http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
발파에서 가이드공의 균열제어 유효성에 관한 수치 해석적 연구
이희광(Hee-Gwang Lee),김학만(Hak-Man Kim),김승곤(Seung-Kon Kim),조상호(Sang-Ho Cho) 한국암반공학회 2010 터널과지하공간 Vol.20 No.4
무장약 가이드공의 균열제어 효과를 파악하기 위하여 무장약 가이드공을 적용한 콘크리트 블록 발파실험결과를 바탕으로 동적파괴과정해석을 수행하였다. 장약공과 노치형 및 원형 무장약 가이드공을 가진 해석모델을 작성하고 공간격, 암반강도, 폭발하중속도에 따른 최종균열을 분석하였다. 모든 해석모델에서 무장약 가이드공이 설치되어 있는 방향으로 탁월균열이 형성되었으며, 이것은 무장약 가이드공이 균열제어에 효과가 있음을 입증하며 실험결과와도 일치한다. The model experiments, which employ a charge hole and guide hole, are simulated to examine the effect of the guide hole on the crack propagation control in blasting. Crack patterns resulted from the analysis models, which consider the distance between the charge hole and guide hole, were compared. From the simulation analysis for the model experiments, it was revealed that all the guide holes used in this study were effective for controlling the crack propagation in blasting.
발파에서 가이드공의 균열제어 유효성에 관한 실험적 연구
이희광(Hee-Gwang Lee),김승곤(Seung-Kon Kim),조상호(Sang-Ho Cho) 한국암반공학회 2010 터널과지하공간 Vol.20 No.2
화약류를 이용한 발파에서 가이드공의 균열제어효과를 검토하기 위하여 모르타르 공시체를 이용한 발파실험을 수행하였다. 모르타르 블록의 중앙에 장약공을 설치하고 주변에 방사상으로 4종류의 가이드공을 각각 두 개씩 설치하였다. 4종류의 가이드공은 원형, 노치형, 다이아몬드형, 다이아몬드 홀더형이며, 장약공과 가이드공의 간격은 각각 110 ㎜, 165 ㎜, 220 ㎜으로 하여 3가지 형태의 모르타르 공시체를 제작하였다. 발파 실험 후 공시체에 대한 분석결과, 적용된 가이드공 모두 균열제어효과를 보였으며 같은 폭발압력에서는 노치 가이드공이 보다 높은 균열제어효과를 나타내었다. Model blast experiments of mortar blocks were performed to investigate the effect of the guide hole on crack growth. The mortar block specimens have a blast charge hole and 8 guide holes. Two of circular guide hole, notched guide hole, diamond shaped guide hole and diamond shaped guide holder are installed around 110 ㎜, 165 ㎜ and 220 ㎜ apart from the charge hole for each specimen. From the blast experiments, it was revealed that all the guide hole used in this study were effective for controlling the crack growth at the fracture control.
전도공법에 의한 축소모형 철근콘크리트 구조물의 붕괴거동
박훈(Hoon Park),이희광(Hee-Gwang Lee),유지완(Ji-Wan Yoo),송정언(Jeung-Un Song),김승곤(Seung-Kon Kim) 한국암반공학회 2007 터널과지하공간 Vol.17 No.5
발파해체 되는 철근콘크리트 구조물은 교대하중에 의해 정형구조에서 비정형구조로 변환되며 붕괴거동은 비선형적인 대변위 거동을 한다. 철근콘크리트 구조물의 붕괴거동에 대한 많은 수치 모델링 연구가 수행되었지만, 비선형적인 대변위 거동을 해석하기에는 아직 부족한 수준이다. 본 연구에서는 실제 철근콘크리트 구조물을 1/5로 축소한 축소모형 구조물을 제작하였다. 전도공법으로 1층, 3층, 5층 축소모형 구조물을 발파하여 상부자중에 의한 구조물의 붕괴 가능성을 고찰하였으며, 구조물의 붕괴거동을 X방향(수평방향)의 변위, Y방향(수직방향)의 변위, 상대 변위각으로 분석하였다. 실험결과 자중에 의한 구조물의 붕괴를 유도하기 위한 상부 자중의 크기를 확인할 수 있었다. 또한 구조물의 붕괴에 따른 X방향의 변위와 Z방향의 변위는 발파 후 67ms, 300ms부터 서서히 증가하였고, 교대하중에 의해 3층 구조물의 초기 붕괴 속도가 5층 구조물보다 크게 발생하는 것을 확인하였다. The regular RC structures have been transformed into irregular RC structures by alternate load of RC structures during explosive demolition. Numerical simulation programs have contributed to a better understanding of large displacement collapse behavior during explosive demolition, but there remain a number of problems which need to be solved. In this study, the 1/5 scaled 1, 3 and 5 stories RC structures were designed and fabricated. To consider the collapse possibility of upper dead load, fabricated RC structures were demolished by means of felling method. To observe the collapse behavior of the RC structures during felling, displacement of X-direction (or horizontal), displacement of Z-direction (or vertical) and relative displacement angle from respective RC structures were analyzed. Finally explosive demolition on the scaled RC structures using felling method are carried out, collapse behavior by felling method is affected by upper dead load of scaled RC structures. Displacement of X and Z direction increases gradually to respective 67ms and 300ms after blasting. It is confirmed that initial collapse velocity due to alternate load has a higher 3 stories RC structures than 5 stories.