http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최동호(Choi, Dong?ho) 한국비평문학회 2012 批評文學 Vol.- No.46
This paper aims to have a bird’s?eye view on Baek, Seok’s works who has reached the 100th anniversary and avoid the mistake of looking into the parts and not the whole. Paek, Seok was born at Jeong?ju, Pyeong?buk on July 1912 and lived a life of extreme ups and downs. He made his literary debut through annual spring literary contest of Chosun Daily newspaper on January 1930 when he was 19 and finished his publication of works with ‘Naruteo’(Ferry) on May 1962. After he went to a cooperative in Gwanpyong?ri, Samsoo?gun leaving the central literary circle on January 1959, he lived as a shepherd for more than 30 years of his later part of life. Having been brought into sudden prominence in the literary circle with his poem book Saseum(Deer) in 1936, Paek, Seok kept his literary reputation as a writer of juvenile stories by publishing fairy poem book Jipgene Ne Hyongje(Four Brothers of the Hermit Crabs, 1957) in the North Korea. However, he had to focus on children’s literature without the freedom of writing and he could not be reinstated to Pyongyang after he had received the ‘Red Letter’ in 1959. Referred as a genius poet, however, his life was ended tragically without beingable to write what he wanted to and criticized for his lack of loyalty and ‘vestige of bourgeois.’ Total unearthed poems of Paek, Seok are 148 including recent ones discovered by Song, Joon. More of his unearthed works will be included later. His proses are total 44 with the variety of novel, essay, review, political comment, translation, etc. He focused more on translation in the North Korea and they are 197 works of translated modern poems and 11 works of fairy poems. He translated 4 long novels including Silent Don 1, Silent Don 2 and 1 collected short novel and 2 short novels. Silent Don recently discovered with the help of professor Yoon, Hae?yeon is more than 1,000 pages and has an importance as the first direct translation fro Russian into Korean by Bake, Seok. More works of him will be unearthed as time goes on. However, with those newly unearthed works, the study on Baek, Seok’s literature has already reached a new phase. Now researchers have to include those works written in the North Korea. Unearthing the texts of important poets such as Baek, Seok is very meaningful for the study of modern Korean poetry. Considering the process of unearthing his works until now, more of his translated works will be found. However, his own creation has less possibility of being included in the list. Though there will be the difficulties such as the division of Korea into south and north, researchers should be able to get over them to continue the study of Baek, Seok.
최동호,장동일,최항용,Choi, Dong Ho,Chang, Dong Il,Choi, Hang Yong 한국강구조학회 1998 韓國鋼構造學會 論文集 Vol.10 No.4
직교로 보강된 판은 효율적인 하중분배능력과 좌굴안정성 때문에 장대교량의 강상판으로 사용되고 있다. 본 연구에서는 일축압축을 받는 직교로 보강된 판의 좌굴강도를 해석적 방법으로 추정하였다. 판이론을 사용하여 전체좌굴 및 부분좌굴과 같은 여러 모드에서의 좌굴응력식을 유도하고, 좌굴강도에 대한 횡리브와 종리브의 강성과 개수 등의 효과를 보이기 위하여 매개변수해석을 수행하였다. 정량적인 해석을 통해 종리브와 횡리브의 강성과 간격의 영향을 보였다. Orthogonally stiffened steel plates are used for orthotropic steel decks of long-span bridges because of high degree of flexural and torsional resistances and good load-distribution behavior. An analytic study is presented for evaluating the buckling strength of orthogonally stiffened plates subjected to uniaxial compression. By using the plate theory, the buckling stress under overall and partial buckling modes, is derived. Parametric studies are performed to show the effects of the stiffness and the number of transverse and longitudinal ribs on the buckling strength. The results show quantitatively strong influence of stiffness and spacing of longitudinal and transverse ribs.
강바닥판 종리브와 횡리브 교차부의 피로거동에 대한 종리브내 다이아프램의 영향
최동호,최항용,최준혁,Choi, Dong Ho,Choi, Hang Yong,Choi, Jun Hyeok 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.3
본 연구에서는 강바닥판의 실물 대형시험체를 제작하여 정적시험 및 피로시험을 실시하였다. 정적 및 영향면 재하시험 결과를 통하여 다이아프램의 유무에 따른 강바닥판 슬릿부의 면내와 면외응력을 검토하였으며, 피로시험결과로부터는 강바닥판의 피로거동, 피로균열의 발생과 진전에 대한 연구를 수행하였다. 다이아프램이 설치된 상세는 설치되지 않은 상세에 비하여 지점조건에 상관없이, 종리브 횡리브 교착부의 종리브측으로는 약 50%의 응력경감효과가 있으나, 횡리브측 하단부에는 오히려 상당히 큰 응력을 야기함을 알 수 있었으며, 피로균열 진전해석결과로부터는 슬릿부의 노치에 의한 초기균열길이가 피로균열성장에 상당한 영향을 끼치고 있음을 알 수 있었다. 측정자료와 FEM 해석을 통하여 공칭응력과 핫스폿응력에 의한 피로강도를 추정한 결과, 다이아프램이 설치되지 않은 상세는 규정된 피로등급에서 안전한 것으로 판단되나 다이아프램이 설치된 상세는 피로등급이하의 거동을 보였다. This study investigates the mechanical behavior on trough rib to crossbeam joint in orthotropic steel plate decks, specially emphasizing on the effect of diaphragm inside trough rib on the fatigue behavior of slit by static and fatigue tests. In particular, the effects of diaphragm on in-plane stress and out-of-plane stress, stress concentration, propagation of fatigue cracks at the silt are studied. With the result of experiment and numerical analysis, we have estimated the fatigue strength using the nominal stress and hot-sport stress. The details with diaphragm have occurred about 50% stress reduction at trough rib part of trough rib to crossbeam joint than the detail without diaphragm, however, the lower parts of crossbeam have occurred much more stress. Initial crack size or slit have an considerable influence on the propagation of fatigue cracks due to V-notch. The fatigue strength category of the details without diaphragm has higher value than fatigue limit, whereas that of the details with diaphragm is estimated lower than fatigue limit.
최동호,김대회,서희원,박수영,Choi. Dong Ho,Kim. Dae Hoi,Seo. Hee Won,Park. Soo Young 한국방재학회 2013 한국방재학회논문집 Vol.13 No.1
화재시 건물내의 연소확대를 방지하기 위한 방화구획 선상, 피난통로, 승강기 탑승 로비 등에는 방화문, 승강기 등을 설치하기 위한 개구부가 위치하게 된다. 건축물에서의 연소확대는 이와 같은 개구부를 통하여 이루어지기 쉬우므로 설치되는 개구부 방호 설비에 대한 관련 기준의 정비 및 보완이 중요하다. 특히 과거와는 달리 건물의 고층화, 대형화에 따라 피난용도로 사용되는 승강기의 용도가 중요시 되고 있으며, 이에 따른 승강기문에 대한 화재안전성이 요구되고 있으며, 또한 방화문 등에 설치되는 방화유리창도 화재시 연소확대방지를 위한 검토가 필요하다. 이에 본 연구에서는 외국의 방화용 승강기문과 방화유리창에 대한 성능기준을 검토하여 국내 관련 성능기준을 설정하기 위한 기초자료를 제시하고자 하였다. The openings for fire doors and elevator doors are installed on fire compartment to stem fire spreading, evacuation passage and elevator hoistway in building. Fire spreading tend to grow through these openings, so it is important to organize the standard related to opening protectives. Unlike in the past, due to being tall and large, the elevator for evacuation is being more important. For this reason, it is required for elevator door to be safe in fire and it is necessary for the glazing installed on fire doors to be reviewed with respect to fire spreading. In this study, foreign performance criterion of the fire elevator door and the fire-protection-rated glazing were reviewed and the base data for improving way about the fire performance criteria were suggested.
강바닥판 데크플레이트와 종리브 현장연결 스캘럽부의 피로강도 평가
최동호,최항용,Choi, Dong Ho,Choi, Hang Yong 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.6
본 연구에서는 국내에 적용된 강바닥판의 데크플레이트와 종리브 현장 연결 스캘럽부의 구조상세를 검토하고 실험체를 제작하여 정적재하실험 및 피로실험을 실시하였다. 또한 FEM 해석을 통하여 스캘럽 길이, 스캘럽 곡률반경, 데크플레이트 두께 등과 같은 매개변수가 종리브 스캘럽부의 응력에 미치는 영향을 살펴보았으며, 이를 통하여 스캘럽부에 대한 S-N선도를 추정하였다. 피로실험을 수행한 결과, 낮은 응력수준에서는 스캘럽부에서 피로균열이 발생하였고, 높은 응력수준에서는 핸드홀 덮개판의 파괴 후에 종리브의 갑작스런 파괴가 일어났다. 피로실험결과를 JSSC 피로등급과 Shigley와 Juvinall이 제안한 방법에 의한 피로강도와 비교검토한 결과, 데크플레이트와 종리브 현장연결 스캘럽부는 규정된 피로등급를 만족하였다. Static and fatigue tests were performed to evaluate fatigue strength in scallop at field bolted joints of longitudinal rib and deck plate in orthotropic steel decks. Numerical parametric studies using finite elemtn analysis were also conducted to show the influence of parameters such as length and radius of scallop, and thickness of deckplate on the stress concentration at the scallop. In the low stress level, fatigue tests yielded cracks at the scallop while in the high stress level, catastrophic failure of longitudinal rib occurred following the failure of handhole cover plate. Fatigue strength was compared with JSSC specification and the predicted S-N curves using Shigley and Juvinall methods, and a satisfactory result was obtatined.
강사장교 거더와 주탑에 하중저항계수설계법의 보-기둥 상관식을 사용한 내하율 산정식 적용
최동호,유훈,이범수,조선규,Choi, Dong Ho,Yoo, Hoon,Lee, Beom Soo,Cho, Sun Kyu 한국강구조학회 2007 韓國鋼構造學會 論文集 Vol.19 No.1
강사장교의 거더와 주탑은 축력과 모멘트를 동시에 받는 보-기둥 부재이기 때문에 단일 힘을 고려하는 일반도로교의 내하율 산정식은 강사장교의 거더와 주탑에 적용할 수 없다. 현재, 사장교의 거더와 주탑에 적용 가능한 이론적인 내하율 산정방법은 아직 정립되지 않았다. 본 논문에서는 축력과 모멘트를 동시에 받는 부재의 상관공식을 적용하여 강사장교 거더와 주탑의 내하율을 산정하기 위한 식을 제안하였다. 영향선해석을 수행하여 각 부재에 압축력 최대, 정 및 부모멘트 최대의 경우에 활하중 재하 형태를 결정하였고 각 부재의 내하율 산정절차를 정리하였다. 제안된 내하율 산정방법의 타당성을 검증하기 위하여 실교량 모델인 돌산대교에 대한 적용예를 제시하였다. 일반도로교의 내하율 산정식은 돌산대교 거더와 주탑의 내하율을 과대평가 하였으며, 제안된 내하율 산정식은 축력과 모멘트를 동시에 지지하는 사장교 거더와 주탑의 거동을 적절히 반영하였다. As girders and towers in cable-stayed bridges are subject to bending moments as well as axial forces, the conventional load rating equation, which considers only the single force effect, cannot be used to evaluate the rating factors of cable-stayed bridges. The load rating equation for components in cable-stayed bridges is not currently established yet. In this paper, we propose load rating equations for girders and towers in cable-stayed bridges using the interaction equations for beam-column members. Moving load analyses were performed for the cases of a maximum axial compressive force, maximum positive moment and maximum negative moment for each component in cable-stayed bridges and detailed procedures to apply proposed equations were presented. The Dolsan Grand Bridge was used to verify the validity of proposed equations. The conventional load rating equation overestimates rating factors of girders and towers in the Dolsan Grand Bridge, whereas proposed equations properly reflect the axial-flexural interaction behaviour of girders and towers in cable-stayed bridges.
장대레일 궤도의 온도좌굴 거동에 미치는 열차하중의 영향
최동호,김호배,Choi, Dong Ho,Kim, Ho Bae 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.6
The present study investigates the influences of vehicle induced loads on the thermal buckling behavior of straight and curved continuous welded rail (CWR) tracks. Quasi-static loads model is assumed to determine the uplift region, which occurs due to the vertical track deflection induced by wheel loads of vehicle. The lateral loads of vehicle induced by weight, the speed, the superelevation and curvature of track, and other dynamic vehicle track interaction, are included in the ratio of lateral to vertical vehicle load. Parametric numerical analyses are perfomed to calculate the upper and lower critical buckling temperatures of CWR tracks, and the comparison between the results of this work and the previous results without vehicle is also included. 본 연구에서는 궤도의 좌굴해석 및 그 결과를 통해 열차하중이 직선 및 곡선 장대레일 궤도의 온도좌굴 거동에 미치는 영향에 대해 평가하였다. 차량을 고려한 온도좌굴 해석은 바퀴하중하에서 장대레일 궤도의 수직 처짐에 기인한 상향처짐을 결정하기 위해 유사정적 하중모델을 가정하였으며, 차량의 무게와 속도, 궤도의 곡률, 캔트, 그외의 열차와 궤도의 동적인 상호작용으로 인한 횡방향하중은 열차의 수직하중에 대한 수평하중 비에 포함하여 수행하였다. 수치적 해석을 통해 장대레일의 상부 및 하부좌굴온도를 구하였고, 이런 해석결과들을 기존의 열차하중을 포함하지 않은 정적 좌굴해석결과들과 비교하였다.
최동호,서희원,Choi,Dong Ho,Seo,Hee Won 한국방재학회 2013 한국방재학회논문집 Vol.13 No.1
화재시 건물내의 연소확대를 방지하기 위한 방화구획 선상 및 피난통로 등에는 방화문, 방화셔터 등을 설치하기 위한 개구부가 위치하게 된다. 건축물에서의 연소확대는 이와 같은 개구부를 통하여 이루어지기 쉬우므로 설치되는 방화문 등 개구부 방호설비에 대한 관련 기준의 정비 및 보완이 중요하다. 현재 국내에서는 방화문의 경우 설치부위의 내화성능 등에 관계없이 비차열 1시간 성능만을 적용토록 하고 있어 화재 발생시에 충분한 연소확대방지를 기대하기 어려운 실정이다. 이에 본 연구에서는 외국의 방화문 성능기준을 검토하여 국내 방화문의 성능기준을 개선하기 위한 기초자료를 제시하고자 하였다. The openings for fire doors and fire shutters are installed on fire compartment to stem fire spreading and evacuation passage in building. Fire spreading tend to grow through these openings, so it is important to organize the standard related to opening protectives. In case of the fire door in Korea, its criteria is only integrity 1 hour regardless of fire resistance of a building member, therefore it is difficult to protect the fire spreading effectively. In this study, foreign performance criterion of the fire door were reviewed and the base data for improving way about the fire door performance criteria were suggested.
HSB 고성능 강재를 적용한 강합성 I-거더 정모멘트에 대한 휨저항강도 및 연성비
최동호,임지훈,Choi, Dong Ho,Lim, Ji Hoon 한국강구조학회 2014 韓國鋼構造學會 論文集 Vol.26 No.3
본 연구에서는 인장 플랜지에 HSB 고성능 강재를 적용한 강합성 복합단면 I-거더의 정모멘트에 대한 휨저항강도 및 연성 요구조건을 검토하였다. AASHTO LRFD 설계기준에서 강합성 거더의 정모멘트에 대한 공칭 휨저항강도 및 연성 요구조건은 소성모멘트와 소성 중립축을 이용하여 규정하고 있으며, 이때 소성모멘트와 소성중립축은 일반 강재에 대하여 유도된 값이다, 하지만 응력-변형률 거동에서 일반강재와 다르게 HSB 고성능 강재의 소성영역은 명확히 정의될 수 없다. 따라서 고성능 강재의 이상화된 응력-변형률 곡선을 통해 고성능 강재의 소성영역을 가정하여 소성모멘트를 정의하였으며, 다양한 치수를 갖는 임의의 단면에 대하여 수행된 수치 해석의 결과를 통해 인장 플랜지에 HSB 고성능 강재를 적용한 강합성 복합단면 I-거더의 연성 요구조건 및 공칭 휨저항강도 산정식을 제안하였다. In this study, flexural strength and ductility requirements of composite hybrid steel I-girder with its HSB(high performance steel for bridge) applied to tension flanges are examined in positive bending. In AASHTO LRFD specification, flexural strength and ductility requirements of composite I-girder in positive bending are specified in terms of plastic moment and plastic neutral axis that are derived from plastic behavior of conventional steel. However, plastic zone cannot be defined clearly from the stress-strain behavior of HSB unlike the behavior of conventional steel. Therefore, through idealized stress-strain curves of HSB, the plastic moment of composite hybrid steel I-girder with its HSB applied to tension flanges is defined by assuming the plastic zone of HSB. By using the consequences of numerical analysis regarding arbitrary cross-sections that have various dimensions, ductility requirements and flexural strength of composite hybrid I-girder with its HSB applied to tension flange are proposed.