http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전범수(Bum-Su Jun),윤영민(Young-Min Yun),전진용(Jin-Yong Jeon),김지원(Ji-Won Kim),강도현(Do-Hyun Kang) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
본 논문은 횡자속 선형전동기의 상용화를 위해 필요한 전동기의 특성과 성능을 파악하기 위한 연구이다. 횡자속 선형전동기의 구조 및 사양을 기초로 시작품을 제작하였다. 횡자속 선형전동기를 특성을 파악하여 제어 시스템을 구성하였고, 구성된 시스템을 운전하여 성능을 확인 할 수가 있었다. 시스템의 성능은 결과를 통해 검증하였다. 횡자속 선형전동기의 안정성을 확보한다면 산업응용분야에 적용될 것이다.
전범수(Bum-su Jun),이희준(Hee-jun Lee),이승교(Seung-gyo Lee),류동균(Dong-kyun Ryu),이택기(Taeck-kie Lee),원충연(Chung-yuen Won) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.11
Filament power supply (FPS) for neutral beam injection (NBI) consists of an insulation type is a device that heats the interior of Tokamak. The input/output specifications of FPS are 3-phase AC 200[Vpeak] and DC16V/300A respectively. A conventional FPS is composed of a 3-phase diode rectifier with DC-link, a H-bridge DC/DC converter, a high frequency transformer, a secondary rectifier and a LC-filter. In this paper, to improve the efficiency of PSFB DC/DC converter it is substituted IGBT devices instead of diode rectifier in secondary side. The proposed method is verified by computer simulation and experiment result.
NBI용 필라멘트 전원공급 장치를 위한 풀-브리지 DC/DC 컨버터
전범수(Bum-Su Jun),이세형(Se-Hyung Lee),이희준(Hee-Jun Lee),신수철(Soo-Cheol Sin),이승교(Seung-Kyo Lee),원충연(Chung-Yuen Won) 한국조명·전기설비학회 2011 조명·전기설비학회논문지 Vol.25 No.7
FPS(Filament Power Supply), one of the KSTAR NBI(Neutral Beam Injections) is implemented by full-bridge DC/DC converter. NBI heating device for KSTAR(1.5㎿) is developed for heating an ion source of plasma in KSTAR tokmak. The full-bridge DC/DC converter is applied to FPS for isolation with input and output. And FPS is operated with PWM control method which is the most usual method. In this paper, NBI FPS of 4.8kW is simulated by using the PSIM 6.0. And the full-bridge DC/DC converter using IGBTs is fabricated to demonstrate it. The processor DSP 28335 is implemented for digital control.
Neutral Beam Injection용 Arc Power Supply 설계
이희준(Hee Jun Lee),전범수(Bum Su Jun),류동균(Dong Kyun Ryu),이택기(Taeck Kie Lee),박선순(Seon Soon Park),원충연(Chung Yuen Won) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.11
KSTAR NBI 시스템은 플라즈마의 온도를 높여 주기 위해 고 에너지의 중성 입자빔을 만들어서 토카막 플라즈마에 투입시키기 위한 중성 입사 장치이다. NBI 아크 전원 공급장치는 토카막 내부에 플라즈마를 만들어 주는 역할을 하는데 본 논문에서는 3상 다이오드 정류기, LC필터, 2.4㎾급 6 병렬 벅 컨버터로 설계하여 시뮬레이션과 실험을 통하여 확인 하였다.
보조 공진 회로를 이용한 소프트 스위칭 ZVT 부스트 컨버터
이희준(Hee Jun Lee),김준구(Jun Gu kim),전범수(Bum Su Jun),정용채(Yong Chae Jung),원충연(Chung Yuen Won) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
In this paper, soft switching boost converter with ZVT(Zero Voltage Transition) method was proposed. Each switch of the proposed ZVT converter is operated under soft switching condition through using auxiliary resonant circuit. Also, the ZVT converter is verified through operation modes analysis and simulation.
영구자석형 동기전동기의 저속도 영역에서 제어 성능 개선
원충연,유재성,전범수,황선모,김연층,이상석,Won, Chung-Yuen,Yu, Jae-Sung,Jun, Bum-Su,Hwang, Sun-Mo,Kim, Yuen-Chung,Lee, Song-Seok 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.1
In this paper, improvement method of control performance by a full-order observer using reduced-order state equation is proposed in the low speed range. Full-order observer using reduced-order state equation is the motor speed and the disturbance torque observer. The proposed algorithm is very stable in the low speed range about 1.9[rpm]. The disturbance torque in the motor drive system degrades speed control performance in the low speed range. The proposed algorithm estimated both motor speed and disturbance torque. The estimated disturbance torque is used as a feedforward value in output of the speed controller, As a result, it improves the response of load torque in the low speed range(1.9rpm). 본 논문은 축소차원 상태방정식을 사용한 전차원 관측기를 이용하여 저속도 영역에서의 운전 성능 개선방법을 제안하였다. 축소차원 상태방정식을 사용한 전차원 관측기는 간단한 모터속도 및 외란토크 관측기이다. 제안한 알고리즘은 약 1.9[rpm]의 저속도에서 매우 안정적인 결과를 보였다. 모터구동 시스템에서 외란토크는 저속도 영역에서 속도제어 성능을 저하시킨다. 제안한 알고리즘은 모터속도와 외란토크를 모두 추정한다. 추정된 외란 토크는 속도제어기의 출력에 전향보상 값으로 사용되며, 그 결과 저속도 영역(1.9rpm)에서 부하토크 응답특성이 향상된 것을 확인하였다.
원충연,유재성,김진흥,전범수,황선모,Won, Chung-Yuen,Yu, Jae-Sung,Kim, Jin-Hong,Jun, Bum-Su,Hwang, Sun-Mo 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.5
본 논문은 엘리베이터용 표면부착형 영구자석형 동기전동기의 속도제어를 기술하였다. 엘리베이터 전동기는 컴팩트하고 슬립형이 되어야 한다. 제안된 기법은 속도 및 토크제어를 위해 벡터제어 알고리즘을 사용하였으며, 속도제어기와 전류제어기에 windup 현상을 방지하기 위해 Anti-windup 기법을 적용하였다. 이 시스템은 컴팩트하고 저렴하게 설계하기 위하여 고속 32비트 DSP(TMS320C31-50), 고직접 논리소자 FPGA(EPF10K10TI144-3)로 수행되었다. 제안된 기법은 기계실 없는 엘리베이터용 3상 13.3[kW] 표면부착형 동기전동기로 시뮬레이션 및 실험을 통하여 결과를 확인하였다. This paper describes the speed control of the surface-mounted permanent-magent synchronous motors (SMPMSNM) for elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control and Anti-windup technique is adopted to prevent a windup phenomenon. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA(EPF10K10TI144-3) to design compactly and inexpensively. The proposed scheme is verified by the results through digital simulation and experiments for a three-phase 13.3[kW] SMPMSM as a MRL(MachineRoomLess) elevator motor in the laboratory.