http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Arrayed-Waveguide Grating의 경로 오차 측정을 위한 저 간섭 광원 간섭계
송영기,허남춘,정영철,Song, Young-Ki,Heo, Nam-Chun,Chung, Young-Chul 한국광학회 2004 한국광학회지 Vol.15 No.6
An improved low coherence interferometer system and a new analysis method for the accurate measurement of the optical path difference error of an AWG (Arrayed-Waveguide Grating) are described. The use of software simplifies the experimental setup by eliminating the hardware (clock generator). In addition, the actual distances between the peak positions of the adjacent interference signals are calculated using interpolation methods. The wavelength transmission characteristics of the AWG are calculated assuming the measured phase errors. The calculated AWG characteristic is quite similar to the actual measurement result, confirming accuracy of the proposed measurement setup. 고밀도 AWG (Arrayed-Waveguide Grating)의 광 경로차 에러를 정확히 측정하기 위하여 개선된 형태의 저간섭 광원 간섭계를 구성하였고, 새로운 해석방법을 제시하였다. 소프트웨어적인 방법을 이용하여 하드웨어면에서 실험장치를 간략화할 수 있었다. 또한 인접 간섭신호들 사이의 실제 피크 위치 차이를 보간법을 이용하여 정확히 측정할 수 있다. 특정 AWG의 위상 에러를 측정하였고, 이 에러를 가정하여 계산한 파장 투과 특성이 실제 AWG의 파장투과 특성과 유사함을 보임으로써, 제시한 측정 장치의 정확성을 입증하였다.
실시간 분산 시스템의 객체지향 소프트웨어 시험을 위한 정형모델
송영기(Young Kee Song),이재섭(Jae Sup Lee),이형호(Hyeong Ho Lee),윤병남(Byeong Nam Yoon),David Kung(David Kung),Pei Hsia(Pei Hsia) 한국정보과학회 1995 정보과학회 컴퓨팅의 실제 논문지 Vol.1 No.2
본 논문에서는 실시간 분산 시스템의 객체지향 소프트웨어 시험을 위한 확장된 정형 시험 모델을 제안한다. 제안된 모델은 객체 관계 다이어그램, 객체 상태 다이어그램 및 객체내의 블럭흐름 다이어그램을 기반으로 하고 있으며, 동기화, 통신 형태, 시간의 제약성 등 실시간 분산 시스템의 주요 개념들을 반영하여 확장되고 있다. 제안된 정형 모델로부터 객체지향 소프트웨어 시험을 위한 방법과 도구들을 제시하고 일부 도구의 프로토타입을 구현하여 봄으로써 모델의 적용 가능성을 확인한 결과를 기술한다. In this paper, we propose an extended formal model for testing object -oriented real-time distributed systems. This model is based on Object Relation Diagram, Object State Diagram, and Block Branch Diagram, and extended to add the concept of real-time distributed system, such as, synchronization, communication type, and timing constraints. We suggest methods and utility tools for object-oriented software testing from the proposed formal model, and describe the validation result to show the applicability of the model by prototyping some of them.
양성자 가속기 진공장치 제어용 사용자 인터페이스 설계 및 구현
송영기(Young-Gi Song) 한국엔터테인먼트산업학회 2008 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2 No.1
양성자 가속기는 양성자 빔을 생산하기 위해 각각의 제어 장치를 통해 전달되는 신호들을 정확하게 처리할 수 있는 안전적인 제어 시스템이 필요하다. 특히 사용자는 가속장치 신호들을 모니터링하며 필요에 따라 신호 값을 저장해야 한다. 또한 가속 장치가 동작하는 동안 이상 값이 나타나는지 주기적으로 검사를 하여 안정적인 실험 환경을 제공하여야 하며 이를 위해 사용자가 쉽게 접근 가능한 HMI(Human Machine Interface)가 요구된다. 양성자 기반 공학 기술 개발 사업단에서는 양성자 빔을 가속시키기 위한 가속장치를 개발 중에 있다. 가속장치 중에 진공을 유지하는 진공장치는 사용자가 운전 중에 진공 압력을 확인하여 안정적으로 가속장치를 운전할 수 있는 환경이 필요하다. 사용자와 실제 가속장치 간에 HMI를 위한 소프트웨어 개발에는 상당한 비용이 필요하며, 상용소프트웨어의 경우 대형장치에 통합 적용에는 검증된바가 없어 이를 보완하기 위해 개발된 EPICS(Experimental Physics and Industrial Control System)를 채택하여 HMI에 적용하였다. 본 논문에서는 양성자 빔을 가속시키는 가속 장치의 진공상태가 적합한지 판단하기 위해 진공 장치 구조를 바탕으로 진공 장치 제어 시스템을 설계하고, 실시간으로 들어오는 진공 값을 저장하기위해 Channel Archiver를 적용하고, EPICS 데이터베이스 레코드들을 사용하여 알람을 설정하였다. 이들 기능들을 통합하여 안정적인 운전 환경을 제공하는 진공 장치 제어용 HMI를 설계 및 구현하였다.
송영기(Young-ki Song),한현규(Hyeon-Gyu Han),조재수(Jae-Soo Cho) 제어로봇시스템학회 2021 제어·로봇·시스템학회 논문지 Vol.27 No.8
This paper proposes an AI-based welding robot 3D vision module and manipulator control system for welding automation. With conventional welding robots, welding is performed only at the designated welding points through robot teaching; however, the difficulty with this method is that the position of the welding point changes due to the tolerance (gap) of the welding object. To solve this problem, we automatically recognized the welding points using a deep learning-based object detection model called YOLOv4. The time required for labeling was thus reduced through a deep learning labeling tool that uses an existing learned weights file. To control the robot with the recognized welding point, a hand/eye calibration method calculating the homogeneous transformation matrix between the robot and the camera was adopted. Additionally, to correct the final robot control error caused due to calibration and camera depth errors, the control precision at the welding point was improved through interpolation method. The system has been verified by conducting sufficient number of experiments in a non-destructive formwork welding environment.
갑상선기능항진증의 간소엽중심부 간세포손상의 진단적 평가를 위한 isocitrate dehydrogenase 활성도 측정
최원범(Won Bum Choi),정영화(Young Hwa Chung),정성애(Sung Ae Jung),송병철(Byung Cheol Song),김정아(Jeong A Kim),김정원(Jung Weon Kim),송일한(Il Han Song),장우영(Woo Young Chang),송영기(Young Kee Shong),이영상(Yung Sang Lee),서동진(Don 대한내과학회 2000 대한내과학회지 Vol.58 No.2
N/A Background : The zonal differentiation of hepatic necrosis is important in the aspect of treatment, follow-up and prognosis of patients. The purpose of this study was evaluating the clinical usefulness of serum isocitrate dehydrogenase (ICDH) as a marker of centrilobular hepatic necrosis in patients with hyperthyroidism. Methods : We determined the serum ICDH and alanine aminotransferase (ALT) activities in 56 patients with hyperthyroidism, 16 patients with chronic viral hepatitis, and 17 normal controls. Results : The activities of serum ICDH were significantly higher in patients with hyperthyroidism than those of patients with chronic viral hepatitis or normal control (p<0.01), even though those of serum ALT were higher in patients with chronic viral hepatitis (p<0.01). The ratio of serum ICDH and ALT activities were markedly different between the patients with hyperthyroidism and chronic viral hepatitis (p<0.001). There was a significant correlation between the serum ICDH and ALT activities in patients with hyperthyroidism as well as in those with chronic viral hepatitis (p<0.05). In patients with hyperthyroidism, the serum ICDH levels were more significantly correlated with serum triiodothyronine (T3) than thyroxine (T4) levels. In a patients with hyperthyroidism and elevated ALT levels, the serum ICDH activity decreased progressively and was normalized ultimately, as serum ALT level and thyroid function were normalized with antithyroid medication. Conclusion : The serum ICDH or ratio of serum ICDH and ALT activities might be useful clinically in differentiating the centrilobular from periportal hepatic necrosis, and following up the degree of hepatic necrosis in patients with hyperthyroidism.(Korean J Med 58:189-196, 2000)
정영식(Young S Chung),최완(Wan Choi),김성희(Sung H Kim),송영기(Young K Song) 한국정보과학회 1992 한국정보과학회 학술발표논문집 Vol.19 No.1
근래의 컴퓨터 하드웨어가 CISC에서 고성능의 RISC로 변화함에 따라 전전자 교환기 개발에 사용되고 있는 CHILL 언어를 MIPS RISC 프로세서를 가진 컴퓨터에서 운영할 수 있도록 컴파일러를 개발하였다. CHILL 컴파일러는 전위 처리기와 후위 처리기로 구성되어 있는데, MIPS용 CHILL 컴파일러에서 전위 처리기는 기존의 VAX와 MC68020용 전위 처리기를 그대로 사용하고 MIPS용 후위 처리기를 별도로 개발하였다. 후위 처리기는 EM 중간 코드를 입력으로 받아서 MIPS 프로세서에서 수행 가능한 어셈블리 언어를 생성한다. 후위 처리기의 구현은 ACK의 테이블 구동 방식을 이용하였으며, 이 방식은 기계 기술 테이블과 기계에 종속적인 부분을 처리하는 프로그램들을 작성하므로서 가능하다.