http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허유,이재원,이석규,Huh, You,Lee, Jae-Won,Lee, Suck-Gyu 대한기계학회 1995 大韓機械學會誌 Vol.35 No.1
지금에 이르기까지 직기개발을 위한 주안점은 새로운 위입시스템(water-jet, air-jet)의 개발과 지속적인 직기의 생산속도증가에 대한 각 위입요소들의 최적동작을 위한 기계요소의 개발에 주 어져 있었다. 반면에 위입동작과 직접 연관되지 않는 직기의 구성요소들은 증가하는 위입속도에 따라 각 기능의 안정성과 동작의 정확성에 대한 요구가 점차 증가되었으며, 특히 경사장력 및 이에 작용하는 기계요소들에 대한 기술적 요구수준은 과거의 북직기에서의 경우에 비교될 수 없을 정도의 한계적 상황을 만족시켜야 하게 되었다. 경사송출의 경우, 위사 1가닥이 공급될 때 마다 직물권취에대응하여 경사장력을 일정하게 유지하며, 경사의 일정 길이를 정확히 공급하여야 하기 때문에 고속 무북직기에서는 빠른 응답속도와 안정된 동작을 행할 수 있는 경사송출기구 및 장력제어시스템의 성능이 직기성능에 가장 큰 영향을 미치게 되었으며 지금까지 사용되어온 기계적 송출장치로는 한계적 기술요건을 만족시킬 수 없게 되었다. 이에 따라 근자에 이르러 경사장력제어형 장력송출장치의 응용이 크게 대두되고 있다. 이 글에서는 이러한 새로운 형태의 송출장치의 개발상황과 경사장력제어에서 해결되지 못한 문제점에 대하여 다루어 보고자 한다.
송출 및 권취 장력제어 시스템 개발에 관한 연구(II);장력거동의 수학적 모델링
허유,장승호,이석규,Huh, You,Jang, Seung-Ho,Lee, Suck-Gyu 한국섬유공학회 1998 한국섬유공학회지 Vol.35 No.9
In the weaving process the variations of the warp yarn tension cause irregularities of the weft density of the woven fabrics. Due to the fact that warp yarn tension varies in a great extent depending on the ratios of the take-up and the let-off speed, it is necessary to regulate the speed of let-off in relation to that of take-up operation for keeping warp yarn tension in a certain range allowable for the fabric quality. Therefore it is indispensable to analyze the dynamic characteristics of the take-up and let-off system for obtaining the weaving process optimally. In this research it was tried to get the dynamic characteristics of the let-off/take-up process theoretically, and the behavior of the warp yarn tension was simulated on the basis of the mathematical model, depending on the let-off and take-up speed, tensile properties and feeding tension of the warp yarns. From this research the following results could be obtained: 1) dynamic warp yarn tension can be described by a differential equation, however, nonlinearly with respect to the take-up speed, 2) the behavior of warp yarn tension has a characteristics of a 1st order system in the case of a constant take-up speed, and 3) variations of warp yarn tension can always occur when take-up speed changes.
송출 및 권취 장력제어 시스템 개발에 관한 연구(I) -주파수 응답법에 의한 동특성 해석-
허유,문승룡,장승호,이석규,Huh, You,Moon, Seung-Ryong,Jang, Seung-Ho,Lee, Suck-Gyu 한국섬유공학회 1997 한국섬유공학회지 Vol.34 No.3
The variation of the warp yarn tension in the weaving process causes the irregularity of the weft density of woven fabrics. In particular, the warp yarn tension varies to a great extent when the take-up speed, the let-off speed do not coincide. Therefore it is necessary to maintain the warp yarn tension constant by controlling the let-off speed, considering the take-up speed and warp beam diameter. In general, it is indispensable to know the dynnamic characteristics in order to control a system optimally. Here, the dynamic characteristics of the let-off/take-up process were studied experimentally, using the frequency response method. For the weaving machine developed for this study, the let-off system was driven by a servo-motor. The warp yarn tension was measured by the backrest movement which was in the state of equilibrium with the loading force of a spring. A load cell was connected to the spring. From the experiments it was observed that the test process, namely the interval between the let-off system and the warp yarn tension measurement, had the dynamic characteristics of an integral system and the warp yarn tension could be measured by the movement of the backrest loaded by a spring.