http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
1:4 전송 선로 트랜스포머를 이용한 고출력 고효율 광대역 전력 증폭기의 설계
김경원(Kyung-Won Kim),서민철(Min-Cheol Seo),조재용(Jae-Yong Cho),유성철(Sung-Cheol Yoo),김민수(Min-Su Kim),김형철(Hyung-Cheol Kim),오준희(Jun-Hee Oh),심재우(Jae-Woo Sim),양영구(Youngoo Yang) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.2
본 논문에서는 부궤환 회로, 푸쉬풀 구조, 광대역 RF choke, 전송 선로 트랜스포머를 이용하여 30~512 ㎒의 초광대역에서 동작하는 100 W 고효율 전력 증폭기를 설계하였다. 출력 전력을 향상시키고자 전송 선로를 이용한 트랜스포머에 병렬로 커패시터를 삽입하여 적절하게 로드 임피던스를 정합하였다. 제작한 광대역 전력 증폭기는 동작 주파수 대역에서 100 W 이상의 출력 전력과 18.34±0.9 ㏈의 높고 고른 이득 특성을 보였다. one-tone 측정에서 2차 고조파는 -34 dBc 이하, 3차 고조파는 -12 ㏈c 이하의 선형성 특성을 보였으며, 출력 전력 100 W에서 약 40 % 이상의 고효율 특성을 보였다. This paper presents a design of a 100 W high-efficiency power amplifier, whose operational frequency band expands from 30 to 512 ㎒, using negative feedback network, push-pull structure, broadband RF choke, and transmission line transformer for balun configuration. The push-pull amplifier has been tuned for higher output power using a shunt capacitor as a matching component at its load especially for high-frequency region. The implemented power amplifier exhibited a very flat power gain of 18.34±0.9 ㏈ throughout the operating frequency band and very high power-added efficiency(PAE) of greater than 40 % at an output power of 100 W. It also showed second- and third-harmonic distortion levels of below -34 dBc and -12 ㏈c, respectively, through the entire operating frequency band.
변형속도를 고려한 Al/PC 접착제 접합부의 강도평가에 관한 연구
임재규(Jae-Kyoo Lim),윤호철(Ho-Cheol Yoon),유성철(Sung-Chol Yoo),서도원(Do-Won Seo),전양배(Yang-Bae Jeon) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.8
Adhesive bond joints are available for structural applications as understanding of adhesive bonding which has been improved. After adhesive materials are decided, the design of adhesive bonding joints is mainly focused on shape, dimension and surface treatment of joints. ill the design of single-lap joints lap length, thickness of adherend materials and surface treatment should be decided, these parameters have an main influence on strength of adhesive bonding joints. This study explains that surface treatment affects strength of Al/Polymer single-lap joints and loading speed affects adhesive strength design.