국내 건설회사의 지속가능성장률 분석을 통한 건설 산업 특성에 관한 연구 - Higgins모형과 Babcock모형을 중심으로 -

안형준,최청균,김주형,김재준,Ahn, Hyoung-Jun,Choi, Chung-Kyun,Kim, Ju-Hyung,Kim, Jae-Jun 대한건축학회 2011 대한건축학회논문집 Vol.27 No.5

The Ministry of Construction and Transportation announced the Earned Value Management Since the global financial crisis caused by US sub-prime mortgage turmoil in Sep. 2008, construction industry is under serious difficulties in the management at present about two years to the financial crisis, which are matured PF(Project Financing) loans and at least 50 trillion won of locked up funds by unsold houses, due to the industrial characteristic declining more rapidly than other industries in recession. For this difficulty shown in construction industry, it established the causes not only the depression in construction market overtaken followed by the global financial crisis but also the business strategy of local construction companies excessively weighted towards external growth. In today's rapidly changing society, such business strategy overly focused on growth only may threaten even the corporate sustainability. Therefore, local construction companies must meet the changes in customer demands and the market and they must focus on the establishment of efficient strategies through the corporate strategic management at the same time. Based on this background, this study analyzed the sustainable growth rate with accounting information of 70 construction companies listed to the market of Korea Stock Exchange during the period from 2005 to 2009 and then analyzed the characteristics shown in those companies classified into the good company group and the bad company group for the corporate activity of construction companies by which the reasonable growth can be maintained while the growth-oriented strategy is still valid.

Lip-Type 모듈형 SC보의 휨내력에 관한 실험적 연구

안형준,신일균,류수현,Ahn, Hyung Joon,Shin, Il Kyoun,Ryu, Soo Hyun 한국강구조학회 2006 韓國鋼構造學會 論文集 Vol.18 No.2

본 논문은 기존의 철근콘크리트의 단점을 개선한 Lip형 모듈단면 MSC보의 휨거동에 대하여 실험값과 이론값을 비교 분석하여 MSC보의 적용에 대한 기초적인자료를 제시하고자하였다. 기존의 SC보는 제작과정에서 절단 및 용접 등 많은 노동력을 필요로 하지만 MSC보는 박판강재를 측면모듈과 하부모듈의 2가지 형태로 모듈화 하여 필요한 크기의 SC보를 손쉽게 제작할 수 있는 프리패브의 개념을 도입하였다. 실험결과 모듈간의 결합방법 및 콘크리트와의 합성방법에 개선이 필요성이 나타났으며 추후 연구를 통해 모듈간의 결합력강화 및 강재와 콘크리트의 합성율을 높인다면 새로운 구조부재로 사용이 가능하다고 판단된다. In this paper, the basic data regarding the application of the MSC (Modular Steel Concrete) beam are presented by comparing the experimental value with the theoretical value, focusing on the bending behavior of the Lip-type MSC beam, which is composed of steel and concrete. Considerable manpower is needed to fabricate the traditional MSC beam, particularly for the tasks of cutting, welding, etc. Because much time is needed to fabricate the traditional SC beam, the prefabrication concept is introduced, easily produce the required size of the SC beam by prefabricating the side module and the lower module, which is made up of a steel sheet. The result indicates that the method of uniting the modules, an d the composition method with concrete, should be improved. The proposed MSC beam can be used as a new structural member by increasing its coherent reinforcement with modules and the composition ratio of steel and concrete through a future study.

삼차신경중간핵에서 저역치기계자극수용기 유래 들신경섬유 종말의 연접양상

안형준,백상규,배용철,최종훈,김종열,Ahn, Hyoung-Joon,Paik, Sang-Kyoo,Bae, Yong-Chul,Choi, Jong-Hoon,Kim, Chong-Youl 대한안면통증구강내과학회 2005 Journal of Oral Medicine and Pain Vol.30 No.1

In order to evaluate the mechanism of transmission as well as processing of sensory information originating from low-threshold mechanoreceptor in oral and maxillofacial region at primary synaptic region of trigeminal nervous system, vibrissa afferent fibers of adult cat were labeled with intra-axonal HRP injection. Serial sections containing labeled boutons were obtained from the piece of trigeminal interpolar nucleus. Under electron microscope, total 30 labeled boutons were observed, and ultrastructural characteristics, frequency of occurence, synaptic organizations of vibrissa afferent terminals were analysed. The results were as follows: 1. Labeled boutons contained clear, spherical synaptic vesicles with diameter of 45$\sim$55nm. They formed asymmetrical synapse with dendrites showing definite postsynaptic density, larger synaptic cleft, multiple synaptic structures at various regions. With unlabeled axon terminals(p-ending) containing polymorphic synaptic vesicles, they formed symmetrical synapse showing indefinite postsynaptic density and narrower synaptic area. 2. Each labeled bouton formed 1 to 15 synapses, the average of 4.77$\pm$3.37 contacts per labeled bouton, with adjacent neuronal profiles. Relatively complex synaptic organization, which formed synapses with more than 5 neuronal profiles, was observed in a large number(46.7%, n=14) of labeled boutons. 3. Axo-somatic synapse was not observed. The number of axo-dendritic synapse was 1.83$\pm$1.37 per labeled bouton. Majority(85.0%) of axo-dendritic synapses were formed with dendritic shafts, nonprimary dendrites(n=47, 1.57$\pm$1.38/1 bouton), however, synapses formed with primary dendrites(n=6, 0.20$\pm$0.41/1 bouton) or dendritic spines(n=2, 0.07$\pm$0.25/1 bouton) were rare. 4. 76.7%(n=23) of labeled boutons formed axo-axonic synapse (2.93$\pm$2.36/1 bouton) with p-endings containing pleomorphic vesicles. Synaptic triad, in which p-endings formed synapses with labeled boutons and dendrites adjacent to the labeled boutons simultaneoulsy, were also observed in 60.0%(n=18) of labeled boutons. From the above results, vibrissa afferent terminals of adult cat showed distinctive synaptic organization in the trigeminal interpolar nucleus, thus, suggests their correlation with the function of the trigeminal interpolaris nucleus, which participates in processing of complex sensory information such as two-point discrimination and motivational-affective action. Further studies on physiologic functions such as quantitative analysis on ultrastructures of afferent terminals and nerve transmitters participating in presynaptic inhibition are required.

치주질환의 진행정도에 따른 치태세균의 형태적 분석에 관한 연구

안형준,이만섭,권영혁,Ahn, Hyung-Joon,Lee, Man-Sup,Kwon, Young-Kyuk 대한치주과학회 1986 Journal of Periodontal & Implant Science Vol.16 No.1

Ad Hoc한 대화 정책을 지원하는 멀티 에이전트 플랫폼에 관한 연구

안형준,Ahn, Hyung-Jun 한국정보처리학회 2004 정보처리학회논문지D Vol.11 No.5

Multi-agent systems have been developed for supporting intelligent collaboration of distributed and independent software entities and are be-ing widely used for various applications. For the collaboration among agents, conversation policies (or interaction protocols) mutually agreed by agents are used. In today's dynamic electronic market environment, there can be frequent changes in conversation policies induced by the changes in transaction methods in the market, and thus, the importance of ad hoc conversation policies is increasing. In existing agent platforms, they allow the use of only several standard or fixed conversation policies, which requires inevitable re implementation for ad hoc conversation policies and leads to inefficiency and intricacy. This paper designs an agent platform that supports ad hoc conversation policies and presents the prototype implementation. The suggested system includes an exchangeable and interpretable conversation policy model, a meta conversation procedure for exchanging new conversation policies, and a mechanism for performing actual transactions with exchanged conversation policies in run time in an adaptive way. 멀티 에이전트 시스템은 분산 환경에서 독립된 소프트웨어 개체들의 지능형 협력 작업을 지원하기 위해 개발되었으며 많은 응용 환경에서 사용되어지고 있다. 멀티 에이전트 시스템의 협력을 위해서는 에이전트간에 미리 협의된 형태의 프로토콜인 대화 정책(Conversation Policy; Interaction Protocol)이 사용된다. 현재의 동적인 인터넷 전자시장 환경에서는 거래의 형태가 변화함에 따라 대화 정책이 자주 바뀔 수 있으며 따라서 Ad Hoc한 형태의 대화 정책의 중요성이 커지고 있다. 기존의 에이전트 플랫폼은 몇 개의 표준 혹은 미리 정해진 대화 정책만을 허용함으로써 Ad Hoc한 대화 정책에 대해서는 에이전트 시스템을 일부 새로 구현해주어야 하는 번거로움과 비효율성이 존재한다. 본 연구에서는 그러한 Ad Hoc한 대화 정책을 지원하는 에이전트 플랫폼을 설계하며 그 프로토타입 시스템을 제시한다. 제시된 시스템은 교환 및 해석을 위한 대화 정책 모델, 새로운 대화 정책을 처리하기 위한 메타 대화 처리 부분, 그리고 대화 정책을 런타임시에 교환하고 해석하여 실제 에이전트들이 적응성 있는 상거래 및 협력을 할 수 있도록 하는 메커니즘을 포함한다.

백혈병 환자의 구강악안면 증상 발현에 관한 증례보고 (Oral Chronic GVHD)

안형준,권병기,신경진,최종훈,김종열,Ahn, Hyoung-Joon,Kwon, Byung-Ki,Shin, Kyoung-Jin,Choi, Jong-Hoon,Kim, Chong-Youl 대한안면통증구강내과학회 2000 Journal of Oral Medicine and Pain Vol.25 No.2

Subsequent to an allogenic stem cell transplantation(ASCT) on patients with hematologic malignancy(AML, ALL, CML, multiple myeloma, lymphoma etc.), chronic GVHD(graft versus host disease), which is an immunological reaction, occurs. With treatment results from patients who were diagnosed with ALL(acute lymphocytic leukemia), undergone BMT(bone marrow transplantation) and showed oral and skin lesions due to GVHD, treatment of oral manifestations of leukemia and its general management were studied. 90% of patients with chronic GVHD show change in the oral mucosa causing oral manifestations such as leukoplakia, lichenoid change of the oral mucosa, mucosal atrophy, erythema, ulceration and xerostomia. In treating GVHD, extensive systemic immunosuppression cause bacterial, viral, fungal infection that are fatal, and even if the treatment is successful, the patient is already in a severe immunosuppressed state. Therefore, localized target therapy is preferred. In another words, topical application(rinse, cream, ointment etc.) of cyclosporin and steroid in treating oral chronic GVHD is highly recommended, and the use of PUVA(Psoralen Ultraviolet A) and thalidomide is reported to be effective. In treating such diseases, dental treatment to control pain and prevent secondary infection of oral manifestations is very important. To those patients with systemic diseases who show limited effect by general dental treatment, non-invasive treatment such as the dental laser, in addition to the use of drugs, may be necessary to actively treat pain and help the healing process. For greater results, new effective methods are to be developed for treatment.

증령적 변화로서의 두개골 봉합의 유합 상태

안형준,신경진,권정승,도형주,최종훈,김종열,Ahn, Hyoung-Joon,Sin, Kyoung-Jin,Kwon, Jeong-Seung,Do, Hyung-Joo,Choi, Jong-Hoon,Kim, Chong-Youl 대한안면통증구강내과학회 2001 Journal of Oral Medicine and Pain Vol.26 No.4

In order to study the closure stage of cranial sutures and its correlations with age, the ectocranial closure stage of coronal suture, sagittal suture, and lambdoidal suture of 67 skulls was measured. Among the skulls kept at the department of anatomy, college of medicine, Yonsei University, the ones with ages identified were used for this study. These measurements of suture closure were conducted by 4 examiners independently. The sutures were further divided by Frederic's method into 16 suture parts. The closure stages were classified by five stages of Broca-Ribbe. The following results were obtained: 1. The inter-observer reliability among 4 examiners showed high intraclass correlation coefficient of over 0.75(mean : 0.856) in all suture parts. Therefore, the determination of closure stage wasn't influenced by the subjective view of each examiner. 2. In all suture parts, the closure stage increased proportionally with age.(p<0.01) In terms of each suture part, the S2 part of sagittal suture showed the highest correlation(68.1%) while the L1-R part of lambdoidal suture showed the lowest correlation(51.3%). In addition, in terms of suture types, the correlation with age decreased in the order of sagittal suture(60.0%), coronal suture(57.7%), and lambdoidal suture (55.7%). In general, the average value of suture closure stages had 57.8% correlation with age(p<0.01). 3. The most frequent suture closure stage according to age group was '0' for ages below 30, '0' and '1' for ages within the 30's, '1' and '2' for ages within the 40's, and '2' for ages within the 50's. With older age groups, the frequency of '3' and '4' increased, and the suture closure stage increased proportionally with age. 4. The mean age by closure stage of each suture were within the 40's for the closure stage of '1', within the 50's for the closure stage of '2', and from 50's through 60's for the closure stage of '3'. The standard deviation was over 10 for all closure stages. In addition, at the same suture closure stage, the mean age according to the coronal suture was higher than the ages according to the sagittal suture or lambdoidal suture. Especially, C1-R, C1-L, C2-R, and C2-L parts showed the highest age when at the same suture closure stage. 5. The values appropriate for age estimations using suture closure stages of 16 suture parts were calculated, and a calculator for age estimation ($R^2=0.6944$, p<0.01) by ectocranial suture closure stage for Koreans is presented. From the above results, the method of using the closure stage of sutures of the skull to estimate age can be useful in individual identification of forensic science. Further extensive and accurate research using larger samples would be worthy of study.

방사선 투시를 이용한 개폐구 운동에 따른 수직 고경 계측점의 안정성에 관한 연구

안형준,김창회,김영수,김용호,Ahn, Hyung-Jun,Kim, Chang-Whe,Kim, Yung-Soo,Kim, Yong-Ho 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.4

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.

T형 모듈단면 합성 프로파일보의 거동에 관한 실험적 연구

안형준,이성원,류수현,Ahn, Hyung Joon,Lee, Seong Won,Ryu, Soo Hyun 한국강구조학회 2008 韓國鋼構造學會 論文集 Vol.20 No.4

본 연구는 기존에 발표한 T형 모듈단면 프로파일보의 적용가능성을 확인하기 위해 실험체를 제작하고 전단보강 유무에 따른 휨 및 전단거동을 측정하여 그 결과를 소성이론식과 비교 분석하였다. 모듈단면 프로파일보는 프로파일이 거푸집기능에 추가하여 휨 및 전단저항성능에 기여하고 모듈개념을 통해 성형성능을 향상시킨다. 실험결과 전단보강을 실시한 TS계열 실험체가 전단보강이 없는 T계열 실험체에 비해 우수한 휨저항 능력을 나타내 사용된 전단보강재는 적절하게 전단력을 분담하고 있는 것으로 파악되었으나 T1-1실험체를 제외한 모든 실험체에서 볼트의 전단파괴에 의한 모듈간 슬립현상이 발생되어 휨저항 성능이 충분히 발휘되지 못한 것으로 판단된다. 추후 전단연결재를 변수로 한 T형 모듈단면 프로파일보에 관한 연구를 통해 적절한 모듈간 접합방법이 연구 되어져야 할 것으로 판단된다. This study aims to determine the applicability of the previously published T-type modular profile beam in the manner of producing specimens designed specially for the said purpose, determining their bending and shear behaviors depending on the presence of shear reinforcement, and analyzing the results in comparison with the theoretical equation of plastic deformation. The modular profile beam contributes to bending and shear resistance with the addition of the profile to the form function, and enhances the molding performance through the modular concept. The experimental results showed that the TS series specimens with shear reinforcement have bending behaviors superior to those of the T series specimens without shear reinforcement, which suggests that the used shear reinforcement appropriately bears the shear force. However, it was considered that all the specimens except for the T1-1 specimen failed to have adequate bending performance because of the intermodular slipping caused by the shear failure of the bolts. It is expected that further studies on the T-type modular profile beam, in which shear connectors will be considered as a variable,be performed to develop optimal intermodular connection methods.

인터넷 상점에서의 내용기반 추천을 위한 상품 및 고객의 자질 추출 성능 비교

안형준,김종우,Ahn Hyung-Jun,Kim Jong-Woo 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.2

인터넷 쇼핑몰에서의 상품 추천을 위해 널리 사용되는 방식 중 한 가지는 상품의 특성과 고객의 특성을 비교하여 고객에 맞는 상품을 추천하는 방식이다. 이 방식은 상품이나 고객의 특성을 표현하는 자질(Feature)의 개수가 많을수록 그 중에 어떤 자질을 선택해야 더 좋은 추천 성과를 가져올 수 있는지 파악해 내는 것이 추천의 효과 및 효율성 측면에서 중요하지만 아직까지 충분히 연구되지 않은 실정이다. 본 연구에서는 인터넷 서점에서의 가상 구매실험을 바탕으로 사용자가 구매한 책 들에서 사용자를 잘 나타낼 수 있는 자질을 선택하는 방식에 대해서 벡터 스페이스 모형, TFIDF(Term Frequency-Inverse Document Frequency), Mutual Information, SVD(Singular Value Decomposition) 방식 등을 활용하여 실험하고 그 결과를 비교해본다. 실험 결과 SVD를 응용한 자질 추출 기법이 가장 좋은 성능을 나타내었다. One of the widely used methods for product recommendation in Internet storefronts is matching product features against target customer profiles. When using this method, it's very important to choose a suitable subset of features for recommendation efficiency and performance, which, however, has not been rigorously researched so far. In this paper, we utilize a dataset collected from a virtual shopping experiment in a Korean Internet book shopping mall to compare several popular methods from other disciplines for selecting features for product recommendation: the vector-space model, TFIDF(Term Frequency-Inverse Document Frequency), the mutual information method, and the singular value decomposition(SVD). The application of SVD showed the best performance in the analysis results.