http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이진욱,이성민,김형태,최의석,이용석,Lee, Jin-Uk,Lee, Sung-Min,Kim, Hyung-Tae,Choi, Eui-Seok,Lee, Yong-Seok 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.12
고령토질 벽돌에 대한 fly ash의 첨가가 소결온도에 미치는 영향과 그에 따른 물성의 변화를 관찰하였다. Fly ash로는 탄소 8∼9%의 무연탄 연로 재를 사용하였고 고령토 등의 국산 천연원료를 이용하여 실험을 하였다. Fly ash와 고령토 등의 4종의 원료를 5가지의 혼합비로 조합하여 혼합, 성형하고 각각 1050${\circ}C$, 1100${\circ}C$, 1150${\circ}C$, 1200${\circ}C$의 온도로 소성하였다. 소성온도가 증가함에 따라 모든 시편에서 흡수율은 낮아지고 압축 강도는 증가하였다. 소성온도가 1100${\circ}C$ 이하인 경우 fly ash의 함량이 증가함에 따라 흡수율은 증가하고 강도가 감소하였다. 이에 비하여 소성온도가 1150${\circ}C$ 이상인 경우 흡수율은 소성온도가 낮은 경우와 유사한 경향을 보였으나 강도는 증가하였다. The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.
상황(桑黃)버섯의 면역증진(免疫增進)에 관(關)한 연구(硏究)
임의수,최병렬,유화승,이용연,서상훈,조정효,이연월,손창규,조종관,이용구,송기철,Lim, Eui-Su,Choi, Byung-Ryul,Yoo, Hwa-Seung,Lee, Yong-Yeon,Seo, Sang-Hoon,Cho, Jung-Hyo,Lee, Yeon-Weol,Son, Chang-Kyu,Cho, Chong-Kwan,Lee, Yong-Gu,Song, Kee 대한암한의학회 2002 大韓癌韓醫學會誌 Vol.8 No.1
Objectives This experimental study was carried out to evaluate the effects of Phellinus Linteus on immune activation. Methods In order to investigate the effect of Phellinus Linteus, the following was performed: The fraction of $CD4^+$, $CD8^+$, $CD19^+$ in splenic cell, gene expression of IL-12 (p35), IL-12 (p40) , $IFN-{\gamma}$, and splenic cell proliferation by PL-E. Results PL-E helped $CD4^+$, $CD8^+$, $CD19^+$ expression more effectively compared with control group. PL-E helped IL-12 (p35), IL-12 (p40), $IFN-{\gamma}$ gene expression in splenic cells more effectively compared with control group. PL-E proliferated splenic cells more effectively compared with control group. Conclusions: It is suggested that PL-E is able to activate immune response system.
차세대 마이크로프로세서를 위한 어셈블러의 객체화에 대한 연구
정태의(Jung Tae Eui),이지영(Lee Jee Young),이광엽(Lee Kwang Youb),이용석(Lee Yong Surk) 한국정보처리학회 1999 정보처리학회논문지 Vol.6 No.3
The object-oriented methods are being rapidlly accepted as the solution for the softwarecrisis. Object-oriented systems are composed of the integration of independent object modules; their merits are such that it is possible to reuse objects already developed, and that, when changes are required, modifications are restricted to some independent objects such that their affects to other objects are so little. In this paper, we deal with the macro assembler for next-generation microprocessors which has the merits of object methods. Whenever a microprocessor is newly developed,new assembler should be developed or the existing assembler be modified. In the former, it leads to the loss of time and money by the repeated developments, and, in the latter, it causes the problem of inefficient productivity since other modules are to be analyzed for the affections followed by modifications of one module, especially in the existing assemblers. To resolve these problems, the object-oriented macro assembler suggested in this paper consists of independent objects separable such that it shows reusability and reduces the inefficient productivity by minimizing the affects to other objects. Moreover, the object-oriented macro assembler integrates a macro pre-processor into an assembler, and uses automata for analyzing input streams to reduce the compile time.
실리콘 광학벤치를 사용한 수동정렬형 광송수신기용 광부모듈의 제작
이상환,주관종,황남,문종태,송민규,편광의,이용현,Lee, Sang-Hwan,Joo, Gwan-Chong,Hwang, nam,moon, Jong-Tae,Song, Min-Kyu,Pyun, Kwang-Eui,Lee, Yong-Hyun 한국광학회 1997 한국광학회지 Vol.8 No.6
광모듈에서는 반도체소자와 광섬유간의 복잡한 정렬에 필요한 패키지비용이 제조단가의 많은 비중을 차지하고 있어 수동정렬방식으로 광정렬절차를 제거하여 패키지비용을 절감하는데 대한 많은 연구가 행해지고 있다. 본 연구에서는 단일 모드 광섬유와 레이저 및 광검출기를 수동적으로 광결합시킬 수 있는 실리콘 광학벤치를 제작하고 이를 사용하여 광송수신기용의 광부모듈을 제작하였다. 기판의 구조에 있어서 V-홈에 정렬된 광섬유와 플립칩 본딩되는 LD간의 위치 정밀도를 개선하기 위하여 V-홈 식각패턴과 자기정렬된 정렬마크와 솔더댐을 사용하고 레이저의 높이조절 및 열방출을 위하여 도금된 금 받침대를 도입하였다. 실리콘 광학벤치를 이용하여 수동정렬방식으로 조립된 송신기용 광부모듈은 평균 -11.75.+-.1,75 dB의 광결합효율을 나타내었고 수신기용 광부모듈은 평균 -35.0.+-.1.5 dBm의 수신감도를 나타내었다. Packaging takes an extremely important element of optical module cost due primarily to the added complication of alignment between semiconductor devices and optical fiber, and many efforts have been devoted on reducing the cost by eliminating the complicated optical alignment procedures in passive manner. In this study, we fabricated silicon optical benches on which the optical alignments are accomplished passively. To improve the positioning accuracy of a flip-chip bonded LD, we adopted fiducial marks and solder dams which are self-aligned with V-groove etch patterns, and a stand-off to control the height and to improve the heat dissipation of LD. Optical sub-assemblies exhibited an average efficiency of -11.75$\pm$1.75 dB(1$\sigma$) from the LD-to-single mode fiber coupling and an average sensitivity of -35.0$\pm$1.5 dBm from the fiber and photodetector coupling.
장권혁(Kwon Hyuk Jang),김의경(Eui Kyoung Kim),이상윤(Sang Yoon Lee),이용천(Yong Chen Lee),윤명상(Myoung Sang Yun) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.2Ⅱ
정보화 서비스를 제공하기 위해서는 사실 기반의 데이터, 데이터의 전달을 위한 네트워크 기술, 그리고, 정보를 원하는 목적에 맞게 처리하여 원하는 사용자에게 전달하여 부가적인 가치를 부여하게 하는 응용 소프트웨어로 크게 나눌 수 있을 것이다. 이러한 응용 소프트웨어 중에는 기술적, 관리적, 문서적인 측면에서 체계적으로 관리되어 있지 않아, 그 상품성을 제대로 인정 받지 못해 진정한 가치를 평가 받고 있지 못하고 있는 실정이다. 따라서, 일반 응용 소프트웨어를 상품화하여 제대로 그 가치를 평가 받을 수 있도록 준비하는 과정을 제안하고자 한다.