http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강봉 및 강관을 이용한 프리스트레싱 유닛의 긴장 응력 손실 평가
심재일 ( Jae-il Sim ),문주현 ( Ju-hyun Mun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.4
이 연구의 목적은 강관과 강봉을 이용하여 프리스트레스력의 도입이 가능하도록 개발된 프리스트레싱(prestressing reinforcing units using steel bar and pipe, 이하 SP) 보강재의 응력손실을 확인하는데에 있다. 주요변수는 SP 보강재의 종류, 프리스트레스력의 크기 및 도입방법이다. 실험결과 SP 보강재의 응력손실은 프리스트레스력이 직접 도입하는 초기단계에서 가장 크게 있었는데, 그 크기는 압축도입형 보다 인장도입형에서 더 크게 있었다. SP 보강재의 응력손실은 프리스트레스력이 항복강도의 80%로 도입된 P800 강종인 압축도입형 실험체에서 1.6%로 가장 낮았다. 한편 시간경과에 따른 SP 보강재의 릴랙세이션은 압축도입형의 경우 SP 보강재의 종류, 프리스트레스력의 크기에 관계없이 0.4~1.9%로 평가되었는데, 이는 설계기준들에서 제시하고 있는 릴랙세이션 2.5% 이하를 만족하는 수준이었다. 결과적으로 프리스트레스력 도입 즉시 발생하는 응력손실을 감안할 때에 개발된 SP 보강재의 재질과 프리스트레스력 도입방식 및 크기는 각각 P800, 압축도입형 및 항복강도의 80%로 추천된다. The objective of this study is to examine the loss of prestressing stress in the developed prestressing reinforcing units using steel bar and pipe (SP). The main parameters were the reinforcing bar type, the magnitude of prestressed force, and prestressing method. The test results showed that the loss of prestressing stress for SP was highest in the initial prestressing step, which was higher for the compression introduction typed specimens than tension introduction typed specimens. The loss of prestressing stress of SP made with P800 was 1.6% for the compression introduction typed specimen with 0.8f<sub>y</sub>, which was lowest than the other specimens. Meanwhile, the relaxation of SP with the respect to the time ranged between 0.4 and 1.9%, irrespective of SP material type, the magnitude of prestressed force, and prestressing method. These values were less than 2.5%, which is the maximum value for the relaxation of prestressed reinforcing steel bars in design codes. Consequently, considering the loss of stress developed in the initial prestressing step, the developed SP material type, prestressing introduction method, and magnitude are recommended to be P800, compression introduction type, and 0.8f<sub>y</sub>
경량 콘크리트의 유동성 및 역학적특성에 대한 굵은골재 최대크기의 영향
심재일(Sim Jae-Il),양근혁(Yang Keun-Hyeok) 대한건축학회 2012 大韓建築學會論文集 : 構造系 Vol.28 No.5
To provide the basic data for the reasonable lightweight concrete mixture design model, a test with a mixture ratio of 18 was conducted with the maximum coarse aggregate size, water-binder ratio and type of the lightweight concrete as main parameters. The slump and air content were measured from the uncured concrete, and the compression strength by age, air content, tensile strength, modulus of rupture and modulus of elasticity were measured from the cured concrete. The measured kinetic characteristics were compared with the design standard to evaluate the structural safety. The test results showed that the initial slump and air content of the lightweight concrete were higher with a smaller maximum size of the coarse aggregate. The water-binder ratio had a significant effect on the kinetic characteristics of the lightweight concrete, but the maximum size of the coarse aggregate did not. This was because the failure of the lightweight concrete penetrated the aggregate, and the resistance effect of the low-strength aggregate decreased. The test results were properly evaluated according to the ACI 318-11 design standard on the modulus of elasticity of the lightweight concrete.
X-자 좌굴구속형 강재댐퍼로 보강된 RC 프레임의 댐핑계수
심재일 ( Sim Jae-il ),문주현 ( Mun Ju-hyun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
이 연구에서는 좌굴구속형 강재 댐퍼로 보강된 RC 프레임의 댐핑계수를 측정하여 댐퍼로서의 보강효율성을 평가하였다. 그 결과 내부부착 창호형의 최대하중 이후 80%로 저하되는 시점의 댐핑계수는 0.257로서 무보강 실험체 보다 약 2.14배 높았으며, 내부부착 벽식형에서는 0.262으로서 무보강 실험체 보다 약 2.19배 높았다. 결과적으로 좌굴구속형 강재 댐퍼를 이용하여 보강된 RC 프레임의 댐핑계수는 0.257 이상으로서 높은 수준의 보강효율성을 보유하고 있음을 확인하였다.
경량잔골재 치환율에 따른 경량콘크리트의 슬럼프와 역학적 특성
심재일 ( Sim Jae-il ),양근혁 ( Yang Keun-hyeok ),이재삼 ( Lee Jae-sam ) 한국구조물진단유지관리공학회 2010 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.14 No.1
The objective of the present study in to examine the effect of the amount of lightweight fine aggregate on the initial slump and different mechanical properties of all-lightweight concrete. The initial slump of lightweight concrete was significantly dependent on the amount and water-absorption capacity of lightweight fine aggregate. In addition compressive strength decrease with lightweight fine aggregate.