http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
논문 : 노외기계시스템공학 ; 벨트 파지식 1조 콩 예취기 개발
전현종 ( H. J. Jun ),강태경 ( T. G. Kang ),이충근 ( C. K. Lee ),최용 ( Y. Choi ),이채식 ( C. S. Lee ),홍종태 ( J. T. Hong ) 한국농업기계학회 2010 바이오시스템공학 Vol.35 No.6
This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a 35° of tilted angle and 90° of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.
전현종 ( H. J. Jun ),김진구 ( J. G. Kim ),유승화 ( S. H. Yu ),김영근 ( Y. K. Kim ),강태경 ( T. G. Kang ),최일수 ( I. S. Choi ),이상희 ( S. H. Lee ),최용 ( Y. Choi ),김형곤 ( H. G. Kim ) 한국농업기계학회 2017 한국농업기계학회 학술발표논문집 Vol.22 No.2
들깨는 우리 식생활에서 들기름과 들깨가루 등으로 애용되고 있으며 치매예방, 면역력 강화 등 건강증진 기능이 알려지면서 국내 수요와 재배면적이 꾸준히 증가하고 있지만, 탈곡과정 기계화의 연구는 아직 미진한 실정이다. 본 연구에서는 들깨 탈곡작업 기계화를 위해 기존 콩 탈곡기의 성능개선 및 범용화를 통한 들깨 기계화 기술향상을 하고자 수행하였다. 실험 선정 탈곡기는 자동식 줄기 배출방식(A 형식)과 수동식 줄기 배출방식(B형식) 2가지 형식이며, 시험대상 작물인 예취된 콩과 들깨의 물성은 다음과 같다(콩 초장 1.03 m, 최하분지고 20 cm, 들깨 초장 1.57 m, 최하분지고 10 cm). 기존 콩 탈곡구조에 들깨를 적용하기 위해서 탈곡망 및 선별망의 크기를 Ø4 mm로 축소하였고, 길이와 폭을 좀 더 크게 변경하였다. 시험방법은 예취 후 20일정도 자연건조 한 들깨1 kg을 A, B 형식의 탈곡기에 넣고 곡립손실률 및 수확물의 곡립조성비(%)를 조사하였다. 시험결과 A, B형식의 탈곡기 모두 송풍 팬에 의해서 손실이 크게 발생하였다. 이는 송풍 팬을 작물에 따라 제어할 수 있는 가변형장치가 필요할 것으로 판단하였다. 송풍 팬을 구동하지 않을 경우 곡립손실률은 B형식의 탈곡기(4.1%)가 A형식의 탈곡기(2.1%) 보다 높게 나타났지만 탈곡율이 좋고 배출 속도가 빠르게 나타났다. 수확물 곡립조성비(%) 시험결과 B형식의 탈곡기는 곡립과 잡물의 비가 약 4:1, A형식은 약 1:1의 비율로 B형식 탈곡기의 곡립조성이 양호하였지만 잡물비율이 모두 높아 개선이 필요하였다. 결과적으로 들깨를 콩 탈곡기에 적용하기 위해서는 적정 송풍 팬의 속도 규명과 손실률 및 잡물비율을 낮출 수 있는 탈곡기의 장치개선이 필요할 것으로 판단된다.