http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Esthetic mounting (OP1)을 사용하여 교합면 재구성을 시행한 증례
조상호,Cho, Sang-Ho 대한심미치과학회 2014 Journal of the Korean Academy of Esthetic Dentistr Vol.23 No.1
붕괴된 교합평면을 보철적으로 재구성하는 과정에 있어 face-bow와 교합기는 필수적으로 필요한 기구로 사용되어왔다. 일반적으로 Ear rod를 사용하는 face bow는 상악 정중선의 오차와 교합평면의 canting이 발생할 가능성이 있는데 이런 문제점을 해결하기위해 환자의 안면 정중선을 기준으로 하는 face bow가 개발되어왔다. Ear-bow를 이용한 mounting에서 종종 발생하는 오류를 보완하는 방법으로 환자 안면의 중심과 교합기의 중심을 일치시키려는 개념의 mounting technique이 시도되고 있으며 이를 esthetic mounting이라 한다. 이들 중 하나인OP finder 1(OP1)을 사용한 증례를 보고하고자 한다. A face-bow and an articulator have been used as crucial devices in a prosthodontic reconstruction of a collapsed occlusal plane. In order to avoid inaccuracy of median line in maxilla and the canted occlusal plane both of which may result from using a facebow with ear rods, a facebow that locate a patient's facial median line as reference line has been under development. A mounting technique that tries to bring a center of patient's face into line with the center of the articulator, called esthetic mounting, is currently employed to overcome the imprecision resulted from mounting with ear-bow transfer. We would like to study a case that used OP finder 1, one of the esthetic mounting techniques.
조상호,최형권,유정열,Cho, Sang-Ho,Choi, Hyoung-Gwon,Yoo, Jung-Yul 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.9
Flow characteristics of the fluid laden with many particles in the two-dimensional channel are investigated using the Navier-Stokes equations coupled with the equation of motion of particles by direct numerical simulation. A four-step fractional step method with Crank-Nicolson scheme and ALE technique is used for P2P1 mixed finite element method. The motion and distribution of particles in the fluid is virtually described as a result of direct numerical simulation and the increase of viscosity is compared with theoretical equations. The effect of channel height on the relative viscosity and the tubular pinch effect are discussed.
상악동저 거상술과 임플란트 식립 후 상악동저 변화에 대한 연구
조상호,김옥수,Cho, Sang-Ho,Kim, Ok-Su 대한치주과학회 2006 Journal of Periodontal & Implant Science Vol.36 No.2
Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p<O,01). Significant difference was not observed between staged approach and simultaneous approach in graft height change according to time in lateral approach, However, staged approach had more height loss to simultaneous approach in all observed time. In lateral approach, there was significant difference in BL/IL change according to the type of graft material (p<0.05). Autogenous bone had maximum height loss and $MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p<O.01) in both approach. From above mentioned results, we concluded that progressive sinus graft height reduction occurs in both maxillary sinus floor elevation approaches and then stability of sinus graft height is achieved, In case of autogenous bone or $ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.
조상호(Sang-Ho Cho),김진호(Jin-Ho Kim),장병준(Byung-Jun Jang),노정욱(Chung-Wook Roh),홍성수(Sung-Soo Hong),한상규(Sang-Kyoo Han) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
본 논문에서는 가시광 통신을 위한 고효율·대용량 LED 드라이버를 제안한다. 기존 가시광 통신을 위한 LED 드라이버는 LED의 선형 구동방식으로 인한 전력 손실 및 발열이 매우 심각하여 대용량의 조명용 LED에 적용하기에는 현실적인 어려움이 뒤따랐다. 하지만 제안 회로는 LED의 스위칭 방식 구동을 통해 전력 변환 효율 및 발열이 크게 개선되어 대용량의 조명용 LED에 적용할 수 있을 뿐 아니라 효율 저하 없이 최대 10Mbps의 높은 데이터 전송 성능을 가지는 부가적인 무선통신 시스템을 구현할 수 있다. 최종적으로, 제안회로의 우수성을 검증하기 위하여 무선통신 오디오 시스템을 구현하여 고찰된 실험 결과를 제시한다.
LCD Backlight를 위한 CCFL 구동용 인버터 트랜스포머의 설계와 응용
조상호(Sang-Ho Cho),한상규(Sang-Kyoo Han),노정욱(Chung-Wook Roh),홍성수(Sung-Soo Hong),사공석진(Sug-Chin Sakong),권기현(Gi-Hyun Kwon),이효범(Hyo-Bum Lee) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
LCD TV의 대형화에 따라 하나의 백라이트용 냉음극 방전램프 (Cold Cathode Fluorescent Lamp ; CCFL)를 이용한 백라이트는 휘도의 한계가 있어 대형 디스플레이에서는 여러 개의 램프를 사용하여 필요한 휘도를 만들고 있다. 본 논문에서는 냉음극 방전램프 16개를 사용하는 42인치 LCD TV용 대형 백라이트 구동을 위한 인버터의 트랜스포머를 각기 다른 램프의 특성에 대해 동일한 관 전류 출력을 갖도록 설계하였다.
조상호(Sang-Ho Cho),조슬기(Seul-Ki Jo),천대성(Dae-Sung Cheon),신중호(Joong-Ho Synn),양형식(Hyung-Sik Yang),김승곤(Seung-Kon Kim) 한국암반공학회 2008 터널과지하공간 Vol.18 No.6
암반 굴착기술의 고속화 및 정밀한 암반손상평가를 위해서는 암석의 동적파괴 메커니즘에 관한 연구가 중요하다. 본 연구에서는 충격 파형 제어 Split Hopkinson Pressure Bar (SHPB) 시스템을 이용하여 모의 암석시료에 단계별 충격하중을 가하여 취성재료의 동적파괴 특성 및 동적손상메커니즘을 분석하였다. 실험시료의 손상도 평가를 위하여 충격실험 전후에 모든 시료에 대하여 P파 및 S파 속도를 측정하였으며, 탄성파 속도 감쇠정도에 따른 손상도를 평가하였다. 모의 연암 시료와 경암 시료의 탄성파 속도 감쇠비는 충격하중이 증가함에 따라 비슷한 수준으로 증가하는 경향을 보였으나, 최종 변형률의 경우 모의 연암 시료에서 현저히 높은 값을 나타내었다. Dynamic fracture mechanism of rock is important to improve rapid excavation method and develop precise damage assesment of rock mass in the vicinity of an excavation. In order to investigate dynamic fracture characteristics and dynamic damage mechanism of brittle materials, this study employed pulse shape-controlled Split Hopkinson Pressure Bar (SHPB) system. The P- and S-wave velocities of the tested samples were measured before and after tests to examine damage of the samples. The decay ratios of the Ultrasonic wave velocities increased with impact velocities and the samples which have lower strength showed higher permanent strain significantly.