http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이문용,Lee, Mun-Yong 한국과학기술단체총연합회 1971 과학과 기술 Vol.4 No.4
머릿말 1.국토계획수립연혁 2.총설 3.부문별계획 요지 가.공업개발기반의 확충 나.농수산업생산기반의 확충 다.도로계획 라.철도계획 마.항만계획 바.통신시설의 확충 사.도시개발게획 아.생활환경개선 자.수자원계획 차.국토보전 4.권역계획 결어
이문용(Mun-yong Lee),강창룡(Chang-young Kang),류성지(Sung-ji Ryu) 한국자동차공학회 2004 한국자동차공학회 지부 학술대회 논문집 Vol.- No.-
Compared with the hydroforming technology for steel, the hydroforming technology for aluminum has not been actively investigated. Recently, the hydroforming of high strength aluminum tubes has attracted great interest because of its good strength to weight ratio. In this study, front side member (FSM) is fabricated with the hydroforming of aluminum tube and the mechanical properties and dimensional accuracy of the hydroformed FSM is investigated. For hydroforming process, extruded aluminum tubes with ribs to improve the structural rigidity are used. To ensure the mechanical properties, the aluminum tubes are T6 heat-treated before hydroforming
이문용(Lee, Mun Yong),이대현(Lee, Dae Hyeon),권순철(Kwon, Soon Chul) 한국디자인리서치학회 2019 한국디자인리서치학회 학술대회 자료집 Vol.2019 No.1
Recently, with the emergence of new media such as VR / AR and the development of computer graphics technology, there is a growing interest in 3D graphic contents that can provide high realism. In this regard, research on the generation of 3D data of real-world objects or figures using 3D scanning technology is continuously conducted. Recently, several attempts have been made to generate and transmit real-time front 3D data by interfacing not only simple generation but also multiple 3D scanning devices. In this paper, we propose a direct approach to 3D scanning devices in Unity, a game engine that is commonly used for 3D scanning based real-time 3D data generation and transmission. Unlike the existing method of loading 3D data through a file, this is a method of directly accessing a method that can effectively reduce the time required for real-time 3D data transmission. For the experiment, we used Stereo Labs Zed camera that can perform real-time 3D scan and propose a new method by comparing the processing speed, CPU and point cloud size with the existing method.
최은희,이문용,정진희,윤성이,Choi, Eunhee,Lee, Mun-Yong,Jeong, Jin-Hee,Yoon, Sung-Yee 한국관개배수위원회 2014 한국관개배수논문집 Vol.21 No.1
Excessive emission of greenhouse gases from fossil fuels usage has become a major cause of climate change. As an alternative to reduce the greenhouse gas emission, renewable energy has been highlighted around the world and UK government also established the Climate Change Act 2008 and policies for response the climate change. Those of them has been supporting many practical actions for reducing greenhouse gas emission and community energy projects is representative program to supporting security of energy supply and helping the country to reduce its carbon footprint. Rural Community Energy Fund (RCEF) which is one of community energy projects supports rural communities to develop renewable energy projects which provide economic and social benefits to the community. The review of UK's renewable energy policies and action plan can be useful to promote in Korea policies for becoming low-carbon society.
최은희,이문용,윤영만,김창현,윤성이,Choi, Eun-Hee,Lee, Mun-Yong,Yoon, Young-Man,Kim, Chang-Hyun,Yoon, Sung-Yee 한국유기농업학회 2012 韓國有機農業學會誌 Vol.20 No.4
This study was carried out to evaluation of biomass generation mechanisms and to propose the estimation method of biomass generation. Agricultural by-product biomass is generated during crops cultivation and after harvest. However these are not uniformly generated yearly and these depending on the seasons. For planning of biomass utilization, accurate information of the biomass resources is needed, especially characteristic and productivity of biomass are necessary. Agricultural by-product biomass are generated in a wide area being scattered and it is one of the major reason why agricultural biomass utilization is not activated compared with other waste biomass. In this study, estimation and evaluation biomass generation is achieved in specific spatial and temporal boundary, A-city in Gyeongi-do and september to November respectively. Quantity and quality of by-product biomass show big difference depending on the crop species and cultivation periods and these difference bring up that accurate biomass estimation should be considered during planning of biomass utilization and technology selecting for biomass converting to energy and other forms.
서정,이문용,정병훈,송문종,강희신,김정오,Suh, Jeong,Lee, Mun-Yong,Jung, Beong-Hun,Song, Mun-Jong,Kang, Hie-Sin,Kim, Jeong-O 대한용접접합학회 2008 대한용접·접합학회지 Vol.26 No.5
The laser welding of the car body and components has been spread in the automotive industry. The Nd:YAG laser welding system could be used in 3D welding with robot. However, this system cannot efficiently reduce the welding cycle time according to various welding sequences because the robot's moving time is same that of the resistant spot welding system. But the remote welding system with high power $CO_2$ laser and scanner makes it possible welding cycle time much faster than the robot laser welding system. In the $CO_2$ laser remote welding system, laser beam can be rapidly transferred to a workpiece by moving mirrors of scanner system. So, it makes reducing the cycle time of welding process and shaping various welding patterns easily. Therefore, in this paper, the characteristic of weld strength according to patterns of weld bead on $CO_2$ laser welding was investigated. Also, the relationship between shape of weld bead and value of tensile load was studied. Finally, the optimum remote welding condition for car bumper was investigated.
기술현황분석 - 알루미늄 차체부품의 SPR 접합기술 동향
서정,강희신,이문용,조해용,Seo, Jeong,Gang, Hui-Sin,Lee, Mun-Yong,Jo, Hae-Yong 재료연구소 2011 機械와 材料 Vol.23 No.3
자동차 차체 경량화를 위해 알루미늄 스페이스 프레임 구조가 개발되고 있으나, 관재결합이 필요하기 때문에 기존의 저항 점용접이 적용되기 어렵다. 또한, 멤버와 멤버의 연결부에서는 철강재난 고강도 재료의 사용이 요구되므로 이종재료 접합기술이 필요하다. 알루미늄 및 이종재료 접합방법으로는 볼트체결, 클린칭, SPR 접합, 접착재 등이 있으나, SPR 접합은 기계적인 결합방법의 하나로, 일반 리벳공정과는 달리 별도의 홀이 필요없기 때문에 자동화에 용이하며 작업시간도 빠르다. 리벳의 압입 방식으로 판재의 열변형이 거의 없고 친환경적인 공법으로 사용되고 있으며, 소음이 적고, 용접이 불가능한 이종재료의 결합도 가능하다. 무엇보다 자동차 양산용 장비 적용이 용이하기 때문에 기존의 저항 점용접을 대체하기 편리하다. 따라서, 본 글에서는 알루미늄 차체 부품 접합을 위한 SPR 접합공법에 대한 국내외 기술개발 동향을 분석하고, 한국기계연구원에서의 최근 기술개발 내용을 소개하고자 한다.