http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Shadow Mask GRS 공정에서의 반응수율 향상을 위한 기술개발
윤문규(Munkyu Yoon),구기갑(Kee-Kahb Koo),이문용(Moonyong Lee) 한국청정기술학회 2007 청정기술 Vol.13 No.3
급속한 성장에 따른 디스플레이 산업에서의 생산량 증가는 원료 사용의 증가와 배출액의 증가를 야기하고 있으며 이에 따른 폐액 처리양이 증가되어 환경적, 경제적 문제점을 안고 있다. 본 연구에서는 브라운관 소재인 shadow mask의 식각공정 시 사용한 식각용액의 피로도를 감수시키기 위하여 산화반응을 이용하여 신액 사용량과 구액 배출량을 최소화해주는 GRS(Green Recycling System)공정의 수율을 향상시키기 위해 실험실 및 현장적용 실험을 통하여 공정의 최적화를 하기위한 방법을 연구하였다. 공정변수들과 GRS 공정의 수율과의 관계를 규명하였으며 GRS 반응기의 내부구조 개선으로 인해 약 10%의 수율증가를 확인하였으며 공정의 수율 향상과 최적화에 큰 도움이 되었다. In the present study, we developed a methodology to minimize a waste solution produced in the etching process. The condition for the optimization of the GRS process was studied on the basis of laboratory experiment and field test as well as pilot test. Through the study, we analyse the relation of the main process variables and the yield of the GRS process. The application of the new operation condition and the reactor internal modification results in 10% yield improvement in the GRS process and accordingly decreases a wasted solution.
LCD 제조공정에서의 폐용매 분리처리를 위한 공정 설계
윤문규(Munkyu Yoon),이문용(Moonyong Lee) 한국청정기술학회 2008 청정기술 Vol.14 No.4
연구에서는 LCD 제조 공정에서 배출되는 스트리퍼와 디벨로퍼 혼합 폐액(SD폐액)과 스트리퍼 폐수의 효과적 분리 및 처리를 위한 가능한 기술로서 추출공정과 증류공정의 기술적/경제적 타당성을 검토하였다. SD 폐액과 스트리퍼 폐수의 추출분리를 위한 용매로 CHCl₃가 여러 가지 관점에서 가장 적절한 용매로 확인되었다. 또한 SD폐액 분리 회수를 위한 공정으로서 추출공정과 증류공정의 두 가지 공정에 대하여 정밀 전산 모사를 수행한 결과 CHCl₃를 이용한 추출분리공정이 단순종류공정보다 6배 정도 에너지 소요비용이 적게 소요됨을 확인할 수 있었다. In this study, we carry out economic and technical feasibility study for treatment process of waste solvent such as SD waste solution and stripper solution from LCD manufacturing process. Extensive screening work has been done for selecting the best extraction solvent. As a result, it is shown that CHCl₃ is the most adequate extraction solvent for separation and recovery of both SD waste solvent and stripper waste. Rigorous simulation study has been carried out for extraction process and distillation process as a candidate of waste solvent treatment. The result shows that the solvent extraction process is more beneficial than the simple distillation process.
Dynamic Modelling of MCHE for Natural Gas Liquefaction
Chawat Siwaranon,윤문규(Munkyu Yoon),박대유(Deayu Park),염충섭(Choong-Sub Yeom) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.11
Natural gas is in great demand globally as a clean fuel and as a feedstock for petrochemicals, agricultural chemicals and plastics. Traditionally, transport has been limited to pipelines, whose economic and physical limitations have typically restricted distribution to regional/interstate supply, relatively close to the gas source, where terrain and geopolitical considerations are not prohibitive. However, when converted to LNG, the fuel can be conveniently transported by ship to distant markets worldwide-well beyond the reach of pipeline systems, thereby greatly increasing the availability of this highly desirable energy resource with an unparalleled flexibility of supply. When chilled to -162℃ (-260℉) at 1 atm<SUP>(1)</SUP>, natural gas is a clear liquid taking up 600 times less space than the corresponding gas and enabling practical transportation by specially designed ships. Various combinations of refrigeration cycles are used in licensed LNG production processes, but most employ gas turbine-driven compressors to achieve the necessary cryogenic temperatures. For commercial, safety and environmental reasons, these compression units must be very robust, efficient, and highly reliable.