http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산화제 NaOCl와 $H_2O_2$를 이용한 광산배수 정화에 관한 연구
최승원,장윤득,김영훈,김정진,Choi, Seung-Won,Jang, Yun-Deug,Kim, Young-Hun,Kim, Jeong-Jin 대한자원환경지질학회 2010 자원환경지질 Vol.43 No.1
산화제를 이용한 광산배수 정화에 관한 연구를 위하여 옥동광산으로부터 채수한 갱내수와 침출수를 산화제인 NaOCl와 $H_2O_2$를 이용하여 반응 실험을 실시하였다. 초기 갱내수의 pH와 EC는 각각 5.77, 831 uS/cm 이며, Mg(23.25 mg/l), Mn(14.90 mg/l), Zn(22.99 mg/l)이다. 광미적치장으로부터 유출되는 침출수의 pH와 EC는 6.38, 1920 uS/cm이며, Mg(98.75 mg/l), Mn(3.38 mg/l), Zn(6.16 mg/l)로 갱내수와 다른 양이온 농도 특성을 갖는다. 산화제의 종류와 양에 따라 양이온이 제거 되는 데 소요되는 시간적 차이가 있지만, 갱내수와 침출수에 포함된 Mg, Zn, Mn은 99%이상 제거되었다. Visual MINTEQ 계산결과 포화지수가 0보다 큰 값을 나타내는 화합물이 존재하지 않기때문에 초기 갱내수와 침출수로부터 침전 가능한 광물은 존재하지 않는다. 갱내수와 광미적치장 침출수를 NaOCl과 반응시킬 때 생성되는 침전물은 적갈색의 Mangano-calcite이며, 그 외 Calcite magnesian, Calcite 등의 광물을 포함하고 있다. Mine and leachate waters were collected from the Okdong mine for study on reaction with oxidizing agents such as NaOCl and $H_2O_2$. The pH and EC of the mine and leachate waters are 5.77, 831 uS/cm, and 6.38, 1920 uS/cm, respectively. The concentrations of Mg, Mn, and Zn are 23.25 mg/l, 14.90 mg/l, and 22.99 mg/l for the mine water and 98.75 mg/l, 3.38 mg/l, and 6.16 mg/l for the leachate water. The concentrations of Mg, Mn and Zn decreased after the reaction with the oxidizing agents and mine water. The concentrations of Mg, Mn and Zn rapidly decreased when oxidizing agents increased. The saturation indices that were computed by visual MINTEQ for initial mine and leachate water were undersaturated with Mg, Zn and Mn compounds. The precipitates after the reaction with the oxidizing agents are composed mainly of mangano-calcite[(Mn, Ca)$CO_3$] with small amount of calcite-magnesian and calcite.
유로코드 2 재료모형을 사용한 철근콘크리트 부재의 연성도 평가
최승원,Choi, Seung Won 대한토목학회 2015 대한토목학회논문집 Vol.35 No.2
철근콘크리트 부재의 연성을 확보하기 위하여 콘크리트구조기준에서는 철근의 최소 허용 변형률에 대한 지침을 두고 있고, EC2에서는 중립축 깊이와 유효 깊이의 비(c/d)를 제한하고 있다. 일반적으로 철근콘크리트 부재의 연성 능력은 항복변위와 극한변위의 비로서 표현되는 변위 연성도를 통해 평가하는데, 변위 연성도를 정확하게 산정하기 위해서는 항복변위와 극한변위에 대한 정립이 필수적이다. 그러나 실제 부재의 변위는 부재의 다양한 특성에 영향을 받으므로 이들 값을 정확하게 산정하는 것은 어렵다. 이 연구에서는 철근콘크리트 부재의 항복변위 및 극한변위를 휨모멘트-휨곡률 관계를 통해 직접 계산하여 변위 연성도를 산정하였다. 해석의 주요 변수는 콘크리트 압축강도, 주철근 항복강도, 주철근 비, 횡철근 간격, 축력비 및 콘크리트 극한변형률이다. 해석 결과 콘크리트 압축강도가 증가할수록 변위 연성도는 증가하였다. 반면에 주철근의 항복강도, 주철근 비, 횡철근 간격 및 축력비가 증가할수록 변위 연성도는 감소하였다. 그리고 변위 연성도는 기둥의 내진설계에 사용되는 응답수 정계수(R)의 산정에 필수적이므로 변위 연성도를 정확하게 산정하는 것이 필수적이라고 판단된다. In concrete structural design provisons, there is a minimum allowable strain of steel to ensure a ductility of RC members and a c/d is limited for the same purpose in EC2. In general, a ductility capacity of RC members is evaluated by a displacement ductility which is a ratio of ultimate displacement to yield displacement, and it is necessary to calculate accurately a yield displacement and an ultimate displacement to evaluate a displacement ductility. But a displacement in members is affected by various member characteristics, so it is hard to calculate a displacement exactly. In this study, a displacement ductility is calculated by calculating a yield displacement and an ultimate displacement through a moment-curvature relationship. The main variables examined are concrete strength, yield strength, steel ratio, spacing of confinement, axial force ratio and concrete ultimate strain. As results, as a concrete strength is increased, a ductility displacement is increased. But as yield strength, steel ratio, spacing of confinement and axial force ratio are increased, a displacement ductility is decreased. And a displacement ductility is necessary to calculate a response modification factor (R) of columns for seismic design, so it is appeared that it is important to calculate a displacement ductility more accurately.
최승원,Choi, Seung-Won 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 논문집 Vol.21 No.6
The minimum reinforcement ratio is an important design factor to prevent a brittle failure in RC flexural members. A minimum reinforcement ratio is presented by assuming an effective depth of cross-section and moment arm lever in CDC and KHBDC. In this study, it suggests that a rational method for minimum reinforcement ratio is calculated by material model and force equilibrium. As results, a minimum reinforcement ratio using a p-r curve in KHBDC is evaluated about 52~80% of recent design code's value and it induces an economical design. And also, a ductility capacity in case of placing this minimum reinforcement amount is evaluated about 89% of recent design code's value, but ductility in a member is 7 or more, so it has a sufficient ductility capacity. Therefore, it is judged that a minimum reinforcement ratio using p-r curve has a theoretical rationality, safety and economy in a flexural member design. 철근콘크리트 휨부재의 최소철근비는 부재의 취성 파괴를 방지하기 중요한 설계 인자이다. 콘크리트구조기준과 도로교설계기준에서 사용되는 최소철근비는 단면의 유효 깊이 및 모멘트 팔길이에 대한 가정을 통해 산정되었다. 따라서 이 연구에서는 재료 모델과 힘의 평형 관계를 통해 합리적으로 최소철근비를 산정할 수 있는 방법을 제안하였다. 연구 결과 도로교설계기준의 포물-사각형 곡선을 통해 산정된 최소 철근비는 현재 설계 기준에 의한 최소철근비의 약 52~80% 수준으로 산정되어 경제적인 설계가 가능한 것으로 나타났다. 또한, 재료 모델을 통한 최소철근량이 배치된 부재의 연성 능력은 현재 설계 기준에 의한 값의 약 89% 수준으로 평가되었으나, 부재의 연성도는 7 이상으로 충분한 연성능력을 보였다. 따라서 제안된 포물-사각형 곡선을 통한 최소철근비는 휨부재 설계의 이론적 합리성 뿐만 아니라 안전성 및 경제성을 확보할 수 있는 것으로 나타났다.
트랜지션(Transition)을 활용한 모션그래픽 제작연구 -영화제 트레일러 제작을 중심으로-
최승원 ( Seung Won Choi ) 한국디지털영상학회 2010 디지털영상학술지 Vol.7 No.1
Today, mankind use moving images for effective communication. Moving images have strength that it can implicatively deliver information which is hardly delivered by a text. This communication form which has that strength has been developed into Motion Graphics in fields of visual communication and it is used as a powerful means for communication today. Motion Graphics is comprised in boundary of moving images because it is expressed as visual media like film and video as cinema and TV do. But Motion Graphics is a branch of expression style rather than branch of independent genre. Therefore it can easily integrate and merge with other visual media and genre. It is being rapidly extended and applied to TV, commercial, web, interactive graphic user interface and game. There is many diversity of opinions about definition and boundary of Motion Graphics but we should try to focus on the fact that Motion Graphics is being continuously extended and integrated with expression style of other form of the arts such as fine arts, photography, illustration, cinema and animation rather than try to define it. Artistic style is truly powerful and infinite if element of basic shape like line and figure and typography are merged and expressed together with different kind of art form therefore we should try to experiment and study to find that value. The purpose of this study is to experiment artistic style in Motion Graphic and verify possibility for practical use through the case of Motion Graphics that adopt transition effects as artistic style by closely looking the thinking and making process that motion designer try to reach to creative inspiration.
최승원(Choi, Seung Won) 한국부동산연구원 1998 부동산연구 Vol.8 No.1
종래 손실보상에 관한 논의는 공공필요에 의한 재산권의 수용사용 또는 제한 및 그에 대한 보상은 법률로써 하되, 정당한 보상을 지급하여야 한다 고 규정한 헌법 제23조 제3항을 근거로 하여 ‘行政上 損失補償’이라는 이름으로 다루어져 왔다. 헌법규정과 행정법학계의 입장은 근본적으로 ‘財産權侵害에 대한 補償’이라는 틀을 전제로 한다. 그러나 법률이 재산권을 침해하는 규정을 두면서 그에 대한 보상을 규정하지 않은 경우는 물론 생활침해나 생명·신체 등의 침해에 대해서도 그것이 特別한 犧牲에 해당하는 한. 이를 보상없이 방치하는 것은 형평에 반하고 당사자의 억울함을 증폭시켜 사회통합을 저해할 뿐더러 공익실현을 이유로 특별희생을 명하고 강제하는 공권력발동의 정당성의 기초가 크게 훼손되는 등 법적 정의관념에 반한다고 할 수 있다.
최승원(Choi, Seung Won) 한국디지털디자인협의회 2013 디지털디자인학연구 Vol.13 No.1
영상편집은 단순히 프리 프로덕션의 사전 계획에 의해 샷들을 자르고 연결하는 기계적인 공정이 아니다. 가장 좋은 샷을 선택하며 영상의 문법적 언어에 따라 창의적으로 샷을 배열함으로써 시간과 공간을 재단하고 관객이 영상에 몰입 할 수 있도록 리듬을 만들어내며 불연속을 연속으로 만드는 창조적인 작업이다. 영상제작에서 편집의 기여도와 중요성을 생각한다면 영상편집에 대한 교육 방법론에 대한 연구가 보다 활발히 이루어져야 함에도 불구하고 대학교육에서 영상편집에 대한 교육방법은 대부분 편집 툴의 기능습득 위주로 이루어지는 경향이 많다. 본 연구는 창의력향상과 편집기능의 습득이라는 두 가지의 궁극적인 목표를 모두 충족하는 방향으로 영상편집의 실습교육을 위한 9개의 실습예제를 개발하여 제시하였다. 할리우드식의 고전적 편집에 기초하고 있는 편집의 원리와 원칙들을 영화 역사의 고찰을 통해 재정립하여 이를 개념적 학습목표로 설정하고 연출, 촬영, 편집으로 이어지는 영싱제작프로세스의 유기적 연결성을 이해하기 위한 체험학습의 형태로 실습예제들을 디자인하였다. Editing is not just mechanical process by cutting and joining shot followed by prearranged plan of pre-production. Editing is creative process that cuts time and space by creatively arranged shot along with film grammar by choosing the best shot and it makes discontinuity to continuity and rhythm so that audience can be immersed in moving image. If we think about level of contribution of editing and how much important it is, the methodology of practical education about editing should actively study but unfortunately, the methodology of practical education of editing in collage is more focused on skills for the editing tools. On this study, nine educational modules are developed and suggested with the direction which is satisfied both improvement of creativity and technical skills about editing tools. The principle and rule of editing based on hollywood"s classical editing are defined by studied film’s history and these principle and rule are set as a conceptual educational goal and these nine modules are designed as an educational form for experience in order to understand systematic connection of making process wlich is connected by directing, shooting and editing.