http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연료전지 분리판의 리브 높이 변화에 따른 응답성 변화에 관한 실험적 연구
윤성호(Sungho Yun),최남현(Namhyeon Choi),남기훈(Kihoon Nam),이장일(Jangil Lee),최영돈(Youngdon Choi) 대한설비공학회 2012 대한설비공학회 학술발표대회논문집 Vol.2012 No.6
In the present study, using a variation of rib height, the transient response and the performance are investigated. The cell voltage is acquired according to the current density change(0.8A/cm2 to 1.0A/cm2) under same stoichiometry and relative humidity. The different level of undershoots appeared at the different clamping pressure(1.5MPa and 2.0MPa) and different rib height. At 1.5MPa clamping pressure, rib manufactured cutting 100μm height goes to steady state faster than reference plate and has lower maximum undershoot voltage. But performance is lower than reference plate due to increasing contact resistance.
연료전지용 판형 막 가습기의 유동방향에 따른 열 및 물질전달 특성에 관한 해석적 연구
윤성호(Sungho Yun),변재기(Jae Ki Byun),최영돈(Young Don Choi) 대한기계학회 2013 大韓機械學會論文集B Vol.37 No.5
연료전지 시스템에서 공급기체 가습은 연료전지 성능효율과 전해질막 수명 향상 측면에서 중요하다. 판형 막 가습기는 일반적으로 유동 방향에 따라 직교류와 대향류로 구분되고 판과 막 사이에서 고온 다습한 공기와 저온 건조한 공기의 열 및 물질전달이 이루어진다. 본 연구에서는 현열 및 잠열 ε-NTU법을 이용하여 입구 온도와 유량 변화에 따른 열 및 물질전달 성능 변화를 유동 방향에 따라 비교하였다. 이를 통하여 저유량 일 때 대향류는 직교류 보다 열 및 물질전달 성능이 높은 것을 알 수 있었고 유량이 증가함에 따라 성능 차이가 감소되는 것을 확인할 수 있었다. 그리고 입구온도가 증가함에 따라 열전달 성능 변화는 작은 반면 물질전달 성능 변화는 비선형으로 크게 감소되는 결과를 얻었다. The humidifying supply gas is important in terms of the performance efficiency and membrane life improvement of a PEM fuel cell. A planar membrane humidifier is classified as a cross-flow and counter-flow type depending on the flow direction, and heat and mass transfer occur between the plate and the membrane. In this study, the changes in heat and mass transfer for various inlet temperatures and flow rates are compared according to the flow direction by using the sensible and latent ε-NTU method. The obtained results indicate that the counter flow shows higher heat and mass transfer performance than the cross flow at a low flow rate, and the difference in performance decreases as the flow rate increases. Furthermore, changes in the mass transfer performance decrease considerably with a nonlinear increase in the inlet temperature, and variations of the heat transfer performance are small.
금속 적층 제조 기술을 이용하여 열전달 및 구조적 성능을 동시에 향상시킨 레티스 유로에 관한 연구
윤성호(Sungho Yun) 대한설비공학회 2021 대한설비공학회 학술발표대회논문집 Vol.2021 No.6
레티스 유로는 위상최적화된 다양한 레티스 형상의 구조물을 유로에 적용한 것으로 금속 적층 기술의 발달과 함께 열전달 및 구조적 관점에서 다양한 연구들이 수행되고 있다. 본 연구에서는 열-유동-구조 다물리계 해석 모델을 개발하여 레티스 유로의 열전달 및 구조적 특성을 분석하였다. 유로 내부에는 유동의 열전달 현상을 촉진 시키면서 지지구조물이 될 수 있는 face-centered cubic with vertical struts 레티스 형상을 적용하였다. 복합소재 레티스 유로와 W-type functionally graded 레티스 유로를 제안하였고, 체적비율 및 입구 유속 변화에 따른 성능 변화를 분석하였다. 또한, 열-유동 성능 지표와 열-유동-구조 성능 지표를 정의하였고, 이를 이용해 기존 유로들과의 성능을 비교하였다. 연구 결과 열-유동 성능 측면에서는 복합소재 레티스 유로가 우수하였고, 열-유동-구조 성능 측면에서는 W-type functionally graded 레티스 유로가 우수하였다.
윤성호(Sungho Yun),강대훈(Daehoon Kang),김보경(Bo-Kyong Kim),김재원(Jaewon Kim),김길동(Gildong Kim),이현배(Hyunbae Lee),최상열(Sangyeol Choi) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
수소는 그린 뉴딜 국가 정책에 부합하는 에너지원으로 저장·충전·활용 분야에 대한 다양한 연구가 진행되고 있다. 액화수소는 기체수소 대비 밀도가 높고 대용량 적재가 용이하기 때문에 국내에서는 액화수소로 구동되는 기관차를 정부출연연구소를 중심으로 개발하고 있다. 본 연구에서는 액화수소의 충전 및 슬로싱 현상을 분석하기 위한 모델 개발을 수행하였다. Mixture 모델과 VOF 모델을 이용하여 충전 현상을 비교하였다. 해석 결과 VOF 모델의 경우 mixture 모델보다 액화수소의 유동특성 및 증발에 따른 다양한 모멘텀 거동이 잘 구현되는 것을 확인하였다. VOF 모델을 적용한 슬로싱 해석은 액화수소의 낮은 밀도와 점성계수로 인해 급격한 계면 변화가 일어나는 현상이 확인되었다. 본 연구를 기반으로 액화수소 기관차용으로 개발되는 저장탱크의 충전 및 슬로싱 효율을 높일 수 있는 연구를 수행할 예정이다.
태양열 집열기를 이용한 열전발전용 열교환기 성능에 관한 연구
윤성호(Sungho Yun),신현호(Hyun Ho Shin),서호영(Seo Ho Young),이경원(Lee Kyung won),윤정훈(Yoon Jeong Hun),김용찬(Yongchan Kim) 대한설비공학회 2018 대한설비공학회 학술발표대회논문집 Vol.2018 No.11
Thermoelectric power generation is a technology that converts heat energy into electric energy directly, and it is an eco-friendly future power generation system. Therefore, the studies of thermoelectric power generation have been actively conducted as a technology that stands out among the fields of energy harvesting. This study aims to analyze the performance of the thermoelectric power generating heat exchanger with different types of flow channels. A rectangular basic type and a fin type with a strip fin inserted are applied. The results show that the flow is uniformly distributed and the turbulence is increased at the fin type due to the effect of the fin, which improves the power generation and heat transfer performance compared to the basic type. The fin type shows 65.7% higher power generation and 34.4% higher heat rejection than those of the basic type.
축열조를 이용한 공랭식 모듈 칠러 시스템에 관한 해석적 연구
윤성호(Sungho Yun),박성기(Seonggi Park),서형준(Hyungjoon Seo),배동석(Dongseok Bae),강병하(Byung Ha Kang ),김용찬(YongChan Kim) 대한설비공학회 2017 대한설비공학회 학술발표대회논문집 Vol.2017 No.6
The air-cooled module chiller has the advantages of saving energy and space by combining small units into modules. Combining this air-cooled module chiller system with a thermal storage, it is possible to reduce energy costs by using cheap night-time power at night and reduce power consumption during peak load times in summer. This study was conducted to analyze the economic assessment and the LCCP on the absorption chiller system and the air-cooled module chiller system with the thermal energy storage for an office building. The result showed that the total annual cost decreased with the decrease in the storage tank capacity due to the reduced the initial investment cost. In addition, the total CO2 emissions was decreased with the decrease in the storage tank capacity due to the reduced direct emissions from refrigerant leakage.
연료전지용 가습기의 막 종류에 따른 성능 특성에 관한 해석적 연구
윤성호(Sungho Yun),변재기(Jae Ki Byun),최영돈(Young Don Choi),신종근(Jong Keun Shin) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
Humidifying supply gas is important to look at fuel cell performance efficiency and improvement of membrane life from the side in PEMFC. The method of humidifying gas were bubbling, water spray and enthalpy wheel. But these were complex device and difficult to install. Therefore, the study about membrane humidifier that is supplementation these weakness is currently underway. Membrane that is important part in mass transfer of membrane humidifier was used nafion membrane which was used PEMFC. However, nafion is high-priced and low moisture transfer. Therefore, in this study, we carry out the study about evaluated performance of humidifier from ε-NTU method used PDMS membrane and SPEEK membrane for improving moisture transfer. Also, moisture diffusivity variation of PDMS membrane to various effectiveness are investigated.