http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 성아영 ( A Young Sung ) (검색결과 89 건)
- 무료
- 기관 내 무료
- 유료
-
THERMAL POLYMERIZATION OF 2-HYDROXYETHYL METHACRYLATE WITH PHENYLSILANS
성아영,Sung, A Young 한국안광학회 2000 한국안광학회지 Vol.5 No.2
Poly(HEMA)는 소프트 콘택트렌즈의 재료로써 널리 사용되어 왔다. $phSiH_3$, $phMeSiH_2$, $ph2SiH_2$와 같은 다양한 hydrosilane들과 hydroxyethyl methacrylate(HEMA)와의 열중합은 Phenylsilyl 말단기를 포함하는 poly(HEMA)를 생성시켰다. 열중합 반응 동안에는 Phenylsilane의 농도가 증가함에 따라 고분자의 분자량과 고분자 수득률이 감소됨을 보였으며 광중합 반응에서 보다 중합 수득률, 고분자의 분자량, TGA 잔여 수율 등이 더 높았다. Poly(HEMA)s have been used as the optometric material for the preparation of soft contact lens. The bulk thermal polymerization of 2-hydroxyethyl methacrylate (HEMA) with various hydrosilanes such as $phSiH_3$, $phMeSiH_2$, and $ph2SiH_2$ were performed to produce poly(HEMA)s containing phenylsilyl end moeity. It was found for thermal polymerization that while the polymerization yield and polymer molcular weights decreased as the relative phenylsilane concentration increases, the TGA residue yields and the relative intensities of SiH IR stretching bands increased as the relative hydrosilane concentration increases over HEMA. The polymerization yield, molecular weight, and TGA residue for the thermal polymerization were higher than those for the photo polymerization. Thus, the hydrosilanes significantly influence on the polymerization as both chain-initiation and chain-transfer agents.
-
UV Absorbent-added Polymerization and its Application as Ophthalmological Material
성아영,김태훈,예기훈,Sung, A-Young,Kim, Tae-Hun,Ye, Ki-Hun Korean Chemical Society 2011 대한화학회지 Vol.55 No.1
본 연구는 자외선 흡수제로 사용되는 benzophenone계(group) 및 높은 굴절률과 화학적, 물리적으로 매우 안정한 물질로 알려진 $TiO_2$를 기존의 재료에 첨가하여 자외선 차단 기능을 가진 고분자 재료를 중합하였다. 중합 결과 생성된 고분자의 자외선 흡수 정도를 기존의 재료들과 비교하였으며, 제조된 콘택트렌즈의 함수율, 굴절률 및 광투과율등의 기본적인 물성을 측정하였다. 측정 결과, 자외선 흡수제를 첨가한 콘택트렌즈의 굴절률과 함수율은 각각 1.430~1.440, 35.0~45.0의 값들로 나타나 기존의 콘택트렌즈와 비슷한 결과를 나타내었다. 또한 각 파장대별 광투과율에서는 자외선 흡수제를 넣지 않은 콘택트렌즈에서는 UV-A, UV-B, 가시광선 투과율이 각각 89%, 88%, 89%로 나타나 자외선 투과율이 매우 높았으나, 2-hydroxy-4-methoxy-benzophenone와 2,4-dihydroxy-benzophenone을 첨가한 콘택트렌즈의 경우, 각각 UV-A 0%, UV-B 6%의 투과율을 나타내어 자외선 차단 효과가 있는 것으로 나타났다. 또한 $TiO_2$를 첨가한 콘택트렌즈의 경우, 각각 UV-A 6%, UV-B 51%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 가시광선 투과율은 모두 77~89%로 콘택트렌즈의 가시광선 투과율의 조건에 만족함을 알 수 있었다. This study was done for the preparation of macromolecular material with UV-blocking features by adding the benzophenone group that is commonly used as a UV-absorbent and $TiO_2$ which is known to be a very stable material in chemical and physical aspects. Also, we compared the level of UV absorbency of the polymer produced from polymerization with previous materials and measured basic properties such as water content, refractive index and optical transmittance of produced contact lenses. The results of the measurement showed that the refractive index and water content of the contact lens with added UV-absorbent was 1.430~1.440 and 35.0~45.0% respectively, which was similar to that of previous contact lenses. Also, for optical transmittances of each wave length, contact lenses without the UV-absorbent was 89%, 88% and 89% respectively for UV-A, UV-B and visible light, indicating that the UV transmittance is very high though contrary with cases of contact lenses with added 2-hydroxy-4-methoxy-benzophenone and 2,4-dihydroxy-benzophenone which showed transmittances of 0% and 6% respectively for UV-A and UV-B showing a UV-blocking effect. Meanwhile, contact lenses with added $TiO_2$ showed transmittance of 6% and 51% respectively for UV-A and UV-B also showing a UV-blocking effect. The visible transmittance was 77~89% showing that it satisfies the visible transmittance required for ophthalmological materials.
-
POLYMERIZATION OF HEMA IN THE PRESENCE OF PHENYLSILANES
성아영,Sung, A-Young 한국안광학회 2001 한국안광학회지 Vol.6 No.2
Phenylsilane들과 2-Hydroxyethylmethacrylate(HEMA)의 광중합은 말단기에 phenylsilyl기를 포함하고 있는 poly(HEMA)s를 생성시킴으로써 열중합과 같은 결과를 보였다. 중합반응 동안에 실란의 몰비율이 증가함에 따라 중합수율과 고유점도는 감소하였으며, TGA 잔여수율과 Si-H IR 신축띠의 상대적 세기는 증가하는 경향을 보였다. phenylsilanne은 HEMA와의 광중합 반응에서 연쇄개시제와 전달물질로 중요한 영향을 주었다. The bulk photopolymerization of 2-hydrxyethylmethacrylate(HDMA) with phenylsilane was perforemed to produce poly(HEMA)s containing phenylsilyl moiety presumably as an end group. This result, are the same as that of thermal polymerization. It was found that while the polymerization yields and intrinsic viscosities decreased, the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increasing molar ratio of phenylsilane over HEMA. The phenylsilane seemed to significantly influence on the photopolymerization as both chain initiation and chain transfer agents.
-
실란을 포함한 친수성 콘택트렌즈의 물리적 특성에 대한 Isocyanate Group의 영향
성아영,조선아,김태훈,Sung, A-Young,Cho, Seon-Ahr,Kim, Tae-Hun 대한화학회 2012 대한화학회지 Vol.56 No.5
본 연구는 triacetoxyvinlysilane을 첨가제로 사용하여 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) 그리고 개시제인 AIBN (azobisisobutyronitrile)과 함께 공중합 하였다. 생성된 고분자의 물리적 특성을 측정한 결과, 함수율 35.63~32.44%, 굴절률 1.4382~1.4480, 가시광선 투과율 89.0~92.5%, 인장강도는 0.346~0.674 kgf를 나타내었다. 기본 모노머 조합에 triacetoxyvinlysilane을 첨가한 조합과 1%의 hexamethylene diisocyanate를 첨가하여 중합한 조합의 물성을 비교한 결과 hexamethylene diisocyanate 1%를 첨가하여 중합한 렌즈의 인장강도가 더 큰 값을 나타내었다. 본 실험결과로 볼 때 생성된 공중합체는 내구성 및 인장강도가 우수한 안의료용 렌즈 재료로 사용될 수 있을 것으로 판단된다. The copolymerization of triacetoxyvinylsilane, EGDMA (ethylene glycol dimethacrylate as a cross-linker), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) was performed in the presence of AIBN (2,2'-azobisisobutyronitrile) as an initiator. Measurement of the physical properties of the resulting copolymers showed that water content, refractive index, visible ray transmittance, and tensile strength were in the range of 35.63~32.44%, 1.4382~1.4480, 89.0~92.5% and 0.346~0.674 kgf, respectively. The values of tensile strength of copolymers-containing hexamethylene diisocyanate were higher than those of the copolymers containing triacetoxyvinylsilane. From the results we came to the conclusion that the produced copolymers are suitable for the application of ophthalmic contact lens with high tensile strength, wettability and duraility.
-
-
-
UV Absorbent-added Polymerization and its Application as Ophthalmological Material
성아영(Sung, A-Young),김태훈(Kim, Tae-Hun),예기훈(Ye, Ki-Hun) 대한화학회 2011 대한화학회지 Vol.55 No.1
본 연구는 자외선 흡수제로 사용되는 benzophenone계(group) 및 높은 굴절률과 화학적, 물리적으로 매우 안정한 물질로 알려진 를 기존의 재료에 첨가하여 자외선 차단 기능을 가진 고분자 재료를 중합하였다. 중합 결과 생성된 고분자의 자외선 흡수 정도를 기존의 재료들과 비교하였으며, 제조된 콘택트렌즈의 함수율, 굴절률 및 광투과율등의 기본적인 물성을 측정하였다. 측정 결과, 자외선 흡수제를 첨가한 콘택트렌즈의 굴절률과 함수율은 각각 1.430~1.440, 35.0~45.0의 값들로 나타나 기존의 콘택트렌즈와 비슷한 결과를 나타내었다. 또한 각 파장대별 광투과율에서는 자외선 흡수제를 넣지 않은 콘택트렌즈에서는 UV-A, UV-B, 가시광선 투과율이 각각 89%, 88%, 89%로 나타나 자외선 투과율이 매우 높았으나, 2-hydroxy-4-methoxy-benzophenone와 2,4-dihydroxy-benzophenone을 첨가한 콘택트렌즈의 경우, 각각 UV-A 0%, UV-B 6%의 투과율을 나타내어 자외선 차단 효과가 있는 것으로 나타났다. 또한 를 첨가한 콘택트렌즈의 경우, 각각 UV-A 6%, UV-B 51%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 가시광선 투과율은 모두 77~89%로 콘택트렌즈의 가시광선 투과율의 조건에 만족함을 알 수 있었다. This study was done for the preparation of macromolecular material with UV-blocking features by adding the benzophenone group that is commonly used as a UV-absorbent and which is known to be a very stable material in chemical and physical aspects. Also, we compared the level of UV absorbency of the polymer produced from polymerization with previous materials and measured basic properties such as water content, refractive index and optical transmittance of produced contact lenses. The results of the measurement showed that the refractive index and water content of the contact lens with added UV-absorbent was 1.430~1.440 and 35.0~45.0% respectively, which was similar to that of previous contact lenses. Also, for optical transmittances of each wave length, contact lenses without the UV-absorbent was 89%, 88% and 89% respectively for UV-A, UV-B and visible light, indicating that the UV transmittance is very high though contrary with cases of contact lenses with added 2-hydroxy-4-methoxy-benzophenone and 2,4-dihydroxy-benzophenone which showed transmittances of 0% and 6% respectively for UV-A and UV-B showing a UV-blocking effect. Meanwhile, contact lenses with added showed transmittance of 6% and 51% respectively for UV-A and UV-B also showing a UV-blocking effect. The visible transmittance was 77~89% showing that it satisfies the visible transmittance required for ophthalmological materials.
-
-
Thermal Polymerization of 2 - Hydroxyethyl Methacrylate with Phenylsilans
A Young Sung(성아영) 한국안광학회 2000 한국안광학회지 Vol.5 No.2
Poly(HEMA)s have been used as the optometric material for the preparation of soft contact lens. The bulk thermal polymerization of 2-hydroxyethyl methacrylate (HEMA) with various hydrosilanes such as phSiH₃, phMeSiH₂. and ph₂SiH₂ were performed to produce poly ( HEM A ) s containing phenylsilyl end moeity. It was found for thermal polymerization that while the polymerization yield and polymer molcular weights decreased as the relative phenylsilane concentration increases, the TGA residue yields and the relative intensities of SiH IR stretching bands increased as the relative hydrosilane concentration increases over HEMA. The polymerization yield. molecular weight, and TGA residue for the thermal polymerization were higher than those for the photo polymerization. Thus, the hydrosilanes significantly influence on the polymerization as both chain-initiation and chain-transfer agents.
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
