http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이병용,Lee, Byeong-Yong 한국정보디스플레이학회 2003 인포메이션 디스플레이 Vol.4 No.4
양방향 TV 시대에는 해상도 뿐만 아니라 사운드의 다양화 및 고음질화 되어 시각과 청각 특성 모두가 현장감, 박진감에 버금하는 시스템으로 변경되는 홈시어터 경향으로 더불어 오락 경기도 PC Game에서 Video Game의 위주로 전환 싯점에서는 사운드의 현장감은 더욱 더 절실히 요구되므로, 마이크폰닉에 대한 CRT의 특성 보완이 절실히 요구된다. 따라서, 본 보고서는 열적 변형과 좌굴에 의한 구조물의 안정성을 확보하기 위해서 Invar와 AK의 복합인 Claded Steel에 대한 좋은 특성을 소개하고자 한다.
데이터 흐름을 반영하는 임베디드 시스템의 코드 자동 생성기 설계
이병용 ( Byeong-yong Lee ),류호동 ( Ho-dong Ryu ),권진욱 ( Jin-wook Kwon ),석미희 ( Mi-heui Seok ),이우진 ( Woo Jin Lee ) 한국정보처리학회 2010 한국정보처리학회 학술대회논문집 Vol.17 No.1
오늘날 임베디드 환경에서의 하드웨어의 발전에 더불어, 소프트웨어의 복잡도가 점점 증가하고, 유지 보수에 대한 비용이 증가함에 따라 UML모델을 이용한 자동코드 생성에 대한 관심이 더욱 커지고 있다. UML을 이용한 코드 생성의 효과적으로 이루어지기 위해서는 설계된 모델의 무결성이 요구되고 이를 위해서는 모델의 논리적 검증이 선행되어야 한다. 아울러 설계자로 하여금 정의하는 모델이 명확하게 이해되고 구현될 있어야 한다. 하지만 코드 생성의 행위적 관점의 기본이 되는 상태머신 다이어 그램에서 잘 드러나는 흐름과는 다르게 데이터의 사용은 다이어그램 내부에 숨겨져 있어 설계자로 하여금 모델에 대한 이해를 어렵게 하고 잠재적인 에러의 내포 가능성이 제기되어 왔다. 본 논문은 이러한 문제의 해결을 위해 코드 내포 상태머신 다이어그램의 데이터 시각화기법을 이용하고, 이러한 시각화 기법을 이용하여 데이터 사용관점에서의 모델의 이해를 도움과 동시에 이를 통하여 더욱 정확한 모델링을 수행하고 더불어 이를 통해 최종적으로는 더욱 효율적인 형태의 코드를 생성하는 코드 자동 생성기의 설계를 제안 한다.
부분예산분석을 이용한 오제스키병 발생 농가의 경제적 손실 추정
박선일,박최규,문운경,윤하정,이병용,이상진,Pak, Son-Il,Park, Choi-Kyu,Moon, Oun-Kyong,Yoon, Hachung,Lee, Byeong-Yong,Lee, Sang-Jin 대한수의학회 2009 大韓獸醫學會誌 Vol.49 No.4
Aujeszky's disease (AD) is a respiratory, infectious viral illness associated with high mortality, especially in neonatal piglets and has frequently been considered an economically important disease in many endemic countries. Although AD is still occurring in a geographically defined region in Korea, little attention has been paid to the economics of AD. In this study, partial budget technique was used to develop a simulation model to measure financial losses following the disease epidemic in a swine operation utilizing stochastic or deterministic parameters from the literatures and the index case herd of AD occurred in 2005, where available and applicable. For the infected case herd with a 12500-pig, the total economic loss for this operation was estimated to be about 199 million Korean won (95% confidence interval [CI] 148,645,000-250,741,000). Given net loss due to death of a pig at sow level was 119,000 won, total loss for the case herd with 1200 sows accounted for 143 million won (95% CI 92,599,000-193,729,000). The net loss of the death of one pig at growing and fattening level resulted in loss of 46,000 won (95% CI 40,000-53,000) and 126,000 won (95% CI 122,000-131,000), respectively. Taking into account for the number of pigs raised in the case herd, total loss amounted to 8 million won (95% CI 7,167,000-9,347,000) and 12 million won (95% CI 11,959,000-12,891,000), for growers and fatteners, respectively, assuming 63% of saved feed intake when a pig dies halfway through the respective period. Under the model's assumptions, suckling pig mortality was the major factors of loss in estimating the economic consequences (approximately 71.8% of the total loss). The high economic losses of a herd infected with AD suggest that the effective and region-specific control measures should be implemented in disease endemic foci.
김문기(Munki Kim),이병용(Byeong-Yong Lee),임병직(Byoungjik Lim),김종규(Jong-Gyu Kim),최환석(Hwan-Seok Choi) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.11
연료 과농 조건에서 작동하는 가스발생기의 검댕 발생량을 최소화하기 위해 제작된 이중 영역 가스발생기에 대한 설계점 500초 연소시험을 수행하였다. 발생된 검댕이 터빈 노즐에 쌓이는 정도를 터빈노즐 지름을 계산하여 비교하였다. 그 결과 기존의 단일 영역 가스발생기과 비교하여 이중 영역 가스발생기의 터빈 노즐 지름이 줄어드는 경향이 크게 다르지 않아 검댕 발생을 억제하는 효과는 크지 않은 것으로 확인되었다. A two-zone gas generator is manufactured to minimize the amount of soot produced at the fuel rich condition. The long-duration tests of the two-zone gas generator are conducted. The diameter of turbine nozzle is calculated to estimate the amount of soot accumulated on the surface of nozzle. The results of hot-firing test show that the decrease of the turbine nozzle diameter of two-zone gas generator is similar to that of single-zone gas generator and this means that two-zone gas generator is not effective to suppress the production of soot.
액체-액체 핀틀 분사기의 운동량 변화에 따른 분무특성 및 혼합특성에 관한 연구
강동혁(Donghyuk Kang),황도근(Dokeun Hwang),이병용(Byeong-Yong Lee),김종규(Jonggyu Kim),최환석(Hwan-Seok Choi),고영성(Youngsung Ko) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.11
액체로켓엔진에서 추진제 유량 조절에 의한 추력 조절 방식 중 핀틀 분사기는 간단하면서도 신뢰성이 우수한 것으로 평가된다. 본 논문에서는 직사각형 2열 오리피스를 갖는 1.5 톤급의 액체-액체핀틀 분사기를 설계 및 제작하여, 운동량비를 0.83 ~ 1.17까지 변화하여 케로신과 물을 사용하여 분무형상과 혼합특성을 확인하였다. 분무형상은 직접사진기법으로 CCD 카메라를 사용하고, 혼합특성은 패터네이터를 사용하였다. 운동량비 0.83에서 분사 각도가 가장 작고, 혼합 효율이 높은 것을 확인하였다. The pintle injector is known to be simple and reliable among thrust control methods by propellent control in liquid rocket engine. In this paper, a 1.5 ton liquid-liquid pintle injector with a rectangular two-row orifice was designed and manufactured, and the spray shape and the mixing characteristic were confirmed using kerosene and water with the momentum ratio form 0.83 to 1.17. The spray shape was measured using a back-lit strobe imaging technique and mixing characteristic was measured using a mechanical patternator. It has been found that the momentum ratio 0.83 has the smallest spray angle and the highest mixing efficiency.