류건휴의 『溪湖學的』과 『異學集辨』에 나타난 후기 영남학파의 ‘도통’과 ‘벽이단’ 의식

이상호(Lee Sang-ho) 한국동양철학회 2009 동양철학 Vol.0 No.32

이 논문은 19세기 초 호파계열에서 병호시비를 주도했던 류건휴의 『계호학적』과 『이학집변』을 중심으로, 후기 영남학인들의 도통과 이단에 대한 인식을 살펴보고 있다. 특히 이 두 책은 이황의 적통이 누구에게 이어졌는지를 중심으로 진행된 병호시비의 중요한 이론적 근거가 되었던 것으로, 향후 정재학파의 이론적 토대에 중요한 영향을 끼쳤다. 『계호학적』은 이황의 도통이 이상정에게 있다는 사실을 밝히기 위해 이상정의 어록과 문집 내용을 발췌하여 이황의 입장과 비교할 수 있도록 편집한 책이다. 『근사록』과 같은 편집체계를 통해 이상정의 철학이 이황과 완전하게 일치한다는 사실을 드러내려고 했던 것이다. 이에 비해 『이학집변』은 퇴계학의 정통성을 공고히 하기 위한 작업으로서의 성격을 가지고 있다. 이단에 대한 강한 비판을 통해 주자학 내에서의 퇴계학 정통성을 공고히 하려고 했던 것이다. 이와 같은 류건휴의 작업은 당시의 시대적 상황 속에서 ‘도통 확립의 필요성’과 이단 비판을 통한 ‘정학正學 보존의 노력’에 따른 것으로, 이를 통해 우리는 후기 영남학파의 인물들이 무엇을 중심으로 생각하면서 살아갔는지를 잘 알 수 있다. 정치적으로 이미 중앙으로부터 소외된 상태에서 그들 스스로의 자긍심과 자부심을 만들어 내고 있으면, 동시에 스스로 주자학적 정통에서 있음을 밝힘으로써 학문적인 우위성을 확보하려는 노력의 일환인 것이다. 더불어 기호학파로부터 받을 수 있는 조금의 의심에 대해서도 철저하게 불식시켜 나감으로써, 자신들 학문의 정통성을 드러내려고 했던 것이다. The purpose of this essay is to examine cognizance of 'taotung(道統: Legitimate Transmission of the Orthodoxy)' and heresy of late Yeungnam School, focused on Ryu, Geon-Hyu's "Gyeho-hakjeok(溪湖學的)" and "Yihak-jipbyeon(異學集辨)", which took the lead in Byungho Dispute(屛虎是非) in Ho faction of the early 19th century. Specially, for the next, these books affected theoretical foundation of Jeongjae School, become theoretical foundation of ByungHo Dispute which is gone on problem of whom the main line of descent of Lee Hwang is continued. Geyho-hakjeok is the book which we can compare to standpoint of Lee Hwang extracting contents of collection of works and quotations of Lee, Sang-Jeong by the book, to define the fact there is the main line of descent of Lee Hwang in Lee, Sang-Jeong. Through a system of edit like Keunsarok(『近思錄』), we can see that philosophy of Lee, Sang-Jeong perfectly correspond with it of Lee Hwang. In comparison, Yihak-jipbyeon has character as work for solidifying legitimate of Toegye's Philosophy. It is to solidify legitimate of Toegye's Philosophy in Zhuxi Studies through strong criticism about heresy. These works of Ryu, Geon-Hyu is caused by 'effort of preservation of Righteousness Philosophy(正學)' through 'necessity of establishing Taotung' and criticism of heresy, on this wise, we can see about what persons of Yeungnam School thought and lived. They make own self-esteem and pride in politically a shunned situation from the central government, at the same time, this is part of effort to secure scientific superiority, by defining that which is on legitimacy of Zhuxi Studies; besides, they was going to reveal legitimacy of own science, by eliminating a little suspicion from kiho School(畿湖學派).

정수 직교 겹침 변환을 이용한 이미지 압축

이상호,장준호,김영섭,임상민,Lee, Sang-Ho,Jang, Jun-Ho,Kim, Young-Seop,Lim, Sang-Min 한국반도체디스플레이기술학회 2009 반도체디스플레이기술학회지 Vol.8 No.3

Recently, block-based transforms, like discrete cosine transform (DCT), have been widely used in image and video coding standards, but block-based transforms have a weak point with blocking effect. However, the integer lapped orthogonal transform (ILOT) is a tool for block-based coding with bases functions that overlap near blocks, so it has a strong point against blocking effect. Although it has slightly higher arithmetic complexity than the DCT, the coding gain is significantly higher with much less blocking artifacts. This paper introduces the integer lapped orthogonal transforms and discrete cosine transform. And we compare the performance of DCT with ILOT which is proposed a new efficient method for image coding applications.

내구시험의 무인 주행화를 위한 비포장 주행 환경 자동 인식에 관한 연구

이상호,이정환,구상화,Lee, Sang Ho,Lee, Jeong Hwan,Goo, Sang Hwa 한국시스템엔지니어링학회 2005 시스템엔지니어링학술지 Vol.1 No.2

In this paper, an algorithm is presented to recognize road based on unpaved test courses image. The road images obtained by a video camera undergoes a pre-processing that includes filtering, gray level slicing, masking and identification of unpaved test courses. After this pre-processing, a part of image is grouped into 27 sub-windows and fed into a three-layer feed-forward neural network. The neural network is trained to indicate the road direction. The proposed algorithm has been tested with the images different from the training images, and demonstrated its efficacy for recognizing unpaved road. Based on the test results, it can be said that the algorithm successfully combines the traditional image processing and the neural network principles towards a simpler and more efficient driver warning or assistance system.

내시경을 이용한 경흉강 늑막외측 접근 흉추 추간판 절제술 3례 - 수술수기 증례보고 -

이상호,전상협,최종렬,이호연,정병주,임상락,Lee, Sang-Ho,Jeon, Sang-Hyeop,Choi, Jong-Yeul,Lee, Ho-Yeon,Jung, Byung-Joo,Lim, Sang-Rak 대한신경외과학회 2000 Journal of Korean neurosurgical society Vol.29 No.12

Microsurgical transthoracic extrapleural approach for thoracic discectomy in three cases were modified and simplified in order to achieve better exposure of ventral extradural space than posterolateral extrapleural(lateral extracavitary) approach and less pulmonary complications than transthoracic transpleural approach. These approaches were optimized by microscope and video-assistance. Surgery was followed by clinical improvement in all patients. The results of treatment seem to support the use of these modified techniques as adequate surgical treatment of thoracic disc herniations without any complications.

건축용 시멘트 혼합토의 워커빌리티 특성

이상호,김진호,김상철,Lee Sang-Ho,Kim Sang-Chul,Kim Jin-Ho 한국농공학회 2006 한국농공학회논문집 Vol.48 No.4

This study was conducted by the slump test and the consistency test of the cement mixed soil which is soil mixed with cement to investigate and estimate the difficulty degree of work and the proper water content. So I would like to present the fundamental data that establish the work standard of the cement mixed soil. In conclusion, in this study the slump value of the cement mixed soil increases over-all according to the increase of the water content although it has a little difference of the increase range and it is smaller than one of the soil. It is estimated that the aggregating and throwing work of the cement mixed soil which is mixed with 6% and 9% cement would be fine when it has the $25%{\sim}27%$ water content and the wall plastering work is the $30%{\sim}32%$ and the floor plastering work is the $30%{\sim}35%$ and the flowing and pouring work is the $40%{\sim}42%$ water content as well as the mold compacting work is the 20%.

반도체 습식 세정 공정 중 상온의 초순수와 염기성 수용액 내에서 오존의 용해도 최적화

이상호,이승호,김규채,권태영,박진구,배소익,이건호,김인정,Lee Sang-Ho,Lee Seung-Ho,Kim Kyu-Chae,Kwon Tae-Young,Park Jin-Goo,Bae So-Ik,Lee Gun-Ho,Kim In-Jung 한국반도체디스플레이기술학회 2005 반도체디스플레이기술학회지 Vol.4 No.4

The process optimization of ozone concentration and half life time was investigated in ultra pure water and alkaline solutions for the wet cleaning of silicon wafer surface at room temperature. In the ultra pure water,. the maximum concentration (35 ppm) of ozone was measured at oxygen flow rate of 3 liters/min and ozone generator power over 60%. The half life time of ozone increased at lower power of ozone generator. Additive gases such as $N_2$ and $CO_2$ were added to increase the concentration and half life time of ozone. Although the maximum ozone concentration was higher with the addition of $N_2$ gas, a longer half life time was observed with the addition of $CO_2$. When $NH_4OH$ of 0.05 or 0.10 vol% was added in DI water, the pH of the solution was around 10. The addition of ozone resulted in the half life time less than 1 min. In order to maintain high pH and ozone concentration, ozone was continuously supplied in 0.05 vol% ammonia solutions. 3 ppm of ozone was dissolved in ammonia solutions. The static contact angle of silicon wafer surface became hydrophilic. The particle removal was possible alkaline ozone solutions. The organic contamination can be removed by ozonated ultra pure water and then alkaline solution containing ozone can remove the particles on silicon surface at room temperature.

흉추 추간판 탈출증에서 흉강경하 흉추간판 절제술

이상호,임상락,이호연,전상협,한영미,정병주,Lee, Sang Ho,Lim, Sang Rak,Lee, Ho Yeon,Jeon, Sang Hyeop,Han, Young Mi,Jung, Byung Joo 대한신경외과학회 2000 Journal of Korean neurosurgical society Vol.29 No.12

Objectives : Among the various types of minimally invasive spine surgeries, thoracoscopic surgery is becoming more widely accepted and increasingly utilized. This report delineates our clinical experience using thoracoscopy to resect herniated thoracic discs in 16 patients who suffered from myelopathy or intolerable radiculopathy. Patients and Methods : Between Mar. 1997 and Sep. 1999, 16 consecutive patients underwent thoracoscopic discectomy for treatment of herniated thoracic discs. There were 12 men and 4 women(mean age 43.5 years ; range 18-61 years). Eleven patients presented with myelopathic signs and symptoms from spinal cord compression and 5 patients had incapacitating thoracic radicular pain without myelopathy. The surgical level was varied between T3 and T12. The pathology of specimen were 11 hard discs and 5 soft discs herniations. Thoracoscopic techniques were performed with long narrow spine instruments and high speed drill through 3 or 4 ports under one lung ventilated general anesthesia. During the operation three patients were converted to open thoracotomy due to intolerable one lung ventilation, excessive bleeding and inadequate operation field. The mean operation time was 264min.(range : 100-420min.), and postoperative mean admission period was 11 days. Results : Clinical and neurological outcomes were good in all patients(mean follow-up period 20 months). Among the eleven myelopathic patients, 8 improved neurologically, and 3 stabilized. Among the five radiculopathic patients, 4 recovered completely and no patient had worsened. Postoperative complications were pleural effusion in one case, intercostal neuralgia in one, delayed hemopneumothorax in one, prolonged air leakage in one and pneumonia in one case. Conclusions : Thoracoscopic discectomy needs a steep learning curve to be familiar to anatomical space and handling of endoscopic instruments. However, it is technically feasible and can be effectively performed with acceptable results.

각형강관 트러스의 N형 접합부의 거동

이상호,이상섭,배규웅,문태섭,Lee, Sang Ho,Lee, Sang Sup,Bae, Kyou Woong,Moon, Tae Sup 한국강구조학회 1999 韓國鋼構造學會 論文集 Vol.11 No.3

The aim of this paper is to examine the behavior of the N-joints using square hollow sections and to improve the structural performance without reinforcing the joints. The selected parameters are the ratio of web to chord width, gap to chord width and eccentricity to chord width. Comparison between test results and codes shows the fact that the NPE-type has superior structural properties to the NSE-type in ultimate strength and deformation capacity. The experimental formulae based on the regression analysis are proposed. Ultimate strength formula employed in eurocode 3 is revised and proposed for the NSE-type. And ultimate strength formula including the eccentricity to chord width ratio which effects on the ultimate strength is proposed for the NPE-type. 본 연구는 각형강관을 이용한 프랫트러스의 N형 접합부의 거동을 연구하는 것으로 접합부를 보강하지 않고 접합형상만을 변화시켜 접합부의 구조적 특성을 향상시키는데 그 목적이 있다. 주요변수는 주관에 대한 지관의 폭비, 압축지관과 인장지관 사이의 갭 크기비와 편심비 등이며, 지관회전 여부에 따라 분류, 정방형(NSE계열)과 지관 $45^{\circ}$ 회전형(NPE계열)에 대한 각종 변수별 내력과 변형성상을 실험을 통해 규명하였으며, 지관을 $45^{\circ}$ 회전할 경우 최대내력 및 변형성상이 재선됨을 밝혀내었다. 또한, 실험결과로부터 각 계열별 평균극한강도식을 도출하였으며, NSE계열의 경우 현행 유럽의 규준식을 국내 실정에 맞도록 수정, 제안하였고, NPE계열은 편심비의 영향을 고려할 수 있는 실험식을 제안하였다.

이어도 종합해양과학기지의 복사관측소 환경 개선 및 국제화 추진 전략

이상호,조일성,이규태,김부요,정현석,임세훈,변도성,이주영,LEE, SANG-HO,Zo, Il-SUNG,LEE, KYU-TAE,KIM, BU-YO,JUNG, HYUN-SEOK,RIM, SE-HUN,BYUN, DO-SEONG,LEE, JU-YEONG 한국해양학회 2017 바다 Vol.22 No.3

정확한 복사 관측자료는 기후 및 날씨뿐만 아니라 해양과 건축 및 농 축산 분야 등 중요하게 활용된다. 특히 이어도와 같은 종합 해양과학기지는 주변 환경에 의한 복사 반사 효과를 최소화할 수 있기 때문에 이상적인 관측소로 평가되며 여기서 생산되는 자료는 복사관측의 기준 자료가 될 수 있다. 또한 BSRN (Baseline Surface Radiation Network) 등 세계복사관측그룹 가입을 위한 필수 장비들(전천과 직달 및 산란 일사계 등)을 갖추고 관측소 환경을 개선할 경우 전 세계적인 중요 관측소로 부각될 수 있는 여건을 갖추고 있다. 이어도 종합해양과학기지는 2004년 11월부터 일사계 관측을 수행해 왔고 이 연구에서는 2005년 1월 1일부터 2015년 12월 31일까지의 자료를 분석하였다. 이 연구 기간에 이어도의 일평균 일사량은 $-3.80W/m^2/year$로 감소하였고 그 이유는 자연적 원인 이외에 관측장비의 센서 반응도 감소 효과가 포함되어 있기 때문이다. 즉 이어도 종합해양과학기지의 경우 정밀한 복사 관측 자료를 생산하기 위해서는 관측소 환경 개선뿐만 아니라 관측장비 및 자료 보정이 요구된다. 그리고 한반도의 대기 청정도와 국민 건강을 크게 위협하고 있는 중국발 황사와 미세 먼지는 전 세계 과학자들의 중요 관심 대상이기 때문에 이어도뿐만 아니라 신안 가거초 및 옹진 소청초 종합해양과학기지 복사 관측자료를 통한 공동 대응 근거 마련이 필요하며 그에 따라 이들 복사관측소 환경 및 장비 개선 그리고 관측자료 정확성 향상 계획 수립이 시급하다. The radiation observation data will be used importantly in research field such as climatology, weather, architecture, agro-livestock and marine science. The Ieodo Ocean Research Station (IORS) is regarded as an ideal observatory because its location can minimize the solar radiation reflection from the surrounding background and also the data produced here can serve as a reference data for radiation observation. This station has the potential to emerge as a significant observatory and join a global radiation observation group such as the Baseline Surface Radiation Network (BSRN), if the surrounding of observatory is improved and be equipped with the essential radiation measuring instruments (pyaranometer and pyrheliometer). IORS has observed the solar radiation using a pyranometer since November 2004 and the data from January 1, 2005 to December 31, 2015 were analyzed in this study. During the period of this study, the daily mean solar radiation observed from IORS decreased to $-3.80W/m^2/year$ due to the variation of the sensor response in addition to the natural environment. Since the yellow sand and fine dust from China are of great interest to scientists around the world, it is necessary to establish a basis of global joint response through the radiation data obtained at the Ieodo as well as at Sinan Gageocho and Ongjin Socheongcho Ocean Research Station. So it is an urgent need to improve the observatory surrounding and the accuracy of the observed data.

Ruthenium CMP에서 Cerium Ammonium Nitrate와 알루미나 연마 입자가 연마 거동에 미치는 영향

이상호,이승호,강영재,김인권,박진구,Lee, Sang-Ho,Lee, Sung-Ho,Kang, Young-Jae,Kim, In-Kwon,Park, Jin-Goo 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.9

Cerium ammonium nitrate (CAN) and nitric acid was used an etchant and an additive for Ru etching and polishing. pH and Eh values of the CAN and nitric acid added chemical solution satisfied the Ru etching condition. The etch rate increased linearly as the concentration of CAN increased. Nitric acid added solution had the high etch rate. But micro roughness of etched surfaces was not changed before and after etching, The removal rate of Ru film was the highest in $1wt\%$ abrasive added slurry, and not increased despite the concentration of alumina abrasive increased to $5wt\%$. Even Ru film was polished by only CAN solution due to the friction. The highest removal rate of 120nm/min was obtained in 1 M nitric acid and $1wt\%$ alumina abrasive particles added slurry. The lowest micro roughness value was observed in this slurry after polishing. From the XPS analysis of etched Ru surface, oxide layer was founded on the etched Ru surface. Therefore, Ru was polished by chemical etching of CAN solution and oxide layer abrasion by abrasive particles. From the result of removal rate without abrasive particle, the etching of CAN solution is more dominant to the Ru CMP.