http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SnO₂:La 박막을 이용한 가스센서의 물리적 특성에 관한 연구
우종철 ( Jong Chul Woo ),김성화 ( Sung Hwa Kim ),김영국 ( Young Kook Kim ) 경남대학교 기초과학연구소 2013 기초과학지 Vol.30 No.-
스프레이 열소성법을 이용하여 ITO-SnO₂:La 박막을 제작하여 CO₂가스에 대한 반응을 측정하여 CO₂가스감지 센서로서의 타당성을 알아보았다, 제작한 ITO-SnO₂:La 박막은 430 nm~780 nm의 파장 영역에서 평균 80%의 광투과율을 보였으며, CO₂가스의 양이 증가할수록 전기저항의 변화율이 증가함으로 전기전도도의 변화량, 반응감도 및 반응율의 증가를 보였다. 이 결과로 ITO-SnO₂:La 박막은 CO₂가스 감지 센서로서 적절한 특성을 가져음을 알 수 있었다. Highly sensitive La doped with SnO₂:La thin flilm sensors for CO₂gas were jabricated, For the sensore we used well-known spray pyrolysis method techmological route with SnO₂,LaCI₃, C₂H5OH, H₂O as host and dopant matetias The sensors had a maximum sensitivity at sprating temperature of 550°C. These sensors improved sevsitivity, response and, recovery time, reaction rate and sravility, as compared to another sensors, The good Iimeatity of sensitivity as a flunction the gas concentration exhibited the possibiIity to be used for concentration meter.
ITO-SnO2:La 가스센서의 물리적 특성에 관한 연구
우종철 ( Jong Chul Woo ),김영국 ( Young Kook Kim ),김성화 ( Sung Hwa Kim ) 경남대학교 기초과학연구소 2015 기초과학지 Vol.32 No.-
Highly sensitive La doped with ITO-SnO2:La thin film sensors for CO2 gas were fabricated. For the sensors, we used the well-known spray pyrolysis method technological route with SnO2, LaCl2, C2H5OH, H2O as the host and dopant materials. The sensors had a maximum sensitivity for spraying at 550℃. Compared to other sensors, our sensors improved sensitivity, response, recovery time, reaction rate and stability. A good linearity of sensitivity as a function of gas concentration exhibited the possibility of concentration meter use.
BaSO4:Dy 열형광체의 활성제 농도와 냉각과정에 따른 발광특성에 관한 연구
우종철 ( Jong Chul Woo ),김영국 ( Young Kook Kim ),김성화 ( Sung Hwa Kim ) 경남대학교 기초과학연구소 2014 기초과학지 Vol.31 No.-
본 연구는 활성제 Dy를 0.1 ~ 0.4 wt.% 비율로 첨가한 BaSO4을 2시간 동안 800℃의 아르곤 가스에서 소결 하였다. 그 후 열 발광 다른 냉각 조건 및 분쇄 공정으로 제조하였다. 저에너지 X-선에 노출한 후 가온 율 10 ℃/sec 의 열을 가하여 얻은 glow곡선으로부터 활성제 농도와 열형광강도의 관계, 최적의 활성화조건, 열형광체의 물리적 특성 등을 조사하였고, 그 결과 높은 활성제 농도에서는 냉각시간의 증가함에 따라 열 형광강도의 차이는 크게 나타나지 않았다. 소결 중간 과정에서 분쇄과정을 포함시킨 결과, glow곡선의 모 양이 간결하고 부드럽게 나타났다. 본 연구를 통해 제작된 TLD는 저에너지 방사선 물질을 검출과 자연 방 사선 검출기로서 사용될 수 가능성이 있을 것으로 보인다. 또한 비용 효율적인 시간 절약 혜택입니다. BaSO4 added by activator Dy at the ratio of 0.1~0.4wt.% ratio, was sintered in Argon gas of 800 for 2 hours. After that Thermoluminescent has been made in different cooling condition and crush process. And the heat produced by low-energy fluorescent X-ray to exposure the relationship of the active agent concentration and the fluorescence intensity from the column as measured by a heating rate of 10℃/sec glow curve, the optimal activation condition, was obtained and physical properties of the phosphor. Relative thermoluminescent(TL) intensity increased with cooling rate, while at high activator concentration there was little change in the shape of glow curve and peak temperature due to cooling rate change. Results included the grinding process in the sintering intermediate course, was to change the shape of the glow curve was simple-smooth. The TLD manufactured in this study can be used as detecting material of low energy radiation and further as nature radiation detector. It is also cost-effective with time-save benefit.
ITO-SnO2:F 박막을 이용한 가스센서의 물리적 특성에 관한 연구
우종철 ( Jong Chul Woo ),김성화 ( Sung Hwa Kim ),김영국 ( Young Kook Kim ) 경남대학교 기초과학연구소 2014 기초과학지 Vol.31 No.-
ITO 박막에 SnCl2.2H2O, NH4F, C2H5OH, H2O를 주물질과 첨가제로 사용하여 스프레이열소성법으로 F를 첨가한 고감도 ITO-SnO2:F 박막 CO2 가스센서를 제작하였다. 제작한 센서는 분무 온도가 550℃ 일 때 최 대 감도를 나타내었고, CO2 가스의 양이 증가할수록 전기저항의 변화율이 증가함으로 전기전도도의 변화 량, 반응감도 및 반응율의 증가를 보였다. 이 결과로 ITO-SnO2:F 박막은 CO2 가스감지 센서로서 적절한 특 성을 가졌음을 알 수 있었다. Highly sensitive F doped with ITO-SnO2:F thin film sensors for CO2 gas were fabricated. For the sensors we used well-known spray pyrolysis method technological route with SnCl2;2H2O, NH4F, C2H5OH, H2O as host and dopant materials. The sensors had a maximum sensitivity at spraying temperature of 550℃. These sensors improved sensitivity, response and, recovery time, reaction rate and stability, as compared to another sensors. The good linearity of sensitivity as a function of the gas concentration exhibited the possibility to be used for concentration meter.
SrSo₄ 열형광체의 용매제 및 활성제 첨가에 따른 발광 특성에 관한 연구
김성화 ( Sung Haw Kim ),우종철 ( Jong Chul Woo ),김영국 ( Young Kook Kim ) 경남대학교 기초과학연구소 2013 기초과학지 Vol.30 No.-
본 연구에서는 SrSo₄ 열형광체에 란탄계 화합물인 Ce를 첨가하는 과정에서 용매제로서 황산1%와 물을 사용하여 건조 후 일정온도에서의 소성한 후 제작하였다, 활성제의 종류에 관계없이 othornombic구조를 일루고 있었다, 제작한 열형광체에 저에너지 X-ray를 조사하여 가온율 10%/sec로 측정한 글로 곡선으로부터 용매제에 따른 발광 특성과의 관계, 최적의 활성화조건 및 열형광체의 물리적 특성 등을 알아보았다. 소성 온도는 800 °C이며, 모체인 SrSo₄자체와 활성제첨가에 따른 발광 특성의 변화를 보였으며, 각각의 피크의 온도는 일정하게 나타났다. 따라서 본 연구에서 사용된 SrSo₄ 열형광물질의 제작에 있어 기초적 자료가 될 것이라고 본다 In this study, lanthanide phosphors SrSo₄ heat Ce compound is added in the course of 1% sulfuric acid as solvent, and water and then dried using a constant temperature after the flring was prepared, Regardless of the type of activator to achieve the structure was othornombic. Heat produced by the low-energy fluorescent X-ray is irradiated the heating rate 10°C/sec as measured according to the second solvent from the glow curve, the relationship between the luminescence properties, optimum physical properties ofthe phosphor, and thermal activation conditions and evaluated.