고온 원자로용 Mod. 9Cr-1Mo강 후판재의 깊이에 따른 미세조직 및 기계적 특성 변화

이선희,박상규,김민철,이봉상,김선진,Lee, Sun-Hee,Park, Sang-Gyu,Kim, Min-Chul,Lee, Bong-Sang,Kim, Sun-Jin 한국압력기기공학회 2011 한국압력기기공학회 논문집 Vol.7 No.2

The purpose of this study is to investigate the effects of through thickness on the mechanical properties and microstructural features in Mod. 9Cr-1Mo steels for RPVs. The microstructures at all locations were typically tempered martensite, but small amount of delta ferrite was observed at the center region. The prior austenite grain size increased with the depth from the surface. The yield strengths of center and 1/4T location were higher than that of surface by 30MPa. The impact toughness of center was low compared to those of other specimens. Also, upper shelf energy was low at the center. The toughness deterioration in center might be caused by larger size of the prior austenite grains and existence of the delta ferrite.

나일론 4 공중합물 소재의 구조와 물성 (II) -열처리 온도에 따른 영향-

이선희,조현혹,Lee, Sun-Hee,Cho, Hyun-Hok 한국섬유공학회 2011 한국섬유공학회지 Vol.48 No.6

Nylon 6-ran-nylon 4 (100/0), (80/20), (70/30) films were prepared by using melt pressing methods. The (N6- ran-N4) films were annealed in the silicon oil bath at 50, 75, 100, 125 and $150^{\circ}C$. The film properties were examined by WAXD, DSC, DMTA and moisture regain. The crystal structure in (N6-ran-N4) films increases the annealing temperature. This is very similar to the alpha phase of nylon 6. The thermal property of (N6-ran-N4) films annealed under high temperature exhibits an increase in the melting temperature and enthalpy. The moisture regain of (N6-ran-N4) films decreased when the annealing temperature was increased.

정액수가제 도입이 의료급여 혈액투석환자의 투석횟수 및 진료비에 미치는 영향

이선희,김한중,신승호,조우현,강혜영,Lee, Sun-Hee,Kim, Han-Joong,Shin, Seung-Ho,Cho, Woo-Hyun,Kang, Hye-Young 대한예방의학회 2004 예방의학회지 Vol.37 No.3

Objectives : To assess the impacts of implementing case payment system (CPS) to Medical Aid (MA) hemodialysis patients on the frequencies and expenditure of dialysis. Methods : Fifty-eight clinics and 35 tertiary care hospitals were identified as having a minimum of 10 hemodialysis patients for each of the MA and Medical Insurance (MI) programs, who received hemodialysis from the same dialysis facilities for both periods of July 2001 and July 2002. From these facilities, a total of 2,167 MA and 2,928 MI patients were identified as the study subjects. Using electronic claims data, the changes in the total number of monthly treatments and charges for outpatient hemodialysis treatments for each patient after the introduction of the CPS were compared between the MA and MI patients. Multiple regression analyses were performed to examine the independent impact of the CPS on the utilization and expenditure of dialysis treatments among the MA patients. Results : There was a significant decrease in the total charges for the hemodialysis treatments of the MA patients, 3.4% (p<0.05), whereas a significant increase was observed for the MI patients, 2.5% (p<0.05). For both the MA and MI patients, the frequency of the monthly hemodialysis treatments were significantly increased, 5.5 (from 12.1 to 12.7) and 7.8% (from 11.6 to 12.5), for the MA and MI patients, respectively. However, a multivariate regression analysis showed no significant difference in the changes in the total number of monthly hemodialysis treatments between the MA and MI patients after implementation of the CPS. Another regression model, regressing on the changes in the monthly claims of dialysis treatments, showed a significant negative coefficient for the MA ((=-70725, p<0.05). Conclusion : The significant decrease in the total charges for hemodialysis treatments among MA as compared to MI patients suggests that there was a cost reduction in the MA program following the introduction of the CPS.

우리나라 병원의 서비스 다각화추세와 관련요인분석

이선희,김한중,조우현,Lee, Sun-Hee,Kim, Han-Joong,Cho, Woo-Hyun 대한예방의학회 1991 예방의학회지 Vol.24 No.1

Service diversification is recognized as an important strategy against turbulent environmental change. This study is designed to find out the trend of service diversification in Korean health care organizations and also to identify factors associated with the degree of service diversification. Data were collected from 69 hospitals out of 71 hospitals with over 300 beds. Important findings are summarized below. 1. Types of diversification are closely related to hospital size. Large hospitals have a tendency to provide sophisticated services requiring specialized skills and equipment, while small hospital have concentrated their efforts on health screening programs. 2. The more competitive and bigger hospitals are, the greater number of services that provide. Also, hospitals operating rational management information systems provide more services. Contrary to the expectation hospitals with a low performance during last 3 years showed more service diversification. 3. A trend of more diversification was observed in hospitals whose chief executive officer used a prospector strategy. 4. A multiple regression analysis revealed that bed size, competitive environment, degree of rational management, and the growth pattern were significantly associated with the service diversification.

고속 방사된 폴리부틸렌 테레프탈레이트 섬유의 미세구조 형성과 물성

이선희,조현혹,Lee Sun Hee,Cho Hyun Hok 한국섬유공학회 2004 한국섬유공학회지 Vol.41 No.6

The effect of take-up velocity on the fine structure and properties of PBT fibers are investigated using WAXD, density, birefringence, DSC, dynamic viscoelasticity, TMA, tensile test, etc. An increase in take-up velocity caused an increase in both the density and the birefringence. In the results of WAXD equatorial profiles, the increase in the take-up velocities resulted in the formation of (010) and (100) reflections of $\beta-crystal$ and the reflection peak became sharper at the take-up velocity of 6 km/min. The initial modulus of the fiber increased when the g' fraction increased, the tenacity depended more on fractions of $\alpha-crystal$, i.e. the total crystallinity. The thermal properties of high speed spun PBT fibers were measured with DSC, dynamic viscoelasticity, TMA, etc. Endothermic curves became sharper with increasing take-up velocities, and endothermic melting peaks are shifted to high temperatures. Therefore, crystal structure was well developed in the fiber obtained at high take-up velocities. The $tan\delta$ peak is shifted and the intensity is decreased with temperature. That is, the packing density of the PBT fiber is high when the take-up velocity and orientation of amorphous region is increased. The shrinkage has a tendency to decrease with increasing take-up velocity.

Na₂Se₂을 이용한 대칭적인 다이아릴 다이셀레늄 화합물의 One-Pot 합성방법

이선희,김샛별,박명숙,Lee, Sun-Hee,Kim, Saet-Byeul,Park, Myung-Sook 대한화학회 2011 대한화학회지 Vol.55 No.3

연구발표논문초록 : 흡착 ( Ⅰ ) ; CO2 분위기에서 호도각 char 의 부활특성에 관한 연구

이선희,장윤호,조병린 ( Sun Hee Lee,Yoon Ho Chang,Byung Rin Cho ) 한국화학공학회 1985 추계총회초록집 Vol.- No.-

한국의사의 정부신뢰 관련 요인 분석: 의사단체들의 일부 임원의사들을 중심으로

이선희,양건모,서주현,김주혜,Lee, Sun-Hee,Yang, Gun-Mo,Seo, Ju-Hyun,Kim, Ju-Hye 대한예방의학회 2010 Journal of Preventive Medicine and Public Health Vol.43 No.5

Objectives: This study aims to investigate the factors related to Korean physicians' trust in the government. Methods: We used structured questionnaires that were composed of multidimensional scales for each of the various categories. Results: The recognition levels of trust of the government by Korean physicians were not high, and they ranged from 3.6 to 4.8 for ten scales. The factors related to trust in the government were categorized into seven factors on the basis of a factor analysis. On the regression analysis, a positive relationship was found between "the individual propensity to trust" and trust in the government, while a negative relationship was found between "the recognition level regarding the government as an authoritarian power" and trust in the government. "Confidence about participation in the policy process" as internal efficacy and "belief in governmental ability and motivation toward public demand" as external efficacy also showed a strong positive relationship with trust in the government. Conclusions: From these results, we can draw the conclusion that making efforts to improve the recognition level of trust in the government among physicians is an important policy task. To increase the trust level, participation of physicians in the policy process in various ways and open communication between the physicians' associations and the government should be facilitated.

의료소비자, 서비스 및 시장 특성요인과 고객충성도와의 관계 분석 -1개 중소도시의 의료이용 경험자를 대상으로-

이선희,김현미,김주혜,하귀염,Lee, Sun-Hee,Kim, Hyun-Mi,Kim, Ju-Hye,Ha, Gwi-Yeom 대한예방의학회 2008 예방의학회지 Vol.41 No.5

Objectives : This study was performed to explore customer royalty and the related factors. Methods : 900 households(a 1% sample) were randomly selected from the total population of K city located in Kangwon province. An interview survey was performed with using a structured questionnaire for the subjects(923 persons) who had used medical service during the year before the survey, and the survey was done September, 2002. Results : When comparing the relating factors related with customer royalty according to the sociodemographic characteristics, the older group showed a significantly higher level of recognition for service quality, service reputation, internal customers' attitudes and switching cost. The lower income group showed a higher level of recognition for service quality, service image and switching cost. The lower educated group showed a higher level of recognition for service reputation, service image and internal customers' attitudes. The higher educated group showed a higher level of recognition for perceived risk, and seeking variety. In addition, the expert group or the service and manufacturing workers group showed a higher level of recognition for service involvement. On multiple regression analysis, internal customers' attitudes, service image, service reputation, service quality, switching cost, and substitutability showed significant relations with customer loyalty. Conclusions : This study showed that customer loyalty was significantly influenced by service factors like internal customers' attitudes, service image, service reputation, and service quality, and by market factors like switching cost, and substitutability. The results of this study can be used as a baseline for developing strategies to create and keep customers with high loyalty.

탄소 나노섬유/PVDF-HFP 복합재로 코팅된 실크 직물의 물성

이선희,Lee, Sun-Hee 한국섬유공학회 2012 한국섬유공학회지 Vol.49 No.2

Silk fabrics were coated with carbon nano fibers (CNFs)/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) composite solution by the knife edge method. The various contents of CNFs/PVDF-HFP coated silk fabrics were investigated through their morphological, mechanical, and electrical properties. In the results regarding surface morphology, it was shown that the CNFs were evenly distributed in coated silk fabrics through SEM images; the existence of CNFs in coated silk fabrics was confirmed. For the results regarding the mechanical properties, the tensile linearity and compression linearity improved as CNFs contents increased. Also, the electrical properties of CNFs/PVDF-HFP coated silk fabrics increased with 4% CNFs contents. Therefore, the results confirm the ability of conductive textiles by using CNFs/PVDF-HFP composite-coated silk fabrics.