically significant correlation between clinical results and body mass index (BMI) (p=0.102). Conclusion: Extracorporeal shock wave therapy appears to be an effective and safe treatment modality for refractory plantar fasciitis and may help the patient to avoid surgery for refractory heel pain.
양자 교환막형 연료전지의 등가 임피던스 모델을 이용한 인버터에 의한 맥동 전류의 영향에 관한 연구
최우진,Choi, Woo-Jin 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.6
본 논문에서는 인버터에서 발생하는 맥동전류가 양자 교환막형 연료전지에 미치는 영향을 임피던스 모델을 통하여 분석한다. 제안된 방법은 주파수 응답 분석법을 이용하여 연료전지 스택의 등가 임피던스를 유도하고, 유도된 모델을 이용하여 맥동전류의 영향을 분석한다. 모델을 통해 계산된 결과는 상용 연료전지 스택을 사용한 실험을 통하여 증명된다. 실험결과는 인버터에 의해 발생한 맥동전류로 인해 최대 10(%)까지 연료전지 스택의 출력이 감소할 수 있음을 보인다. In this paper the effects of inverter ripple currents to the Proton Exchange Membrane Fuel Cell Stack (PEMFCS) is analyzed by the impedance model. The proposed method employs the frequency analysis technique to derive an equivalent impedance model of the fuel cell stack and the effects of the inverter ripple current are investigated. The calculated results m then verified by means of experiments on commercially available PEMFCSs. The experimental results show that the ripple current can contribute up to 10[%] reduction in the available output power.
디지털 방식의 인접면 접촉강도 측정장치의 개발 및 평가
최우진,김경화,김진아,강동완,오상호,Choi, Woo-Jin,Kim, Kyung-Hwa,Kim, Jin-A,Kang, Dong-Wan,Oh, Sang-Ho 대한치과보철학회 2007 대한치과보철학회지 Vol.45 No.5
Statement of problem: The proper contact relation between adjacent teeth in each arch plays an important role in the stability and maintenance of the integrity of the dental arches. Proximal contact has been defined as the area of a tooth that is in close association, connection, or touch with an adjacent tooth in the same arch. Purpose: The aim of this study was to develop a digital device for measuring the proximal tooth contact tightness by pulling a thin stainless steel strip (2mm wide, 0.03mm thick) inserted between proximal tooth contact. Material and method: This device consists of measuring part, sensor part, motor part and body part. The stainless steel strip was connected to a stain gauge. The strain gauge was designed to convert the frictional force into a compressive force. This compressive force was detected as a electrical signal and the electrical signal was digitalized by a A/D converter. The digital signals were displayed by a micro-processor. The pulling speed was 8mm/s. Results: For testing reliability of the device in vivo, two healthy young adults (A, B) participated in this experiment. The tightness of proximal tooth contact between the second premolar and the first molar of mandible (subject A) and maxilla (subject B) was measured fifteen times for three days at rest. We double-checked the accuracy of the device with a Universal Testing Machine. Output signals from the Universal Testing Machine and the measuring device were compared. Regression analysis showed high linearity between these two signals. In vivo test, no significant differences were found between measurements. Conclusion: This device has shown to he capable of producing reliable and reproducible results in measuring proximal tooth contact. Therefore, it was considered that this device was appropriate to apply clinically.
La<sub>2</sub>O<sub>3</sub> 첨가에 따른 BaTiO<sub>3</sub>의 미세구조 및 유전특성
최우진,문경석,Choi, Woo-Jin,Moon, Kyoung-Seok 한국결정성장학회 2020 韓國結晶成長學會誌 Vol.30 No.3
The effect of La<sub>2</sub>O<sub>3</sub> addition on the crystalline phase, microstructure, and dielectric properties of BaTiO<sub>3</sub> has been studied as a function of the amounts of La<sub>2</sub>O<sub>3</sub>. 0.3 mol% TiO<sub>2</sub>-excess BaTiO<sub>3</sub> powder was synthesized by solid-state reaction, and then the powder compacts with various amounts of La<sub>2</sub>O<sub>3</sub> were sintered at 1250℃ for 2 hours. Room temperature XRD showed changes in the lattice parameters and a decrease of tetragonality (c/a) as the amounts of La<sub>2</sub>O<sub>3</sub> increased. It can be explained that the phase transition from tetragonal to cubic phase occurred because La<sup>3+</sup> replaced Ba<sup>2+</sup> site, which increased the instability of the tetragonal phase. As La<sub>2</sub>O<sub>3</sub> was added over 0.1 mol%, the critical driving force for growth (Δg<sub>c</sub>) increased over maximum driving force (Δg<sub>max</sub>). As the result, the grain size decreased with La<sub>2</sub>O<sub>3</sub> addition. Dielectric constant decreased as the amounts of La<sub>2</sub>O<sub>3</sub> increased, which was analyzed with crystal structure and microstructure. La<sub>2</sub>O<sub>3</sub> 첨가량에 따른 결정상 및 미세구조 변화와 유전특성과의 상관관계에 대해 연구하였다. 고상반응법을 이용해 합성된 0.3 mol% TiO<sub>2</sub> 과잉 BaTiO<sub>3</sub> 분말에 대해 La<sub>2</sub>O<sub>3</sub> 첨가량을 다르게 첨가하여 1250℃에서 2시간 동안 소결되었다. 상온에서 측정된 XRD는 La<sub>2</sub>O<sub>3</sub> 첨가량이 증가함에 따라 lattice parameter가 변화하였고, 정방정비가 감소하였다. 이는 La<sup>3+</sup>가 Ba<sup>2+</sup> 자리에 치환되어 정방정상의 불안정성을 높여 입방정상으로 상전이 된 것으로 설명할 수 있다. La<sub>2</sub>O<sub>3</sub> 첨가량이 증가할 때, 임계입자성장구동력(Δg<sub>c</sub>)이 최대 입자성장구동력 (Δg<sub>max</sub>)보다 높아져, 입자크기와 밀도가 감소하였다. 유전상수는 La<sub>2</sub>O<sub>3</sub>가 증가함에 따라 감소하였는데, 이를 결정상 및 미세구조의 변화에 대한 효과로 분석하였다.
생활쓰레기 유동상(流動床) 소각로(燒却爐) 불연물(不燃物)의 재활용에 관한 연구(硏究)
최우진,박은규,강승균,Choi, Woo-Zin,Park, Eun-Kyu,Kang, Seung-Kyun 한국자원리싸이클링학회 2008 資源 리싸이클링 Vol.17 No.4
국내의 경우 2006년 유동상 소각로에서 발생한 소각재는 약 13,952톤에 달하고 있으며, 대부분 자력선별 후 매립처리 되고 있는 실정이다. 본 연구에서는 유동상 소각로에서 발생한 불연물로부터 분리 회수한 무기물 시료와 점토를 일정비율로 배합하여 소결체를 제작하였으며, 물성평가를 통하여 세라믹스(요업)원료로서의 재활용 가능성을 검토하였다. 체가름 및 자력선별 후 회수된 불연물 시료에 대한 중금속 함량 분석결과 Pb 등 일부 중금속의 농도는 여전히 높게 나타났으나 $Cr^{6+}$의 경우는 0.4ppm이하로 낮게 나타났으며, 용출실험결과는 모두 KSLP 기준치 이하로 조사되었다. 최종 회수한 불연물 시료의 XRF 분석결과 금속산화물이 선별공정에서 효율적으로 제거된 것으로 조사되었다. 회수된 불연물 시료를 점토와 일정비율로 배합하여 제조된 소결체의 물성조사 결과 $1,000^{\circ}C$ 및 $1,050^{\circ}C$에서 소성한 제품의 경우 불연물을 첨가하면 융제로서의 역할이 가능하여 소성온도를 약 $50^{\circ}C$정도 낮출 수 있다. 또한, 불연물의 첨가량이 증가할수록 소성수축률 및 흡수율이 낮아져서 소결체의 압축강도가 개선되었다. The total amount of fluidized bed incinerator ash, i.e. incombustion materials generated from the municipal solid waste incineration(MSWI) in Korea was approximately 14,000 tons in 2006. Most of the ash after ferrous metal separation is finally discard to the landfill sites. In the present work, possibility for recycling of the ash is studied to utilize the ash as raw materials for ceramic products. Incombustion materials obtained from the two different incinerators were used to recover the raw materials by applying the magnetic separation and screening process to remove metallic particles. The raw materials show relatively low heavy metals content obtained from the KSLP leaching tests. The ceramic products were prepared by mixing the clay with the various amounts of the raw material. The physical properties, i.e. shrinkage rate, absorbancy and compressive strength of the ceramic products sintered at $1,000^{\circ}C$ and $1,050^{\circ}C$, respectively were improved by increasing the addition amounts of the incinerator ash. Based on the leaching tests the ceramic products also be satisfied with the standard limits on the leachability of heavy metals because most of the metallic materials are effectively removed from the incombustion materials by appling the separation processes.
연료전지 시스템을 이용한 Line-Interactive 방식의 무정전 전원 공급 장치의 설계
최우진,전희종,Choi, Woo-Jin,Jeon, Hee-Jong 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.6
본 논문에서는 연료전지와 컨버터 모듈을 채용한 1-[KVA] 용량의 Line-interactive방식의 무정전 전원 공급장치(UPS)가 제안된다. 제안된 시스템은 두 개의 500[W]급 양자 교환막형 연료전지에 DC/DC 컨버터가 결합된 모듈을 채용하며, 이 모듈들이 인버터의 DC-Link를 공유한다. DC-Link에는 슈퍼커패시터 모듈이 채용되어 출력의 변동이나 연료 개질기의 느린 동특성으로 인한 연료전지와 부하 사이의 순시적인 전력의 불균형을 개선시킨다. 또한 슈퍼커패시터에 저장된 에너지는 단시간 동안의 과부하를 처리할 때에도 사용될 수 있다. 제안된 시스템은 배터리를 사용하지 않으므로 환경친화적이며 청정 에너지원에 대한 요구를 만족시킨다. 1-[KVA] 시스템의 설계 예가 제시되며, 1시간의 정전동안 부하에 전력을 공급하기 위해 필요한 수소의 양과 보상용 슈퍼커패시터의 용량을 계산하는 방법이 소개된다. In this paper the design of a 1-[KVA] fuel cell powered line-interactive UPS system employing modular (fuel cell & DC/DC converter) blocks is proposed. The proposed system employs the two fuel cell modules along with suitable DC/DC converters and these modules share the DC-Link of the DC/AC inverter. A supercapacitor module is also employed to compensate for the instantaneous power fluctuations and to overcome the slow dynamics of the fuel processor. The energy stored in the supercapacitor can also be utilized to handle the overload conditions for a short time period. Due to the absence of batteries, the system satisfies the demand for an environmentally friendly and dean source of the energy. A complete design example illustrating the amount of hydrogen storage required for 1hr power outage, and sizing of supercacpacitor for transient load demand is presented for a 1-[KVA] UPS.
관절경적 미세골절술이 실패한 거골의 골연골 병변에 대한 치료로서의 재차 미세골절술
최우진,박광환,이모세,정광호,이진우,Choi, Woo Jin,Park, Kwang Hwan,Lee, Moses,Chung, Kwangho,Lee, Jin Woo 대한족부족관절학회 2015 대한족부족관절학회지 Vol.19 No.2
Arthroscopic treatment has been reported to provide effective improvement of ankle function when used in treatment of small osteochondral lesion of talus; however, favorable long-term results have been less predictable for large osteochondral lesion of talus. In cases in which primary arthroscopic treatment fails, the decision regarding which subsequent technique to choose has become increasingly difficult, as good clinical outcomes may be unlikely for such patients irrespective of the surgical technique used. Redomicrofracture should be used judiciously for treatment of osteochondral lesion of talus in which arthroscopic treatment has failed.
재활용(再活用) 대상(對象) 폐자원( 廢資源)의 물리적(物理的) 성상(性狀) 분석(分析)에 관한 연구(硏究)
최우진,윤균덕,Choi, Woo Zin,Yoon, Kun Duk 한국자원리싸이클링학회 2012 資源 리싸이클링 Vol.21 No.5
일반적으로 재활용대상 폐자원은 가정에서 분리 배출된 후 재활용선별장에서 수선별에 의해 유가자원으로 회수된다. 그러나 기존의 재활용선별장에 반입되는 폐자원의 경우 성상이 매우 다양하고 복잡 할 뿐만 아니라 이물질의 함량이 높아 기존의 회수방법으로는 선별효율이 매우 낮은 실정이다. 따라서 선별장에서 재활용품 회수 후에 발생되는 잔재물은 대부분 매립 또는 소각되고 있어서 그로인한 2차환경오염 및 잔류물로부터 추가적인 유가자원의 회수는 시급히 해결해야 할 문제이다. 본 연구에서는 재활용선별장에 반입되는 폐자원에 대한 성상조사를 실시하여 폐자원의 발생특성 변화를 파악하였으며, 전처리시설의 효율성을 증대시키기 위하여 입도분석을 통하여 향후 재활용 선별시설 구성의 기초자료를 제공하였다. In general, recyclable items are separately discharged from households and then, hand-sorted into different types of valuables at materials recovery facilities (MRF). However, most of residues after hand-sorting are finally end up with landfill and/or incineration due to lack of separation technologies and economical reasons. In the present study, physical properties on recyclable items obtained from an MRF are investigated to improve the recovery of valuable items. The results of physical compositions based on the sizing tests are also presented.
최우진,사정신,최형연,Choi, W.J.,Sha, S.J.,Choi, H.Y. 대한의용생체공학회 2009 의공학회지 Vol.30 No.5
Due to the aging effect, older people have relatively weaker muscular performance, less range of motion in the joint articulation, and the lower sense of equilibrium than younger people. These factors attribute to their slow and clumsy ingress/egress motion. In order to analyze ingress/egress motion strategy of the elderly, healthy thirty 65 or more years old volunteers were recruited. The health condition of the each volunteer was verified by the medical checkup and also their physical capabilities were quantified by six fitness tests. Through the video analysis, older driver's ingress/egress motion strategies were classified and statistically investigated. For a comparison purpose, another thirty young volunteers also participated in the same test protocol and their ingress/egress motion strategies were also included in the statistical analysis.