http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조해용,최종웅,최선순 ( Hae Yong Cho,Jong Ung Choi,Seon Soon Choi ) 충북대학교 산업과학기술연구소 1995 산업과학기술연구 논문집 Vol.9 No.1
Abstract_Roman A simulation method based on upper bound method is developed in order to characterize for- ging characters in forging of spur gears. In this paper, a kinematically admissible velocity field was newly proposed and applied to study the effec
금속 벨로우즈 Diaphragm용 CAD 프로그램 개발
조해용,남기정,오병기,김영훈,이제훈,서정,Cho, Hae-Yong,Nam, Gi-Jung,Oh, Byung-Ki,Kim, Young-Hun,Lee, Jae-Hun,Suh, Jung 대한기계학회 2003 大韓機械學會論文集A Vol.27 No.3
A CAD program for metal bellows diaphragm was developed in this study. This program was written in AutoLISP on the AutoCAD system with a personal computer. Basic design concept used in this program is composition of a convolution that is tangent to two lines and 5 circles from given design parameters(initial radius, inner and outer diameter, thickness, pitch, etc.). The effects of altering some design parameters on stress distribution and fatigue life of bellows were estimated using commercial FEM code, NISAII. As a result, the metal bellows diaphragm was successfully designed by the CAD program. It is used to model a bellows geometry in pre-processor of FEM code. The FEM result shows that stress is dependent on straight line length, bellows diameter with same span, and fatigue life is also affected by design parameters.
유리섬유 강화 플라스틱과 알루미늄 합금 접합을 위한 유한요소해석
조해용,김동범,Cho, Hae-Yong,Kim, Dongbum 대한용접접합학회 2015 대한용접·접합학회지 Vol.33 No.2
Self-piercing rivet(SPR) is mechanical joining methods and which can be joining dissimilar materials. Unlike conventional riveting, SPR also needs no pre-drilled holes. During plastically deformation, SPR pierces upper sheet and joins it to under sheet. SPR has been mainly applied to the joining the automobile body and some materials, such as glass fiber reinforced polymer and aluminum alloy, which represent the sheet-formed materials for lightweight automobile. Glass fiber reinforced plastic(GFRP) has been considered as a partial application of the automobile body which is lighter than steels and stronger than aluminium alloys. It is needed SPR to join Al alloy sheets and GFRP ones. In this paper, in order to design the rivet and anvil, which are suitable for GFRP, the joinability was examined through simulations of SPR joining between GFRP and Al alloy sheets. For this study, AutoCAD was used for the modeling and the simulated using commercial FEM code DEFORM-2D. The simulated results for SPR process joining between GFRP and Al alloys were confirmed by the same conditions as experimental trials.
조해용,이현철,박인기 ( Hae Yong Cho,Hyeon Chul Lee,In Gee Park ) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.1
Abstract_Roman As a new metal forming process, a study on the semi-solid forming techniques which is able to form the near-net shape from raw materials has been recently proceeded. But a few of studies on the semi-solid forging techniques have been perfo
조해용,박인기,이종신 ( Hae Yong Cho,In Gi Park,Jong Shin Lee ) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.1
Abstract_Roman This paper describes forging of circular toothed gears as a series of development of simulator for non-axisymmetric parts. Kinematically admissible velocity fields for forging of circular gear have been proposed. The half pitch of gear has
조해용,최종웅,이상준 ( Hae Yong Cho,Jong Ung Choi,Sang Jun Lee ) 충북대학교 산업과학기술연구소 1995 산업과학기술연구 논문집 Vol.9 No.2
Abstract_Roman The upper bound method utilizing neutral surface is applied newly to trapezoidal spline and serration with purpose to verify that the using of neutral surface is useful for prediction of load and inner flow of material of gear-like compone
조해용,최종웅,이상준 ( Hae Yong Cho,Jong Ung Choi,Sang Jun Lee ) 충북대학교 산업과학기술연구소 1995 산업과학기술연구 논문집 Vol.9 No.2
Abstract_Roman A Kinematically admissible velocity field has been proposed and is applied to forging of machine part such as square spline with hollow and solid billet in this study. The half pitch of square spline has been divided into five deformation
조해용,이종신,박인기 ( Hae Yong Cho,Jong Shin Lee,In Gi Park ) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.1
Abstract_Roman This paper described integrated forging analysis program of gear-like components such as involute spur gear, trapezoidal spline, square spline, serration and circular gear by upper bound method. Each components has proper deformation regio
조해용(Hae-Yong Cho),오병기(Byung-Ki Oh),채동헌(Dong-Hun Chae) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
In this paper, a nonlinear finite-element method was employed to analyze mechanical behaviors of<br/> the balloon-expandable stent. Beyond safety considerations, this type of analysis provides mechanical<br/> properties that are often difficult to obtain by experiments. Mechanical properties of the stent expansion<br/> pressure, radial recoil, longitudinal recoil and foreshortening were studied using commercial FEM code,<br/> ANSYS. As a result, the pressure necessary to expand the stent up to a diameter of 3㎜ was 7.6atm,<br/> longitudinal recoil, radial recoil and foreshortening were -0.388%, 2.87% and 4.07% respectively. In<br/> conclusion, a finite element model used in this study could help in designing new stents or analyzing<br/> actual stents.