RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI우수등재

        등고선(等高線)을 이용(利用)한 표본추출법(標本抽出法)에 관한 연구(硏究)

        이석찬,신봉호,정성호,조영호,Lee, Suk Chan,Shin, Bong Ho,Jung, Sung Ho,Cho, Young Ho 대한토목학회 1985 대한토목학회논문집 Vol.5 No.2

        수치지형모형(數値地形模型)(Digital Terrain Model)을 제작(製作)하는데 있어서 보다 더 정확(正確)한 지형정보(地形情報)의 획득방법(獲得方法)이 매우 큰 비중을 차지하고 있다. 본(本) 논문(論文)은 지형정보(地形情報)를 획득(獲得)하는 방법(方法)의 하나인 밀도증가식(密度增加式) 표본추출방법(標本抽出方法)의 정확성(正確性) 분석(分析)에 그 목적(目的)을 두었다. 특히, 정확성(正確性) 분석(分析)에 있어서는 아래와 같은 사항(事項)에 대(對)해 비교분석(比較分析)하였다. - 도화기(圖化機)에 의해 작도된 종래(從來)의 등고선(等高線)(Conventional Contourlines)과 밀도증가식(密度增加式) 표본추출방법(標本抽出方法)을 이용(利用)하여 작도(作圖)한 수치등고선(數値等高線)(Digital Contourlines)과의 위치오차(位置誤差)에 대(對)한 비교분석(比較分析) - 밀도증가식(密度增加式) 표본추출방법(標本抽出方法)의 적용(適用)에 따른 보간점(補間點)에 대(對)한 표고오차(標高誤差)의 분석(分析) 위의 수치시험(數値試驗)을 위하여 등고선(等高線)의 자동작도(自動作圖)에 관한 전산(電算)프로그램을 작성(作成)했다. 시험결과(試驗結果)와 시산치(試算値)와 추출조건(抽出條件)은 정확도(正確度)와 밀접(密接)한 관계를 가지며, 특히 시산치(試算値) 1.0 m이고, 표준형(標準形)인 추출조건(抽出條件)에서는 종래(從來)의 등고선(等高線)과 거의 일치(一致)함을 알 수 있었다. In Digital Terrain Model(DTM), more accurate data acquisition method is of importance. This paper has the purpose of accuracy analysis of progressive sampling method, one of data acquisition method. Especially, The following in accuracy analysis are compared and analyzed. -Comparison and analysis for position error between the digital contour lines using digital terrain model and the conventional contour lines using A-10 Plotter. -Analysis for height error of interpolation points according to application of progressive sampling method. For above numerical tests, Computer Program related to auto-carto of contour lines was made up. As a result of tests, threshold and sampling criterion have close of mutual relation to accuracy. Particularly, it was found that auto-carto of contour lines-threshold of 1.0 m and standard criterion-almost concurred in conventional contour lines.

      • KCI등재

        Geminivirus L4 유전자 도입에 따른 형질전환 애기장대의 감염유사증상 분석

        이석찬,이규배,박종범,Lee, Suk-Chan,Lee, Kyu-Bae,Park, Jong-Bum 한국식물생명공학회 2003 식물생명공학회지 Vol.30 No.2

        The factors for symptom development caused by Beat curly top virus(BCTV) have been analyzed by using a molecular genetic approach based on expressing BCTV encoded proteins in transgenic plants. BCTV open reading frame (ORF) L4 expression in transgenic Arabidopsis resulted in abnormal plant development and the production of callus inflorescence stems and bumpy trichomes, confiming that this gene alone is a primary symptom determinant. The L4 gene expression by northern hybridization in transgenic plants and a range of phenotypes were analyzed.

      • KCI우수등재

        수치지형모형(數値地形模型)에 관한 연구(硏究)

        이석찬,조규전,Lee, Suk Chan,Cho, Kyu Jon 대한토목학회 1982 대한토목학회논문집 Vol.2 No.1

        DTM을 평가(評價)하는 데 가장 중요한 요소(要素)는 정확성(正確性)과 효율성(效率性)이다. DTM의 표본추출법(標本抽出法)과 그 과정(過程)은 두 요소(要素)에 크게 영향을 준다. 본(本) 연구(硏究)에서는 DTM으 효과적(?果的)인 표본추출법(標本抽出法)의 개선과 토공량(土工量)산출을 토대로 한 DTM의 정확도(正確度)를 수치시험에 의해 분석해보고자 하였다. 항공사진(航空寫眞)과 현장실측자료(現場實測資料)를 DTM의 기본자료(基本資料)로 하였으며 표본추출법(標本抽出法)으로서는 정규격자망법(正規格子網法)과 밀도증가방법(密度增可方法)을 각각 적용(適用)하였다. 특히 밀도증가식(密度增加式) 표본추출(標本抽出)에서는 DTM의 효율성(?率性)과 정확도(正確度)에 가장 크게 영향을 주는 요소(要素), 즉(卽) 시산(示算)값과 추출조건(抽出條件)을 각각 다르게 적용하였다. 그 결과(結果), 밀도증가식(密度增加式) 표본추출법(標本抽出法)에 의해 추출(抽出)된 DTM 자료(資料)는 지형(地形) 및 지세의 복잡성에 비례하여 실제지형의 특성에 잘 부합된다는 사실을 알게 되었다. 한편 시산(示算)값과 정확도(正確度)는 서로 밀접(密接)한 관계가 있으며, 시산(示算)값의 크기가 증가하였을 때 정확도(正確度)는 감소하였고 반대로 효율성(效率性)을 크게 증가되었다. 따라서 필요로 하는 정확도와 효율성을 동시에 충족 시킬 수 있도록 시산(示算)값을 결정하면 일반토목 분야의 토공량산출에 매우 효과적으로 활용될 수 있다. DTM data evaluation regards accuracy and efficiency as its most important parameters, and these two elements are sensitively influenced by the sampling technique employed and its procedure. This study attempts to improve sampling techniques and evaluate the accuracy of DTM based on earth volume calculation, using aerial photography and field survey information as basic DTM data, and a regular grid and progressive sampling method for sampling process. Especially, the progressive sampling has employed different combinations of threshold and sampling criteria, that is, parameters influential on efficiency and accuracy, for the purpose of numerical tests intended to permit comparative analysis. The tests have resulted in the findings that in progressive sampling its grid density fits in well with given terrain characteristics in proportion to their variability. and that threshold and accuracy contain close mutual relations in which an increased threshold bringing more efficency but less accuracy. It follows, therefore. that a threshold, when appropriately determined, can be of very efficient use for considerably broad applications, and particularly, will play a significant role in its application to such general civil engineering as earth volume calculation.

      • KCI우수등재

        밀도증가식(密度增加式) 표본추출법(標本抽出法)에 관한 연구(?究) - 추출조건(抽出條件)을 중심(中心)으로 -

        이석찬,조규전,Lee, Suk Chan,Cho, Kyu Jon 대한토목학회 1982 대한토목학회논문집 Vol.2 No.3

        밀도증가식(密度增加式) 표본추출법(標本抽出法)은 입력지형(入力地形)의 변이성(變異性)에 잘 부합되고 가장 효율적(?率的)인 표본추출법중(標本抽出法中)의 하나이다. 이들 효율성(?率性)들은 몇 가지의 추출조건(抽出條件)을 부과하여 잉여점(剩餘點)들을 제외(除外)시킴으로서 그 효율성(?率性)을 크게 향상(向上)시킬 수 있다. 연구(硏究)에서는 추출조건(抽出條件)으로서 4가지 즉(?), 표준형(標準形), 도약형(跳躍形), 유보형(留保形), 혼합형(混合形)을 적용하여 수치시험을 실시(實施)하였으며 그 결과 그 중에서 유보형조건(留保形條件)이 가장 주목할 만한 추출조건(抽出條件)임을 알 수 있었다. The progressive sampling method adapts well to the local variabilities of the input terrains, and is therefore one of the most efficient sampling methods in DTM. The efficiency of progressive sampling can be enhanced by increasing the comprehensiveness of grid densification criteria, with superfluous points reduced and/or suppressed. In this investigation, four different criteria were applied to the numerical test, and the suppression criterion was found the most significant among them.

      • KCI우수등재

        Digital Terrain Model을 이용(利用)한 토공량산정(土工量算定)

        이석찬,신봉호,이재효,Lee, Suk Chan,Shin, Bong Hoo,Lee, Jae Hyo 대한토목학회 1985 대한토목학회논문집 Vol.5 No.1

        According to development of the areial photogrammetry, it is uneconomical to acquire the terrain information and compute the earthwork volume of each building site by a field surveying which is used recently because it is acquired much money and time. The aim in the this thesis is to acquire the terrain information using the Digital Terrain Model (DTM) to gain in the aerial photograph and compute the rapid and economical earthwork carrying out digital test. Because of being little difference between the digital test and field (site) surveying in the earthwork volume, that result is fitter in preliminary planning than in practical planning to the extent. 항공사진측량(航空寫眞測量)이 발달(發達)함에 따라서 현재(現在) 사용(使用)되고 있는 방법(方法)인 현장측량(現場測量)으로서 각 댁지(宅地)들에 대하여 지형정보(地形情報)를 수집(蒐集)하여 토공량(土工量)을 산출(算出)한다는 것은 비용(費用)이나 시간(時間)이 많이 요구(要求)되기 때문에 비경제적(非經濟的)이다. 따라서 본(本) 연구(硏究)에서는 항공사진(航空寫眞)에서 얻은 수치지형(數値地形)모델(DTM)을 이용(利用)하여 지형정보(地形情報)를 수집(蒐集)하고 이를 수치시험(數値試驗)하므로서 신속(迅速)하고 경제적(經濟的)인 토공량(土工量)을 산정(算定)하는데 그 목적(目的)이 있다. 수치시험(數値試驗)을 해서 토공량(土工量)을 계산(計算)한 결과(結果), 현장(現場) 측량(測量)으로부터 산출(算出)된 토공량(土工量)과 차이(差異)가 미소(微小)하므로 정밀도면(精密度面)으로 보아 계획(計劃) 및 예비설계시(豫備設計時)에 적합(適合)할 것으로 여겨진다.

      • SCOPUSKCI등재
      • KCI등재

        규칙파 조건에서 케이슨 상치구조물의 설치위치에 따른 파압 특성

        전재형(Jae-Hyung Jun),이석찬(Suk-Chan Lee),김도삼(Do-Sam Kim),이광호(Kwang-Ho Lee) 한국해안해양공학회 2022 한국해안해양공학회 논문집 Vol.34 No.3

        최근 들어 건설되는 해안•항만구조물의 경우 구조물 마루에 상치구조물 설치를 통해 월파의 발생을 방지하거나 친수공간을 확보하려는 시도가 증가하고 있다. 일반적으로 설계단계에서 상치구조물에 작용하는 파압 산정은 설계파의 처오름을 고려하여 구조물의 전면에 작용하는 Goda 파압식을 적용하고 있다. 하지만, 내습파랑이 구조물의 마루를 월파하는 경우 상치구조물의 설치위치에 따라 Goda 파압을 상회하는 파압이 작용할 수 있다. 본 연구에서는 직립 케이슨을 대상으로 수리모형실험 및 수치모의를 통해 상치구조물에 작용하는 파압산정에 대한 Goda 파압식의 적용성을 분석함과 동시에 상세한 수치모델결과를 기반으로 상치구조물에 작용하는 파압의 크기를 고찰하였다. 그 결과, 상치구조물에 작용하는 파압은 정수면에 작용하는 최대파압에 비해 최대 120%까지 발생함을 확인하였다. 또한, 이러한 상치구조물의 작용파압은 구조물 마루에서 월파수심에 따른 Froude number에 지수함수적으로 증가함을 확인하였으며 Froude number에 기반한 파압의 예측을 위한 경험식을 제안하였다. In recent years, coastal and port structures have attempted to prevent wave-overtopping or provide waterfront areas by installing superstructures on the structural crowns. In general, in the design stage, the Goda formula acting on the front the structure is applied to calculate the wave pressure acting on the superstructure in consideration of the wave-runup of the design wave. However, the wave pressure exceeding the Goda wave pressure could generate depending on the installation location of the superstructure where the wave-overtopping occurs. This study analyzed the applicability of the Goda formula to the wave pressure calculation for the superstructure of the vertical structures through hydraulic model experiments and numerical simulations. Furthermore, this study investigated the magnitude of the wave pressure acting on the superstructure based on detailed numerical results. As a result, the wave pressure acting on the superstructure was up to 120% higher than the maximum wave pressure on the still water surface. In addition, the wave pressure increases exponentially with the Froude number computed by the overtopping water depth at the crown of the structure, and we proposed an empirical formula for predicting the wave pressure based on the Froude number.

      • KCI등재

        감자 (Solanum tuberosum L.) CycD3유전자의 분리 및 특성 분석

        강인홍,최승호,이홍근,황현식,이석찬,정태영,임학태,배신철,Kang, In-Hong,Choi, Seung-Ho,Lee, Hong-Geun,Hwang, Hyun-Sik,Lee, Suk-Chan,Jung, Tae-Young,Lim, Hak-Tae,Bae, Shin-Chul 한국식물생명공학회 2003 식물생명공학회지 Vol.30 No.4

        D-type cyclins are believed to regulate the G1 to S phase transition in response to nutrient and hormonal signals. We investigated the expression characteristics of the key cell-cycle regulators, mitotic and G1 cyclins in potato (Solanum tuberosum L.). We isolated D-type cyclin gene from potato and it was classified as D3 cyclin by sequence similarities and a phylogenetic analysis, and named as StcycD3;1. The accumulation of transcripts was predominantly associated with mitotically active organs, such as stolons, roots, flowers, leaves, and stems. Transcription of StcycD3;1 can be induced by sucrose. D-type cyclin은 호르몬과 영양분의 영향을 받아 세포주기의 G1기에서 S기로 전환을 조절하는 인자이다. 우리는 감자에서 이 유전자를 분리 해냈고, 염기서열 분석을 통하여 D3 cyclin으로 분류하였다. 그리고 StCycD3;1이라 명명하였다. 다른 D cyclin유전자가 세포 분열이 활발한 조직에서 발현되는 것과 같이 StCycD3;1은 감자의 괴경, 뿌리, 꽃, 잎, 줄기, 뿌리줄기, 복지에서 다양한 발현 양상을 보였고, 영양분의 하나인 sucrose에 의하여 발현이 유도되는 것을 확인하였다.

      • KCI등재
      • SCOPUSKCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼