http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고출력 전자기파 발생 장치용 소형화 된 원뿔 계단형 COBRA
안지환(Jihwan Ahn),이상흔(Sang Heun Lee),윤영중(Young Joong Yoon),김준연(Junyeon Kim),이우상(Woo Sang Lee),소준호(Joonho So),한인희(In Hee Han) 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.9
본 논문에서는 고출력 전자기파 발생 장치에 사용될 소형화 된 원뿔 계단형 COBRA(Coaxial Beam-Rotating Antenna)를 제안하였다. COBRA는 혼 안테나와 렌즈로 구성되는데, 일반적인 방법으로 설계할 경우 정전 파괴방지를 위해 그 크기가 매우 커지게 된다. 소형화를 위해 안테나의 길이만 줄일 경우 위상 오류의 증가로 인해 안테나의 이득이 줄어들게 되는데, 이를 방지하기 위해 COBRA 렌즈를 원뿔 계단형으로 변형시켜 개구면에서의 위상 오류가 보정되도록 하였다. 시뮬레이션 결과, 1,300 ㎜ 길이의 안테나를 600 ㎜로 줄였음에도 불구하고 제안된 안테나는 더 높은 이득을 보였으며, 제작하고 측정된 원뿔 계단형 COBRA의 이득은 26.2 ㏈i로 나타났다. In this paper, miniaturized conically stepped COBRA is proposed. In order to prevent electrical breakdown, COBRA, which consists of horn and lens, has to get bigger if it is designed with conventional method. Because of the phase error increase, shortening the length of the antenna without changing the aperture size leads to the reduction of the antenna gain. To avoid this, the phase error at the aperture is compensated by transforming the COBRA lens into conically stepped form. The simulations result shows that the proposed antenna has higher gain than the conventional COBRA in spite of the size reduction from 1,300 mm to 600 mm. The fabricated and measured COBRA has the gain of 26.2 ㏈i.
인공 자기 도체 편파 변환기를 이용한 원형 편파 안테나
장기훈(Kihun Chang),안지환(Jihwan Ahn),윤영중(Young Joong Yoon) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.5
인공 자기 도체 편파 변환기를 이용한 원형 편파 안테나를 소개하고 특성을 분석한다. 기존 원형 편파 안테나들의 한계였던 얇은 구조의 광대역 축비 대역폭을 구현할 수 있음을 인공 자기 도체 이론에 근거하여 이론적으로 설명하고 실험적으로 검증한다. 기존의 안테나들은 방사체 표면 전류에 의해 원형 편파 특성이 구현됨에 따라 축비 대역폭이 방사체 구조에 의존적이었던 반면, 제안된 구조는 선형 편파 다이폴 안테나를 사용하면서 접지면의 격자 구조를 통해 원형 편파 특성을 구현하였다. 이러한 인공 자기 도체 편파 변환기는 접지면에 전기적으로 인접한 다이폴 안테나가 효율적으로 방사할 수 있도록 도와줄 뿐 아니라, 표면 격자의 기하 구조에 따라 축비 대역폭을 조절할 수 있다는 장점을 동시에 가진다. 인공 자기 도체 편파 변환기를 통해 발생된 원형 편파의 축비 특성을 이론적으로 분석하고, 임피던스 정합 특성, 원형 편파 방사 패턴 및 축비 패턴, 축비 대역폭, 격리도 등을 측정하여 논의한다. A new type of circularly polarized(CP) antenna that is characterized by having both low-profile and greater axialratio bandwidth(ARBW) beyond existing antennas is introduced through analysis of artificial magnetic conductor(AMC) polarizer, and experimentally demonstrated. Although it is made use of a linear-polarized dipole antenna with close proximity to ground plane, it is backed by AMC polarizer so as to efficiently radiate with circularly changed polarization whose ARBW is determined by the texture geometry, whereas existing antennas exhibit CP surface-current on radiators, which limit ARBW. The mechanism of the polarization conversion is theoretically analyzed for ARBW, and the experimental properties including the impedance matching, CP radiation pattern, axial-ratio pattern, ARBW, and two-port isolation are discussed.
상호작용하는 SNG-Air 희박 예혼합 비대칭 화염의 소화 특성
강연세(Yeonse Kang),안지환(Jihwan Ahn),심근선(Keunseon Sim),이기만(Keeman Lee) 한국연소학회 2020 한국연소학회지 Vol.25 No.4
Experimental and numerical studies were conducted to clarify the extinction mechanism in mutually interacting SNG (synthetic natural gas) - air premixed asymmetric counter-flow flames. The detailed kinetic mechanism of UC San Diego with which the priority of predicting measured extinction boundaries was validated was adopted to analyze various aspects via up and downstream interactions on extinction boundaries in the flame stability map. The flame stability map was presented with a functional dependency on methane mole fractions in the cold stream ejecting from upper and lower nozzles by varying the global strain rate. Increasing global strain rate lead gradually slanted and configuring of island flammable region and finally only one flammable condition at 740 s<SUP>-1</SUP> through the shrinkage of flammable region. The interacting lean-lean asymmetric flames of extinction boundaries have flame speed of positive (negative) depending on the deviation of methane mole fraction for two reactants. The extinction mechanism of those flames was explained and discussed by emphasizing important role of downstream chemical interaction (via H and CO) and upstream thermal interaction (via conductive heat loss from stronger flame to unburned mixture).
인공 자기 도체를 이용한 기지국 안테나의 방사 특성 개선 및 두께 감소
손철홍(Cheolhong Son),안지환(Jihwan Ahn),장기훈(Kihun Chang),윤지환(Ji Hwan Yoon),윤영중(Young Joong Yoon) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.12
본 논문에서는 도체 판 대신 인공 자기 도체를 반사판으로 이용하여 방사 특성이 개선되고 두께를 줄인 PCS용 기지국 안테나 구조를 제안하였다. 반사판으로 도체 판을 사용하는 기존 기지국 안테나의 경우, 도체 판 끝부분에서 기생 방사가 발생하고 이는 안테나의 후방사를 증가시켜 기지국 안테나의 방사 특성을 악화시킨다. 하지만 인공 자기 도체를 사용하면 표면에서의 높은 임피던스에 의해 표면파가 억압되어 후방사를 크게 줄일 수 있다. 그리고 부엽 특성도 개선되어 서비스 지역이 겹치는 문제를 막을 수 있다. 뿐만 아니라, 인공 자기 도체표면에서의 0° 반사 위상에 의해 기지국 안테나의 두께를 또한 줄일 수 있다. In this paper, a Base Station Antenna(BSA) utilizing Artificial Magnetic Conductor(AMC) as reflector instead of common conductive plate to improve radiation characteristics and achieve low-profile is proposed. In the case of the conventional BSA on conductive surface which acts as a reflector, a secondary radiation is caused at the corner of the conductive surface, and it increases the back-lobe of the antenna, resulting in deteriorating the radiation characteristic of the conventional BSA. However, using the AMC, the back-lobe of the BSA can be largely reduced by the surface wave suppression. And the Side-Lobe Level(SLL) is also improved, resulting in preventing the service area overlapped. Furthermore, due to the 0° reflection phase on AMC, the profile of the BSA can be also reduced.