http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경량차체용 5182-O 및 6K31-T4 알루미늄 합금의 레이저 용접성
윤종원,강준일 동의대학교 산업기술개발연구소 2005 産業技術硏究誌 Vol.19 No.-
차체 경량화를 위해 현재 자동차에 사용되고 있는 강재에 비해 비중이 낮으면서도 유사한 강도를 가지는 5xxx 계열 알루미늄 합금과 6xxx 계열 알루미늄 합금을 선택하여 Nd:YAG 레이저로 용접한 뒤 보호가스 사용여부에 따른 용접부의 기계적 성질 및 액압 성형성을 조사하였다. 5182-O 알루미늄 합금을 보호가스를 사용해 용접한 경우 기계적 성질 및 성형성이 보호가스를 사용하지 않은 경우에 비해 향상되었다. 6K31-T4 알루미늄 합금을 용접한 경우 보호가스 사용유무에 관계없이 균열이 발생하였으며, 용접부에서의 기계적 성질 및 액압성형성은 현저히 저하하였다.
한국어 학습자의 ‘-어 주다’ 보조용언 사용 양상 연구 -어미 결합 분석을 중심으로
윤종원 인문사회 21 2020 인문사회 21 Vol.11 No.4
This paper analyzed the patterns of ending and conjunctive endings combined with ‘-eo juda’ auxiliary verbs in the composition of Korean students. For the large-scale learner corpus, the analysis patterns of final endings, adnominal endings and conjunctive endings were investigated for each level of proficiency. As a result of the analysis, as the level increased, the ratio increased as the use of the adnominal endings increased from intermediate to advanced. On the other hand, the proportion of final endings gradually decreased. The highest frequency of each ending was found to be the final ending ‘-eotgo’, the conjunctive ‘-go’ and the adnominal ending ‘-neun.’ This study is meaningful in that the various ending-combination patterns of auxiliary verbs are different by mastery through large-scale corpus analysis, and it can be used as basic data for the teaching, including the diagnosis and hierarchicalization of the learner’s language ability through future analysis of auxiliary words binding morphemes. 본 연구는 한국어 학습자의 작문 산출에 나타난 ‘-어 주다’ 보조용언과 결합하는 어말 어미와 결합형 어미의 양상에 대해 분석하였다. 대규모 학습자 말뭉치를 대상으로 숙달도별로 종결어미, 관형사형 어미, 연결 어미 각각의 분석 양상을 조사했다. 분석 결과 관형사형 어미의 사용이 중급에서 고급으로 올라갈수록 비율이 증가하였다. 반면에 종결 어미는 점점 그 비율이 감소하였다. 전체 어미별 가장 고빈도 어미는 종결어미 ‘-었다’, 연결 어미는 ‘-고’, 관형사형 어미는 ‘-는’으로 조사됐다. 본 연구는 대규모 말뭉치 분석을 통해 보조용언의 다양한 어미 결합 양상이 숙달도별로 상이하게 나타나며, 향후 보조용언 결합 형태소 분석을 통해 학습자의 언어 능력 진단과 위계화를 포함한 보조용언 교수의 기초 자료로 활용될 수 있다는 데 의의가 있다.
6K21-T4 알루미늄 합금 레이저 용접부의 기계적 성질에 미치는 필러 와이어의 영향
윤종원,강준일 동의대학교 산업기술개발연구소 2006 産業技術硏究誌 Vol.20 No.-
6xxx(Al-Mg-Si) alloy is candidate material for eco-friendly car (lightweight car body structure and panels) due to their good combination of strength and formability. 6K21 aluminum alloy sheet of 1㎜ and 2㎜ thickness were TB(tailored blank) welded using continuous wave Nd:YAG laser with and without 4043 filler wire. The effect of filler wire on the weldability of 6K21 alloy was investigated. The weld metal composition was changed by feeding the 4043 filler wire containing 5wt.% Si. Solidification cracking in the weld metal was substantially reduced when the filler wire was used. Tensile strength and formability of the welds were improved compared to those of welds made without filler wires. It was revealed by EPMA analysis and image mapping that the abundant amount of Al-Si eutectic existed particularly at the interdendritic sites or grain boundaries and thus the eutectic prevented the solidification cracking in the weld metal.
Tophaceous Gout of the Spine Causing Neural Compression
윤종원,박경범,박현,강동호,이철희,황수현,정진명,한종우,박인성 대한척추신경외과학회 2013 Neurospine Vol.10 No.3
Gout is a common metabolic disease in which monosodium urate crystals called tophi develop. Spinal involvement in gout resulting in neural compression is unusual. We describe a case of a 64-year-old man with a history of gouty arthritis of the knee. The patient presented with thoracic myelopathy and radiculopathy. Imaging of the spine revealed an extradural mass lesion with bony erosion of the thoracic spine. A decompressive operation was performed, and a chalky white material was found. Histopathological examination confirmed a gouty tophus. The symptoms of spinal gout vary and its radiological features are not sufficiently specific to provide a definite diagnosis. Therefore, in patients with a history of gouty arthritis who present with neural compressive symptoms of the spine, spinal gout should be strongly suspected.
Aureobasidium pullulaans를 이용한 Maltose로부터 Isomalto-oligosaccharides의 생산
윤종원,노지선송주연송승구 한국생물공학회 1994 KSBB Journal Vol.9 No.2
A Aureobasidium pullulans 균체를 이용하여 malt-ose로부터 isomalto-oligosaccharides를 생산하였다. 저농도의 maltose를 기질로 이용할 경우에는 가수분해활성이 transglucosylation활성보다 매우 강하여 isomalto-oligosaccharides 합성수율이 매우 낮았으나 400g/ P 이상의 고농도기질에서는 isomalto-oligosaccharides 합성이 유리하였다. isomaltomalto-oligosaccharides 생산의 반응 최적조건은 pH 4.5, 온도 $65^{\circ}C$, 균체농도는 기질 그램당 10unit이었다. 이때 생산된 isomaltooligosa-ccharides의 수율은 최고 48.35%였다. 반응초기에 maltose로부터 panose가 선택적으로 생산되었고, maltose가 더 이상 기질로 이용되지 못하는 반응시점에서 panose를 기질로 이용하여 isomaltotriose가 생산되었다. A new method for the production of isomalto-oligosaccharides from maltose was investigated using intact cells of Aureobasidium pullulaans which had been known to produce fructo-oligosaccharides. The cells showed transglucosylation activity producing isomalto-oligosaccharides at high concentrations of maltose, while they showed a hydrolytic activity at low concentrations of substrate when cultivated at $25^{\circ}C$. The optimum reaction conditions for the isomalto-oligosaccharide production were as follows: substrate concentration, 500g/l maltose; pH, 4.5; temperature, $65^{\circ}C$; cell dosage, 10 unit per gram substrate. Under optimized conditions, the maximum yield of isomalto-oligosaccharides achieved was around 48% (w/w). At the early period of reaction, panose was selectively produced from maltose, and thereafter isomaltotriose was synthesized by utilizing panose as a substrate when maltose consumption was discontinued.