http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심재호(Jae Ho Sim),김효진(Hyojin Kim),김도진(Dojin Kim),임영언(Young Eon Ihm),윤순길(Soon Kil Yoon),김현중(Hyun Jung Kim),주웅길(Woong Kil Choo) 한국자기학회 2005 韓國磁氣學會誌 Vol.15 No.3
We have investigated the effects of Al codoping on the structural, electrical transport, and magnetic properties of oxide diluted magnetic semiconductor Zn_(1-x)Cr_xO thin films prepared by reactive sputtering. Nondoped Zn_(0.99)Cr_(0.01)O thin films show semiconducting transport behavior and weak ferromagnetic characteristic. The Al doping increases the carrier concentration and results in an decrease of resistivity and metal-insulator transition behavior. With increasing carrier concentration, the magnetic properties drastically change, exhibiting a remarkable increase of the saturation magnetization. These results show carrier-enhanced ferromagnetic order in Cr-doped ZnO.
L-Lactide 폴리머의 내열성 향상을 위한 핵제의 효과 연구
심재호(Sim, Jae-Ho),김수종(Kim, Soo-Jong),심재훈(Shim, Jae-Hoon) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.11
본 논문은 poly(lactic acid)의 내열성을 향상시키기 위한 결정화 핵제의 검토 및 연구에 대한 것이다. 네 종 류의 미세분말 핵제인 금속염 2,2'-methylene bis(4,6-di-tert-butylphenol) salt를 결정화 핵제로 사용하였다. 폴리머 컴파 운드의 열적 및 기계적 특성은 DSC, HDT, UTM을 통해 측정하였다. 이 연구의 결과로서, 컴파운드 한 폴리머 샘플 들의 내열특성은 핵제의 함량 증가와 미세분말 일수록 선형적으로 증가 하였다. 그 중에서MPZ2의 함량이 2 wt%일 때 가장 높은 내열특성을 나타내었으며, PL98Z2 컴파운드의 열변형 온도는 116℃를 나타내었다 (ASTM D 648, 0.455MPa). This paper is to review and study about the crystallization nucleating agent to improve the heat-resistance properties of poly(lactic acid). Four sub-micron sized nucleating agents, metallic salts of 2,2'-methylene bis(4,6-di-tert-butylphenol), were prepared and used as a crystallization nucleating agent. Thermal and mechanical properties of polymer compounds were investigated by DSC, HDT and UTM. As the results, While the heat-resistance properties of the polymer compound samples were increased linearly with the contents of nucleating agent as well as their smaller size. Among them, the highest heat-resistance property of compound was observed with 2 wt% of MPZ2. HDT values of PL98Z2 compound was 116℃ at 0.455Mpa.
심재호(Jae-Ho Sim) 한국산학기술학회 2018 한국산학기술학회논문지 Vol.19 No.7
이성질체의 형태는 수용액 상태에서 종종 안정성과 반응성 등의 기본상태 뿐만 아니라 사슬성장 및 접힘 과정으로 인하여 형태형성에 영향을 주기 때문에 올리고펩티드의 형태를 이해하는 것이 중요하다. 본 논문에서는 L-알라닌(LA), 글리신(G) 5량체 모델의 무수 및 수화물(수화율; h/1) 상태의 구조와 에너지를 4가지 형태이성질체 (베타-확장형;= t-/t+, PPII형; g-/t+, PPII-유사형; g-/g+ 및 알파-나선형; g-/g-)에 대하여 B3LYP/6-31G(d,p)를 이용하여 양자화학계산(QCC) 방법으로 분석하였다. 구조최적화는 밀도함수 이론(DFT)으로써 B3LYP를 사용하였으며, 기본설정(Basic set)으로는 6-31G(d,p)를 이용하였다. 이미노 양성자(NH)를 갖는 LA와 G에서 베타-확장형, PPII-유사형, 알파-나선형의 3가지 형태가 얻어졌으며, 대부분 물 분자가 PPII-유사형과 알파-나선형에서는 CO-HN 분자 내 수소결합 사이에 주로 삽입되었고, 베타-확장형은 CO기에 부착되었다. 또한, LA와 G에서 PPII-유사형 형태이성질체가 무수 및 수화물 상태에서 가장 안정적이었으며, PPII 형태이성질체는 얻어지지 않았다. LA에 대한 결과는 알라닌 올리고펩티드의 안정적인 형태가 주로 PPII라고 보고한 다른 연구의 실험적 및 이론적인 결과와는 상이했다. 올리고펩티드 형태이성질체의 생성패턴과 안정성이 CO-HN의 분자 내 수소결합의 존재 여부 또는 출발 아미노산 내 NH2기의 존재 여부에 강한 영향을 받는 것을 알 수 있었다. The structures and energies of the anhydrate and hydrate (hydrate rate: h of 1) states of L-alanine (LA) and glycine (G) were calculated by quantum chemical calculations (QCCs) using B3LYP/6-31G(d,p) for four types of conformers (β-extended: φ/ψ = t-/t+, PPII: g-/t+, PPII-like: g-/g+, and α-helix: g-/g-). In LA and G, which have an imino proton (NH), three conformation types of β-extended, PPII-like, and α-helix were obtained, and water molecules were inserted mainly between the intra-molecular hydrogen bond of CO···HN in PPII-like and α-helix, and attached to the CO group in β-extended. In LA and G, PPII-like conformers were most stable in the anhydrate and hydrate states, and the result for LA was different from some experimental and theoretical results from other studies reporting that the main stable conformation of alanine oligopeptide was PPII. The formation pattern and stability of the conformation of the oligopeptide was strongly dominated by the presence/absence of intra-molecular hydrogen bonding of CO···HN, or the presence/absence of an NH2 group in the starting amino acid.