http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
1:5000 수치지형도를 이용한 ASTER DEM, SRTM DEM의 정확도 검증
강경호(Kyung-Ho Kang),손홍규(Hong-Gyoo Sohn),정재훈(Jae-Hoon Jung),최시경(Si-Kyong Choi) 대한공간정보학회 2009 한국지형공간정보학회 학술대회 Vol.2009 No.9
본 논문에서는 국토지리정보원에서 제작한 1:5000 수치지형도에서 추출한 등고선을 이용하여 생성된 DEM과 최근 세계 모든 지역의 3차원 DEM 정보를 제공하고 있는 SRTM DEM과 ASTER DEM을 대상으로 한반도 지역의 DEM 구축 정확도를 평가하였다. 이를 위하여 먼저 대상지역의 1:5000 수치지형도를 통해 DEM을 생성하고 동일한 지역의 SRTM DEM과 ASTER OEM을 취득하여 상호 중첩비교가 용이하도록 동일한 투영방식으로 변환하였다. 특히, 한반도 지형특성을 고려하여 산악지역, 평지, 산악지역과 평지가 적절하게 분포하고 있는 설악, 안양, 진안 세 지역의 DEM 구축 정확도를 비교분석하였다. 본 연구에서는 자료수집과정에서 발생한 국부적인 hole(void) 등을 제거한 filled finished SRTM OEM을 활용하였다. DEM 구축 정확도 비교는 수치지형도 등고선을 기반으로 구축된 DEM을 기준으로 SRTM DEM과 ASTER DEM의 통계적 분석과 각 DEM의 동일 픽셀간 RMSE를 비교하였으며, 그 결과 두 DEM 자료 모두 수치지형도 DEM과의 상대적인 오차가 약 11~12m로 나타났다. 특히 30m 해상도의 ASTER DEM은 향후 한반도 전역의 DEM 3차원 정보 구축 등에 충분히 활용할 수 있을 것으로 기대된다.
위당문,최시경 대한금속재료학회(대한금속학회) 1989 대한금속·재료학회지 Vol.27 No.2
A 25Cr-20Ni austenitic steel containing 0.59 wt % nitrogen was aged at 973, 1023, 1073 and 1123K to study the growth features of the cellular precipitation of Cr₂N. Experimentally determined were volume fraction of the cell, averge migration rate of cell boundaries, and averge concentration of nitrogen in the untransformed matrix. The partitioning of nitrogen between the cell and the untransformed matrix was computed on the basis of those data. The average concentration of nitrogen within the cell is higher than initial concentration of nitrogen at the onset of the cellular reaction. It decreases linearly with the increasing volume friction of cell and its gradient increases as the aging temperature decreases. At a given aging temperature, it is determined by the average concentration of nitrogen in the untransformed matrix, irrespective of the initial concentration of nitrogen.
질소함량과 온도변화에 따른 Type 316L 스테인리스 강의 저주기 피로거동
김대환,홍준화,최시경,류우석,국일현 대한금속재료학회(대한금속학회) 1998 대한금속·재료학회지 Vol.36 No.10
Strain controlled low cycle fatigue (LCF) tests were conducted in the temperature range between R.T. and 600℃ in type 316L stainless steels with different nitrogen contents. Fatigue life decreased and cyclic stress increased with increasing temperature due to dynamic strain ageing (DSA) at the temperature range of 300∼600℃. The dislocation structures were changed from cell to planar by increasing effect of DSA and short range order(SRO) with increasing temperature and nitrogen addition. Since nitrogen reduced the chromium diffusion coefficients, nitrogen retarded DSA, which resulted in decrease in LCF life at high temperature. So, fatigue life increased with nitrogen addition due to the retardation of DSA and planar slip by SRO.
질소를 첨가한 Type 316L 스테인리스 강의 동적변형시효 거동
김대환,홍준화,최시경,류우석,국익현 대한금속재료학회(대한금속학회) 1998 대한금속·재료학회지 Vol.36 No.3
Tensile tests were conducted with varying strain rate (1×10^(-2)/sec∼2×10^(-4)/sec) at the test temperature range between room temperature and 750℃ to evaluate the effect of nitrogen on dynamic strain aging (DSA) behaviors in nitrogen added type 316L stainless steels. Yield and tensile strength increased without reduction of elongation with adding nitrogen. The temperature range and the critical strain for DSA increased with nitrogen addition. Types A and B serrations were observed at 600℃ and the strain for transition from type A to type B increased with nitrogen addition. Solute atoms for DSA were vacancies and chromium and the activation energy for DSA increased with adding nitrogen. The reason that nitrogen retarded DSA was explained by the fact that nitrogen reduced the chromium diffusion to dislocations due to the strong interaction between nitrogen and chromium.
홍원희,이인식,박승빈,최시경,최동구 한국화학공학회 1997 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.35 No.3
진동밀에 의한 분쇄가 TiO₂분말의 특성에 미치는 영향에 관하여 조사함으로써, 나노페이즈 타이타니아 입자의 제조 가능성을 검토하였다. 평균 입자 크기는 분쇄전 3.42㎛에서 분쇄 초기에는 크게 감소하다가 0.2㎛의 일정한 값에 접근하였으며, 입도 분포는 분쇄 시간이 길어질수록 점차 좁은 분포를 가졌다. X선 회절 도형 관찰 결과 분쇄 시간에 따라 회절선의 폭이 점점 넓어짐이 관찰되었다. 결정자의 크기는 분쇄전의 600㎚에서 분쇄초기에 급속히 감소하다가 대략 20 ㎚에 접근하는 반면, 불균일 변형률은 분쇄 시간에 따라 계속 증가하는 경향을 보임을 알 수 있었다. 따라서, TiO₂ 분말을 진동밀에서 분쇄하여 나노페이즈 크기의 분말을 제조할 수 있음을 확인할 수 있었다. The possibility of preparing nanophase titania powder was examined by investigating the effect of vibratory milling on the characteristics of TiO₂ powder. The starting powder with a mean particle size of 3.42㎛ showed a fast rate of particle-size-reduction at the early stage of milling. By further milling, the milling rate decreased significantly and the mean particle size approached a constant value of 0.2 ㎛. Prolonged milling produced narrower particle size distribution. According to XRD results, it was observed that the diffraction lines became broader with increasing milling time. The crystallite size of 600 ㎚ at a starting powder decreased rapidly at the early stage of milling and it approached nanophase region of about 20 ㎚. Nonuniform strain increased continuously with milling time. The results show that nanophase titania powder was prepared by vibratory milling.
김수영,남태운,박윤우,최시경 대한금속재료학회(대한금속학회) 1978 대한금속·재료학회지 Vol.16 No.1
球狀黑鉛鑄鐵을 製造할 때 珪素의 影響은 本 鑄鐵의 性質을 左右하는데 매우 重要하다. 따라서 珪素의 基地組織에 미치는 定性的인 硏究는 있으나 이것의 定量的인 硏究는 거의 없다. 本 硏究에서는 炭素量을 一定하게 하고 珪素의 영향을 特히 基地組織에 미치는 영향을 多角度로 檢討하여 그 定量化를 시도하였다. 本 硏究를 通하여 얻은 重要한 結論은 다음과 같다. 1. Pearlite量은 試料의 直徑을 10, 20, 30㎜φ로 變化시켰을때 각 試片의 珪素量이 0.1% 增加함에 따라서 亞共晶區域에서는 4.0%, 過共晶區域에서는 1.8%정도 減少한다. 2. Ferrite量은 試料의 直徑이 10, 20, 30㎜φ로 變化할때 珪素 0.1% 增加함에 따라서 亞共晶區域과 過共晶區域에서 各各 4.3%, 1.6% 정도 증가 한다. 3. 基地組織에 미치는 영향은 珪素量의 영향이 冷却速度의 영향보다 크다. The effects of silicon and cooling velocity on the matrix structure of spheroidal graphite cast iron have been studied. In the preparation of spheroidal graphite cast iron, Fe-Si-Mg and Fe-Si alloys were used as additive and inoculant respectively. The important results obtained in this study are as follows. (1) As the silicon content is increased by 0.1% in samples with diameter of 10, 20 and 30mm, the amount of pearlite decreases by 4% in hypo-eutectic region but by 1.8% in hyper-eutectic region. (2) However, the amount of ferrite is increased by 4.3% in hypo-eutectic but 1.6% in hyper-eutectic region per 0.1%Si addition in the same samples having various diameters such as 10, 20 and 30mm. (3) The effects of silicion content are larger than those of cooling velocity on the matrix structure.
김수영,김효준,남태운,박윤우,최시경 대한금속재료학회(대한금속학회) 1978 대한금속·재료학회지 Vol.16 No.3
球狀黑鉛鑄鐵의 機械的性質에 미치는 要因들이 많으나 特히 球狀黑鉛의 크기, 粒子數 및 球狀化率의 影響은 가장 重要한 要因들이라 하겠다. 本 硏究에서는 炭素 및 珪素의 量이 球狀黑鉛에 미치는 영향을 多角度로 調査 檢討하여 그 定量化를 시도 하였다. 다음은 本 硏究를 通하여 얻은 主要한 結論이다. 黑鉛에 미치는 炭素 및 珪素의 영향은 대단히 크며 作用하는 機構는 顯著하게 다르다. 卽, (1) 炭素量은 黑鉛의 成長에 크게 影響을 주며 炭素 및 珪素가 增加할수록 黑鉛의 크기가 크게 된다. (2) 珪素는 黑鉛의 成長에 影響을 주는 것이 아니라 黑鉛의 核 生成에 크게 기여한다. In the spheroidal graphite cast iron, the effect of carbon and silicon on the state of graphite were examined quantitatively at different levels of carbon and silicon contents. The principal results obtained from this study are as follows: The effect of carbon and silicon content on the size, shape and nodule counts of graphite are considerable; Carbon and silicon promotes the growth of graphite, whereas silicon contributes nucleation of graphite.