http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한계상태이론을 이용한 시멘트 고화처리 점토에 대한 구성 모델
이송,이규환,이장덕,정대석,Lee, Song,Lee, Kyu-Hwan,Yi, Chang-Tok,Jung, Dae-Suk 한국지반공학회 2001 한국지반공학회논문집 Vol.17 No.1
연약지반 개량을 위한 시멘트의 사용은 깊은 심도의 점토 지반을 개량하는데 일반적으로 사용되는 기술이 되었다. 시멘트는 지반의 강도를 증가시키고 압축성을 감소시키는 역할을 한다. 시멘트-흙 혼합물의 강도 증가에는 여러 가지 요소가 있는데 이중 대표적인 것은 시멘트량, 흙의 종류, 함수비, 양생시간 등을 들 수 있다. 시멘트 첨가량이 적은 경우, 전단 강도증가는 기본적으로 시멘테이션 효과로 인한 점착력의 증가에 의한 입자들간의 마찰력으로부터 발생한다. 이러한 거동은 과압밀된 흙의 거동과 유사함을 볼 수 있다. 시멘트량이 많은 경우, 강도 증가의 주원인은 입자간의 물리적 결합에 기인하는데 이는 연약한 암석과 비슷한 거동을 한다. 시멘트 고화처리 흙의 응력-변형 거동을 분석하기 위해 한계상태 이론을 적용하였다. 그리고, 토립자간의 시멘테이션 효과를 반영하기 위해 새로운 한계상태 파라메타를 도입하였으며 시멘트 고화처리 점토의 거동을 분석하기 위한 새로운 한계상태 모델을 제시하였다.
이송,이규환,이장덕,Lee, Song,Lee, Kyu-Hwan,Yi, Chang-Tok 한국지반공학회 1999 한국지반공학회논문집 Vol.15 No.2
본 논문에서는 재 성형된 해성점토로 이루어진 모형지반에 타입된 모형말뚝에 작용하는 부마찰력에 대한 모형실험 및 수치해석을 하였다. 모형실험은 세 부분으로 분리된 모형말뚝을 이용하여 말뚝 각 단에 작용하는 부마찰력을 분리하여 측정하였으며, 시험 전과정 동안의 침하량과 간극수압을 측정하여 부마찰력 거동특성 파악에 활용하였다. 또한, 모형말뚝의 거동분석을 위해 유한요소해석을 하였다. 모형 말뚝에 작용하는 부마찰력 거동을 파악하기 위해 모형실험과 연약지반에 적용성이 큰 것으로 평가되고 있는 CRISP를 이용하여 비교.분석하였다. This paper investigated the negative skin friction acting on the model piles driven in the cylindrical chamber filled with remolded marine clay. In model tests, three load cells were installed on the model piles consisting of three parts to measure the negative skin friction forces independently. Pore pressures and ground movements were monitored throughout the period of investigation. Finite element analysis was used to simulate the behavior of a model pile. This paper describes the comparison of the behavior of negative skin friction on the single model pile with a numerical analysis by CRISP.
국내 잔류토층에서 CPT와 SPT와의 상관관계에 대한 연구
구자갑 ( Koo Ja-kap ),이장덕 ( Yi Chang-tok ) 한국구조물진단유지관리공학회 2003 한국구조물진단유지관리공학회 논문집 Vol.7 No.3
국내에서는 많은 기초설계가 표준관입시험 (SPT)의 N값을 적용하고 있으며, 콘관입시험 (CPT)의 효용성 증가로 인해 SPT와 CPT의 상관관계를 설계에 이용하고 있는 실정이다. SPT와 CPT의 상관관계에 대한 연구는 지난 30년 동안 해외에서 많이 진행되어 왔으나 잔류토층에 대한 연구는 미흡한 실정이다. 이는 지역마다 잔류토층의 특성이 달라 그 상관관계의 분산이 크기 때문이다. 따라서 국내 잔류토층의 특성에 맞는 SPT와 CPT의 상관관계 정립을 위하여 SM으로 분류된 잔류토층에 대한 분석을 실시하였으며, 그 결과 qt/N<sub>60</sub>=0.3으로 분석되었다. Many foundation jobs have been designed and constructed in Korea with the sole information obtained from the SPT. The use of the CPT to estimate equivalent SPT values is becoming a common application for foundation design. The relationship between the CPT and the SPT has been determined in a number of studies over the past three decades. However a few papers have been published on the relationship between the CPT and the SPT in residual soil. Due to the large variation in published correlations between qt and N in residual soil, local correlations should be developed wherever possible. CPT tests have been carried out in the residual soil classified by SM in accordance with USCM and compared with SPT. Value of qt/N = 0.3 have been suggested for residual soil in Korea.
Sabkha층 탄산질 모래의 삼축압축시 입자파쇄로 인한 응력경로 특성
김석주 ( Seok Ju Kim ),이장덕 ( Chang Tok Yi ),장재호 ( Jae Ho Jang ),한희수 ( Heui Soo Han ) 대한지질공학회 2014 지질공학 Vol.24 No.1
아랍에미리트연합(UAE)의 Ruwais지역 Sabkha층 탄산질 모래는 석영질 모래와는 구성성분이 다르며 낮은 외부하중에서 쉽게 입자파쇄가 발생한다. 이러한 지반은 상부하중으로 인한 입자파쇄를 유발하여 추가 침하가 발생하며 전단강도가 감소하게 된다. 이러한 문제에 대한 구체적인 연구를 위하여 표준압밀시험과 삼축압축시험을 수행하여 탄산질 입자의 파쇄에 대한 다양한 공학적 특성을 분석하고자 하였다. 그 결과 탄산질 모래는 선행입자파쇄 정도에 따라서 파괴시 전단응력의 크기가 다르게 나타났다. 즉, 응력경로를 나타내는 p-q 다이어그램에서 p`` > p인 경우가 발생하였으며, 이때 내부공극이 외부로 노출되어 음(-)의 간극 수압이 발생되었다. 또한, 입자파쇄로 인하여 증가하던 q값이 감소하였다. 삼축압축 시험결과 탄산질 모래의 선행입자파쇄 정도에 따라서 압축시 발생되는 간극수압의 형태가 다르게 나타나 Sabkha층 탄산질 모래의 입자파쇄시 나타나는 다양한 거동특성을 알 수 있다. The composition of carbonate sands from a sabkha at Ruwais in the UAE differs from that of silica sand, and these sands are crushed easily under low compression pressures. Accordingly, particle crushing of carbonate sand occurs under high pressure, which results in additional settlement and reduces the shear strength. In this study, consolidation and triaxial tests were conducted to analyze the characteristics of carbonate sands following particle crushing. The unusual shear strength graphs of the carbonate sands result from the degree of particle pre-crushing. For the range at p` > p in the p (p`)-q diagram, negative (.) excess porewater pressures occur if the axial pressure causes particle crushing that induces exposure of the inner voids. In addition, the q value decreased after particle crushing. In conclusion, the unusual characteristics of the carbonate sands were induced by particle crushing. The triaxial tests revealed that the degree of particle pre-crushing influenced the excess porewater pressure.