http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
개별진공압공법이 적용된 지반의 최적 단계진공압 산정 및 침하예측
윤명석,안동욱,박재만,김수삼,Yoon, Myung-Seok,Ahn, Dong-Wook,Park, Jea-Man,Kim, Soo-Sam 한국토지주택공사 토지주택연구원 2011 LHI journal of land, housing, and urban affairs Vol.2 No.2
개별진공압공법은 지반에 타설된 연직배수재에 진공압을 직접 가하여 간극수를 배출하여 일정한 전응력 상태에서 유효응력이 증가함에 따라 압밀을 촉진 시키는 공법이다. 연약지반 개량에 일반적으로 사용되는 공법인 성토재하공법(preloading)과는 다르게 성토하중이 필요로 하지 않기 때문에 성토재료의 확보 문제와 지반의 국부적인 전단파괴에 대해 이점을 가지고 있다. 또한 기존의 진공압밀 공법에서의 문제점인 펌프효율의 감소, 고가의 기밀시트에 소요되는 비용, 그리고 기밀시트의 잦은 파손의 문제 등을 직접적으로 배수재에 진공압을 가함으로서 개선시킨 공법이다. 그러나 개별진 공압공법은 직접 고압의 진공압을 직접 배수재에 가함으로써 배수재 주변의 투수계수가 감소하며 경화되는 영역(hardening zone)과 필터재료의 막힘현상(clogging)에 의해서 간극수의 배출이 줄어들게 되어 지반개량의 효율이 크게 감소하게 된다. 따라서 본 연구에서는 높은 지반개량 효과를 얻을 수 있는 진공압의 적용기간을 찾기 위해서 단계진공압(-20, -40, -60, -80KPa) 적용기간을 각각 다르게 적용하였다. 실험을 진행하는 동안 각 조건에 따라 개량 시간에 따른 침하량을 측정하였으며, 실험 종료 후 최종침하량, 함수비, 콘저항치를 측정하였다. 파악된 데이터를 비교/분석하여 개별진공압공법에 적합한 단계진공압 적용기간을 도출한 후 수치해석을 실시하여 제안된 단계진공압 적용에 따른 침하량을 예측하였다. Individual Vacuum Pressure Method (IVPM) is a soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and to strengthen the soft ground. This method does not require surcharge loads, different to embankment or pre-loading method. In this study, the ground improvement efficiency of Individual Vacuum Pressure Method was estimated when suction pressure increases step by step(-20, -40, -60, -80kPa) with different periods. During Individual Vacuum Pressure Method process, surface settlement and pore pressure were monitored, and cone resistance as well as water content were also measured after the completion of Individual Vacuum Pressure Method treatment. From the results, optimum duration of each step of vacuum pressure was determined, and the settlement was calculated using FEM numerical analysis.
이성준 ( Seong-joon Lee ),윤명석 ( Myung-seok Yoon ),강세훈 ( Se-hoon Kang ) 대한화장품학회 1995 대한화장품학회지 Vol.21 No.1
비수유화법을 이용하여 안정하고 미세한 O/W유화물을 제조하였다. 유화제는 Polyoxyethylene(25)octyldodecyl ether, 오일은 유동파라핀, 비수용매는 프로필렌글리콜, 글리세린, PEG400을 사용하였다. 제조된 최종 O/W에멀젼의 안정성은 입자크기분석기를 통하여 각 보관 조건에 따른 경시별 평균 유화입자크기 변화를 측정하였다. 0℃, 25℃, 40℃, cycle, freeze & thaw 모두 1달 이상 230nm의 평균 유화입자크기를 보여 주었다. 인공광, 자연광 노출에 따른 광안정성 실험에서도 모두 입자 크기 변화 없이 안정했다. 또한 비수 용매에서의 계면활성제 거동을 알아보고자 각 용매에 따른 표면장력, 계면장력 및 탁도를 측정한 결과 계면활성제가 물에서 미셀을 형성하는 것과는 달리 비수용매에서는 폴리올의 종류에 따라 용해와 석출 현상이 나타났고 이러한 용해와 석출 현상이 계면활성제의 계면 흡착 효율성에 큰 영향을 미침을 알 수 있었다. A fine oil -in-water (O/W) emulsion using non-aqueous emulsification technique was developed. And the behaviors of POE(25)octyldodecyl ether in non-aqueous polyol/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecy1 ether hardly existed as the micelle in the non-aqueous polyol system while, in water, it formed micelles very easily. So, when a polyol, like glycerine in which POE(25)octyldodecyl ether has a poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25)octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0°C, 25°C, 40°C, 50 °C and freeze-thaw cycle chamber for a month, while a conventional emulsion system was unstable. It is concluded that, by pertinent combination of polyols, we can improve the adsorption efficiency of surfactant.