광산지역 토양정밀조사 정도관리(QA/QC) 사례 연구

지원현,김종근,Ji, Won Hyun,Kim, Jong Keun 한국지하수토양환경학회 2014 지하수토양환경 Vol.19 No.3

A testing inspection is one of the important in the industry, owing to determine the reliability and directivity of testing inspection results. Therefore, the quality assurance and quality control (QA/QC) work which performed by personnel not directly in the inventory compilation development, in testing inspection must be thoroughly considered. Some agencies for environmental test inspection, they sometimes misunderstood that the QA/QC was ended with proficiency testing performance and on-site assessment by a director. Thus, results were often calculated without QA/QC work by self manual when conducting test. The objective of this study was to improve reliability of testing and inspection agency through the QA/QC case study which basically performed to raising reliability of testing and inspection agency. In this study, it increased reliability of result by verifying calibration curve (IC, ICV, CCV), blank, accuracy (LCS, MS) and precision as QA/QC performance, while performing investigation of soil contamination in mining areas. This study suggests that reliability establishing method of test result and management method of analysis process, through the QA/QC instance of testing agency.

손마사지가 허혈성 심질환 환자의 수면에 미치는 효과

현경선 ( Kyung Sun Hyun ),이향련 ( Hyang Yeon Lee ),백승남 ( Seung Nam Paik ),공송심 ( Song Cim Kong ),윤경자 ( Kyung Ja Yoon ),김현섭 ( Hyun Sub Kim ),김효남 ( Hoy Nam Kim ),최지원 ( Ji Won Choi ),김운정 ( Woon Jong Kim ) 경희대학교 동서간호학연구소 2002 동서간호학연구지 Vol.7 No.1

The purpose of this study was to investigate the effect of hand massage program on total sleep hours at night and satisfaction of sleep in clients with ischemic heart disease. The design utilized for this study was quasi-experimental with a nonequivalent control group non-synchronized design. The subjects were fifty-four patients, twenty-eight for the experimental and twenty-six for the control group, who were admitted with ischemic heart diease at cardiac intensive care unit in K medical center of K university. This study was carried out from May, 1999 to March, 2000. Hand massage was carried out at 8∼9 PM, once a day for 3 days. Total sleep hours at night were measured from 9 PM through 6AM next morning. Sleep hours of subjects were observed 30 minutes interval. Satisfaction of sleep was measured by Visual Analogue Scale(VAS) at 7 AM next morning. The collected data were processed by using the SPSS PC program and analyzed using χ2-test and repeated measures of ANOVA. The result of this study are as follows: 1. The total sleep hours at night of the experimental group were not higher than those of the control group. 2. The satisfaction of sleep of the experimental group was not higher than that of the control group. In conclusion, hand massage did not promoted sleep in ICU clients with ischemic heart disease.

실시간 전량 중합효소연쇄반응을 이용한 광산 배수의 수계 영향 평가

한지선(Ji Sun Han),서장원(Jang Won Seo),지원현(Won Hyun Ji),박현성(Hyun Sung Park),김창균(Chang Gyun Kim) 大韓環境工學會 2010 대한환경공학회지 Vol.32 No.2

알럼 슬러지 기반 흡착제를 이용한 수용액상 불소 및 비소 흡착에 관한 연구

이준학,지원현,이진수,박성숙,최궁원,강찬웅,김선준,Lee, Joon Hak,Ji, Won Hyun,Lee, Jin Soo,Park, Seong Sook,Choi, Kung Won,Kang, Chan Ung,Kim, Sun Joon 대한자원환경지질학회 2020 자원환경지질 Vol.53 No.6

본 연구에서는 정수 처리장 침전지에서 채취한 알럼 기반의 슬러지를 수열합성 방법으로 흡착제(Alum Sludge Based Adsorbent, ASBA)를 제조하고, 이를 인공 수용액 및 광산배수 내 불소와 비소의 제거에 적용하여 ASBA의 흡착 특성을 평가하였다. ASBA의 광물학적 결정 구조, 구성 성분 및 비표면적을 조사한 결과, ASBA는 표면에 불규칙한 기공과 87.25㎡ g-1의 비표면적을 갖는 흡착에 유리한 구조로 나타났다. ASBA를 구성하는 주요 광물 성분은 석영(SiO2), 몬모릴로나이트((Al,Mg)2Si4O10(OH)2·4H2O), 알바이트(NaAlSi3O8)임을 확인하였다. 다음으로 회분식 흡착실험을 수행하여 pH, 흡착 반응시간, 초기 농도 및 온도 등의 인자가 ASBA를 활용한 불소와 비소 흡착에 미치는 영향을 살펴보았다. 실험 결과, 용액의 pH 환경이 염기 영역으로 갈수록 불소와 비소의 흡착률은 감소하는 경향을 보였으며, 흡착제의 영전하점은 pH 7 부근으로 나타났다. 등온 흡착실험을 통해 확인한 불소와 비소의 최대 흡착량은 각각 7.6mg g-1, 5.6mg g-1이었고, 동적 흡착실험에서 불소와 비소는 반응이 시작한 후 각각 8h, 12h이 경과하면서 흡착농도의 증가율이 감소하는 것으로 나타났다. 한편 흡착평형 실험을 통한 ASBA의 흡착 메커니즘을 알아본 결과. 불소와 비소의 흡착은 Langmuir 등온 흡착모델 및 Freundlich 등온 흡착모델과 높은 상관관계를 가지며 일치하는 경향을 보여주었다. 또한 열역학적 연구에서는 25℃부터 35℃까지의 온도 증가에 따른 불소와 비소의 흡착 양상을 실험하여, 양의 값을 갖는 열역학적 상수 ΔH°와 ΔG°을 도출함으로써 ASBA의 흡착 특성은 흡열반응이자 비자발적인 반응임을 검증하였다. 재생실험 결과, ASBA는 1N NaOH을 이용하여 재생 가능하였으며, 광산배수를 이용한 불소와 비소의 흡착실험에서 각각 77%, 69%로 비교적 높은 제거율을 보여 현장 적용 가능성을 지닌 것을 알 수 있었다. 분석 결과를 종합하여 볼 때, 소규모 유량을 가지며 pH 환경이 산·중성 영역인 광산배수 내 불소와 비소가 흡착되어 제거되는 데 흡착제로서 ASBA가 효과적임을 제안한다. An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.

광산지역 수은오염 토양처리를 위한 기술 사례 분석

이지수(Ji-Su Lee),박미정(Mi-Jung Park),지원현(Won-Hyun Ji),양인재(In-Jae Yang) 대한지질학회 2018 대한지질학회 학술대회 Vol.2018 No.10

산화법과 중화법을 이용한 산성광산배수 내 망간 제거 평가

김범준,지원현,고명수,Kim, Bum-Jun,Ji, Won-Hyun,Ko, Myoung-Soo 대한자원환경지질학회 2020 자원환경지질 Vol.53 No.6

Two oxidizing agents (KMnO4, H2O2), and one neutralizing agent (NaOH) were applied to evaluate Mn removal in mine drainage. A Mn2+ solution and artificial mine drainage were prepared to identify the Fe2+ influence on Mn2+ removal. The initial concentrations of Mn2+ and Fe2+ were 0.1 mM and 1.0 mM, respectively. The injection amount of oxidizing and neutralizing agents were set to ratios of 0.1, 0.67, 1.0, and 2.0 with respect to the Mn2+ mole concentration. KMnO4 exhibited a higher removal efficiency of Mn2+ than did H2O2 and NaOH, where approximately 90% of Mn2+ was removed by KMnO4. A black MnO2 was precipitated that indicated the oxidation of Mn2+ to Mn4+ after an oxidizing agent was added. In addition, MnO2 (pyrolusite) is a stable precipitate under pH-Eh conditions in the solution. However, relatively low removal ratios (6%) of Mn2+ were observed in the artificial mine drainage that included 1.0 mM of Fe2+. The rapid oxidation tendency of Fe2+ as compared to that of Mn2+ was determined to be the main reason for the low removal ratios of Mn2+. The oxidation of Fe2+ showed a decrease of Fe concentration in solution after injection of the oxidizing and neutralizing agents. In addition, Mn7+ of KMnO4 was reduced to Mn2+ by Fe2+ oxidation. Thus, the concentrations of Mn increased in artificial mine drainage. These results revealed that the oxidation method is more effective than the neutralization method for Mn removal in solution. It should also be mentioned that to achieve the Mn removal in mine drainage, Fe2+ removal must be conducted prior to Mn2+ oxidation. 이 연구에서는 KMnO4, H2O2, NaOH와 같은 산화제와 중화제를 사용하여 광산배수 내 Mn 제거효율을 확인하고 광산배수에 다량으로 존재하는 Fe2+의 영향을 파악하고자 하였다. 용액 내 Fe2+의 유무에 따라 Mn의 제거여부를 확인하기 위하여 초기농도 0.1 mM의 Mn2+ 용액을 준비하였다. 이때, 광산배수모사 용액의 Fe2+ 농도는 1 mM이 되도록 조성하였다. 산화제와 중화제의 주입량은 용액 내 Mn2+를 기준으로 각각의 몰비가 0.1, 0.67, 1.0, 2.0이 되도록 주입하였으며, Mn2+의 제거효율은 산화제인 KMnO4를 주입한 경우 최대 90%로 가장 높은 결과를 보였다. 산화제 주입 후 검은색의 MnO2 침전물이 형성되어 Mn2+의 산화제거를 확인하였고, 반응용액의 pH-Eh 조건에서 Mn 산화물인 Pyrolusite (MnO2)가 안정함을 확인하였다. 그러나 용액 내 Fe2+가 존재하는 광산배수 모사용액에서는 용액 내 Mn2+의 제거율이 6%로 매우 낮은 결과를 보였다. 이러한 결과는 Mn2+의 산화보다 Fe2+의 산화가 더욱 빠르게 진행되면서 Mn 산화물 형성을 저해하기 때문으로 판단된다. 산화제 및 중화제 주입 후 용액 내 Fe의 농도가 급격히 감소하는 결과는 Fe2+의 산화에 기인한 것으로 판단된다. 또한, Fe2+의 산화 과정에서 KMnO4의 Mn7+가 Mn2+로 환원되어 광산배수 모사 용액의 용존 Mn의 농도가 오히려 증가하는 결과를 보이기도 하였다. 이상의 결과로 보아, 용액에 존재하는 Mn을 제거하기 위해서는 산화법이 중화법보다 더 효과적이며, 광산배수에 존재하는 다량의 Fe2+를 먼저 제거한 후 용존 Mn의 제거를 진행하는 것이 효과적인 것으로 판단된다.

천연광물을 이용한 황철석 표면 코팅을 통한 폐광산 산성배수 저감 기술 개발

윤현식(Hyun-Shik Yun),지은도(Eun Do Gee),지민규(Min Kyu Ji),이우람(Woo Ram Lee),양중석(Jung-Seok Yang),박영태(Young-Tae Park),권현호(Hyun-ho Kwon),지원현(Won-Hyun Ji),김기준(Kijoon Kim),전병훈(Byong-Hun Jeon),최재영(Jaeyoung Choi) 한국지반환경공학회 2011 한국지반환경공학회논문집 Vol.12 No.2

본 연구에서는 폐광산의 산성광산배수(Acid Mine Drainage, AMD)의 발생을 억제하기 위해 산성광산배수의 주원인인 황철석 표면을 천연광물 및 시멘트를 사용하여 화학적으로 코팅하여 산성광산배수의 문제를 해결하고자 한다. 표면 코팅에 필요한 철이온의 생성을 위해 먼저 산화제 H₂O₂, NaClO 를 이용하여 표준황철석, 영동탄광, 신림광산 시료의 표면을 산화시켰다. 그리고 천연광물(인회석(Apatite), 석회석(Limestone), 망간광(Mangnite), 돌로마이트(Dolomite), 벤토나이트(Bentonite), 시멘트(Cement))를 이용하여 발생된 철이온과 천연광물의 이온을 결합시켜 표면 코팅을 진행하였다. 그 결과 시멘트와 시료의 양을 1:1로 이용하고 4일 이상 진행하였을 때 위의 실험조건에서 가장 효과적으로 황철석의 표면을 코팅하여 SO₄<SUP>2-</SUP>의 발생이 억제되었다. In this study, the effect of surface coating on iron-sulfide mineral for preventing the product acid mine drainage(AMD) was progressed by oxidation process of sulfide minerals abandoned mine Area. Three abandoned mines, Yongdong coal mine, Sil Lim mine, and Il Koang mine were selected as a sulfide mineral resource due to higher contamination rate. Six coating agents, apatite, limestone, mangnite, dolomite, bentonite, and cement were used for preventing the AMD with H₂O₂ and NaClO as a oxidizing agent helping for oxidizing process on sulfide minerals. Experimental results showed that sulfide mineral surface was coated effectively. Cement has a higher ability of preventing AMD when the ratio of cement to mineralis 1:1 and experimental condition is maintaining 4Days.

제강슬래그 복합매질체를 이용한 철 유입에 따른 광산배수내 망간 제거효율 평가

김동관,지원현,김덕민,박현성,오연수,Kim, Dong-Kwan,Ji, Won Hyun,Kim, Duk-Min,Park, Hyun-Sung,Oh, Youn Soo 대한자원환경지질학회 2018 자원환경지질 Vol.51 No.5

폐광산에서 유출되는 광산배수 내 중금속을 처리하기 위해 자연정화법 및 물리화학처리 등 다양한 방법이 사용되고 있다. 특히 광산배수 내 중금속 중 망간은 처리되기 위해 pH 9 이상의 조건이 필요하기 때문에 처리하기 어려운 원소 중 하나이다. 본 연구에서는 광산배수 내 망간의 효율적인 제거방법을 연구하기 위해 다양한 제강슬래그 복합매질체 반응조(제강슬래그(S), 제강슬래그+석회석(S+L), 제강슬래그+망간코팅자갈(S+G))를 사용하여 경쟁원소인 철 유입에 따른 망간의 제거효율을 평가하였다. 철 유입이 없는 358일간의 실험에서는 평균 pH 6.7의 고농도 망간(30~50 mg/L)이 포함된 원수를 사용했으며 제강슬래그 반응조 유출수는 pH 8.9~11.4에서 평균 99.9%의 지속적으로 높은 망간제거효율을 보였다. 철 유입 없이 망간제거실험을 진행한 반응조를 이용하여 망간농도 40~60 mg/L의 원수에 철을 추가로 유입하여 237일간의 실험을 진행하였다. 망간 제거 이후 pH는 6.1~10.0 범위로 증가하였으며 철 유입 전에 비해 낮은 범위를 보였다. S반응조가 pH 7.1~9.9로 가장 높았으며 S+L 반응조, S+G 반응조가 그 뒤를 이었다. 하지만 망간제거효율은 비교적 낮은 pH 범위임에도 불구하고 S+L 반응조가 94~100%로 가장 높았으며 S반응조와 S+G 반응조는 약 68~100%의 범위의 효율을 보였다. S+L반응조가 철 유입에 가장 높은 저항성을 나타냈으며 이는 pH 이외에도 석회석에 의해 공급된 탄산염에 의한 $MnCO_3$의 형성 또는 자가촉매반응이 망간제거에 기여했다고 판단할 수 있다. X선 회절 분석을 통해 S+L 반응조 침전물에서 로도크로사이트(rhodochrosite, $MnCO_3$)를 확인할 수 있었다. 광산배수 내 망간을 처리하는데 가장 효율적인 반응조는 제강슬래그+석회석 반응조로 나타났으며, 본 연구결과는 철의 유입에 따른 비교적 낮은 pH(9 이하) 범위에서도 망간이 효율적으로 제거될 수 있는 공법을 선정하는데 기여 할 수 있다. For the treatment of heavy metals in the mine drainage from the closed mine area, various methods such as passive, active and semi-active treatments are considered. Among contaminated elements in the mine drainage, Mn is one of the difficult elements for the treatment because it needs high pH over 9.0 for its concentration to be reduced. In this study, the efficiency of various slag complex reactors (slag (S), slag+limestone (SL) and slag+Mn coated gravel (SG)) on Mn removal in the presence of Fe, which is a competitive element with Mn, was evaluated to investigate effective methods for the treatment of Mn in mine drainage. As a result of experiments on Mn removal without Fe during 358 days, using influent with $30{\sim}50Mn{\cdot}mg/L$ and pH 6.7 on the average, S reactor showed continuously high Mn removal efficiency with the average of 99.9% with pH 8.9~11.4. Using the same reactors, Mn removal experiments with Fe during 237 days were conducted with the influent with $40{\sim}60Mn{\cdot}mg/L$. The pH range of effluent reached to 6.1~10.0, which is slightly lower than that of effluent without Fe. S reactor showed the highest range of pH with 7.1~9.9, followed by S+L and S+G reactor. However, the efficiency of Mn removal showed S+L>S>S+G with the range of 94~100%, 68~100% and 68~100%, respectively in spite of relatively low pH range. S+L reactor showed the most resistance on Fe input, which means other mechanisms such as $MnCO_3$ formation by the carbonate prouced from the limestone or autocatalysis reaction of Mn contributed to Mn removal rather than pH related mechanisms. The evidence of reactions between carbonates and Mn, rhodochrosite ($MnCO_3$), was found from the X-ray diffraction analysis of precipitates sample from S+L reactor. From this study, the most effective reactors on Mn removal in the presence of Fe was S+L reactor. The results are expected to be applied for the Mn containing mine water treatment in the presence of Fe within the relatively low range of pH.

폐금속광산 중금속오염토양에서 억새를 이용한 식물안정화공법을 위한 토양개량제 선정

정문호,지원현,이진수,양인재,Jung, Mun Ho,Ji, Won Hyun,Lee, Jin Soo,Yang, In Jae 대한자원환경지질학회 2020 자원환경지질 Vol.53 No.5

본 연구는 폐금속광산의 중금속 오염 토양에서 억새를 이용한 식물안정화공법을 적용하기 위해 토양개량제 처리에 따른 토양내 중금속 이동성과 억새내 중금속 축적형태 등을 분석하여 적정 토양개량제를 선발하고자 수행하였다. 이를 위해 중금속 오염토양을 바닥재 1, 2%, 비산재 1, 2%, 폐석회+굴패각 1, 2%, AMDS 10, 20%, 퇴비 3.4% 등으로 처리하고, 비교를 위해 아무 처리를 하지 않은 대조구에 억새를 식재한 후 6개월을 재배하였다. Mehlich-3에 의한 토양내 중금속 함량, 억새 체내 중금속 이동형태 등을 분석한 결과 AMDS 20%가 식물안정화공법에 가장 효과적인 개량제로 선정되었으며, 2순위는 AMDS 10%가 선정되었다. 폐석회+굴패각, 바닥재와 비산재도 식물안정화공법적용 효과가 대조구에 비해 개선된 것으로 나타났다. 개량제 처리에 따라 일부 중금속의 토양내 유동성이 증가하는 결과를 보여, 실제 사업 적용을 위해 사전에 대상지역의 토양오염 특성을 분석하여 현장특성에 적합하게 토양개량제를 선정해야 할 것으로 사료된다. The objectives of this study were to select optimal soil amendments through analysis of heavy metal availability in soil and uptake to Miscanthus sinensis Anderss. for phytostablization in heavy metal contaminated soil of abandoned metal mine. M. sinensis was cultivated for 6 months at contaminated soil with several soil treatments (bottom ash 1 and 2%, fly ash 1 and 2%, waste lime+oyster 1 and 2%, acid mine drainage sludge (AMDS) 10 and 20%, compost 3.4%, and control). The analysis results of heavy metal concentrations in the soil by Mehlich-3 mehthod, growth and heavy metal concentrations of M. sinensis showed that AMDS 20% was more effective than other amendments for phytostablization, and AMDS 10% showed second effectiveness. Waste lime+oyster, bottom ash and fly ash were also improved compared to control. Mobility of some heavy metal was increased by treatments. Therefore, it is necessary of preparatory investigation of soil condition to select soil amendment to apply on-site phytostablization.

석회석과 제강슬래그를 이용하여 안정화한 담수된 논토양의 비소 및 중금속의 거동변화

고일하,김의영,지원현,윤대근,장윤영,Koh, Il-Ha,Kim, Eui-Young,Ji, Won Hyun,Yoon, Dae-Geun,Chang, Yoon-Young 한국지하수토양환경학회 2015 지하수토양환경 Vol.20 No.1

The characteristics of As and heavy metals depend on the oxidation/reduction condition of the soil environment. The most heavy metals are immobilized by the reduction condition whereas As, Fe and Mn become more soluble. Therefore this study estimated the stabilization efficiency of the agricultural paddy soil in the vicinity of the abandoned mine using a flooded column test including analysis of the soil solution, contaminants fractionation and rice grain. Limestone and steelmaking slag were used as amendments for stabilization of the contaminated soil. In an analysis of the soil solution, the mobile characteristics of Fe and Mn, which were used as electron acceptors of the microorganisms, were controlled by increasing the pH by adding alkali amendments. This means that the contaminants combined with Fe and Mn can be stable under flooded reduction condition. However, the concentrations of cationic heavy metals (Cd, Pb, and Zn) were also decreased without amendments because the carbonates produced from microbial respiration increased the pH of the soil solution. In the amended soil, the specific sorbed fraction of As and carbonates fraction of heavy metals were increased when compared to the control soil at the end of the column test. Especially in heavy metals, the increase of carbonates fraction seems to be influenced by alkali amendments rather than microbial respiration. Because of the stabilization effect in the flooded paddy soil, the contents of As and Zn in rice grain from amended soil were lower than that of the control soil. But additional research is needed because of the relatively higher Pb content identified in the rice grain from the amended.