http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서인식 ( In-shik Seo ),김병탁 ( Byung-tak Kim ) 한국산업융합학회 2007 한국산업융합학회 논문집 Vol.10 No.2
In case of an urban tunnel, the displacement of ground base controls the tunnel design because it is built on shallow and unconsolidated ground many times. There are more insufficiency to describe the ground movement which coincides in the measured result of the situ because the design of an urban tunnel is dependent on the method of numerical analysis used to the existing elastic and elasto-plastic models. We studied about the prediction for the ground movement of a shallow tunnel in unconsolidated ground, mechanism of collapse, and settlement. Also this paper shows comparison with the existing elastic and elasto-plastic model using the unlinear analysis of the strain-softening model. We can model the real ground movement as the increasement of ground surface inclination or occurrence of shear band by using strain-softening model for the result of ground movement of an urban NATM tunnel.
補强斜面에 대한 Centrifuge Test와 Two-part Wedge 解析의 比較評價
서인식(In-Shik Seo),이친(Chin Lee),김병탁(Byung-Tak Kim) 한국산업융합학회 1999 한국산업융합학회 논문집 Vol.2 No.2
Results of two-part wedge analysis and centrifuge test executed by Zornberg et al. were compared for geotextile-reinforced slope stability. For two-part wedge analysis results of two cases, a frictional case considering internal friction of soil as interwedge friction and a nonfrictional case not considering, were also compared and evaluated. The analysis was based on limit equilibrium and two-part wedge was divided into slices as many as the number of geotextiles to obtain a maximum tension distribution mobilized in reinforcements. A significant observation was that the distribution was a triangular shape with maximum tension of geotextile at a transit point of interwedge. The number of geotextiles and failure surface of frictional case were reasonable and more comparable to results of the centrifuge tests than those of nonfrictional case. Therefore it can be said that two-part wedge analysis is recommendable for design analysis of reinforced slopes if an interwedge angle is regarded to be an angle of internal friction in soil.<br/>
서인식 ( In-shik Seo ),김동락 ( Dong-rak Kim ) 한국산업융합학회 2005 한국산업융합학회 논문집 Vol.8 No.2
Foliated metamorphic, stratified sedimentary and regularity jointed rocks have properties(physical, mechanical) that vary with direction (β°) and are said to be anisotropic. The ground in Daegu area consists of shales, clastic sedimentary rocks. These shales have plane anisotropic or transversely isotropy characteristics. Engineering characteristics of shale in Daegu area are investigated by performing a series of rock test to the bedding(β =0, 30, 60, and 90 degrees). The results of tests show that the uniaxial compressive strength is a maximum at β = 0, 90° and is a minimum when β is around 60 degree.
포화(飽和)모래의 전단강도특성(剪斷强度特性)에 관(關)한 실험적(實驗的) 연구(?究) -대구지역(大邱地域) 낙동강(洛東江) 모래에 대해-
김영수,서인식,김병탁,Kim, Young Su,Seo, In Shik,Kim, Byoung Tak 대한토목학회 1994 대한토목학회논문집 Vol.14 No.6
본 연구에서 삼축압축시험기를 이용하여 낙동강유역 모래에 대한 상대밀도, 전단변형어속도, 구속압력의 변화에 의한 전단강도 특성을 고찰하였다. 그리고 Lade 모델과 수정 Lade 모델의 결과는 실험에 의하여 비교하였다. 전단변형제어속도, 상대밀도 그리고 구속압력변화에 의한 결과를 요약하면 다음과 같다. 1) 낙동강유역의 모래에 대해 Coulomb의 식을 이용할 수 있는 응력의 한계는 변형제어속도가 0.08%/min일 때 120~200 kpa이고 0.5%/min일 때 120~150 kpa의 범위로 고찰되었다. 이들 한계범위들은 석회질 모래나 양입도의 석영질 모래에 비해 적게 나타났다. 2) 변형제어속도와 상대밀도 모두가 Lade 모델과 수정 Lade 모델에 필요한 매개변수에 많은 영향을 미친다. 따라서 현장에서는 하중조건과 지반조건을 정확히 파악하여 적절한 매개변수를 사용하는 것이 중요하다. 3) 변형제어속도와 상대밀도의 변화에 따른 구성모델식에 의한 파괴시 주응력비는 전반적으로 변형제어속도에는 큰 영향을 받지 않으나, 상대밀도와 구속압력이 구성 모델식의 결과에 영향을 미치는 것으로 나타났다. 따라서 낙동강유역의 모래에 대한 응력-변형거동의 정확한 예측을 위해서는 다양한 조건에 대한 연구가 필요할 것으로 판단된다. 4) Lade 모델과 수정 Lade 모델에서 결정된 파괴시 주응력비와 파괴포락선의 내부마찰각을 실측치와 비교한 결과, 본 연구에서 사용된 구속응력 범위내에서는 Lade 모델이 수정 Lade 모델보다 평균적으로 실측치에 더 근접함을 보여 주었다. In this study, shear strength characteristics of the Nak-Dong river sand in Taegu area are investigated by triaxial compression test, considering shear strain control velocity, relative density, and confining pressure. The results from Lade model and Modified Lade model are compared with the measured value in the laboratory test. The results by the change of shear strain control velocity, relative density, and confining pressure are as follows; 1) The stress limit, which can be Coulomb's law about the Nak-Dong river sand, have ranged 120~200 kpa at 0.08%/min and 120~150 kpa at 0.5%/min. These limits are smaller than that of the calcareous sand and the well-graded, quartz sand. 2) The parameters needed to Lade model and Modified Lade model are much affected by the strain control velocity and the relative density. Consequently, in the field, it is important to use parameters aptly after accurately understanding both the loading condition and subsoil condition. 3) Overall, the principal stress ratio obtained from constitutive model equations is not affected by the control velocity, but both the relative density and confining pressure affect the result of constitutive model equations. Consequently, the study on the various conditions about the relative density and confining pressure is needed to accurately predict the stress-strain behavior on the Nak-Dong river sand. 4) For the range of the used confining pressure in the study, the Lade model shows better agreements with the measured value than the Modified Lade model, comparing the measured value with the principal stress ratio at failure and the internal friction angle of failure envelope obtained from the Lade model and Modified Lade model.
이상호,김동락,서인식,Lee, Sang-Ho,Kim, Dong-Rak,Seo, In-Shik 한국농공학회 2012 한국농공학회논문집 Vol.54 No.5
A evaluation for the strength of rock includes a lot of uncertainty due to existence of discontinuity surface and weakness plain in the rock mass, so essential test results and other data for the resonable strength analysis are absolutely insufficient. Therefore, a analytical technique to reduce such uncertainty can be required. A probabilistic analysis technique has mainly to make up for the uncertainty to investigate the strength of rock mass. Recently, a artificial neural networks, as a more newly analysis method to solve several problems in the existing analysis methodology, trends to apply to study on the rock strength. In this study the unconfined compressive strength from basic physical property values of sedimentary rock, black shale and red shale, distributed in Daegu metropolitan area is estimated, using the artificial neural networks. And the applicability of the analysis method is investigated. From the results, it is confirmed that the unconfined compressive strength of the sedimentary rock can be easily and efficiently predicted by the analysis technique with the artificial neural networks.
충전율에 따른 폐광산 채굴적 공동의 변위거동에 관한 연구
김동락(Dong-Rak Kim),서인식(In-Shik Seo) 한국산업융합학회 2011 한국산업융합학회 논문집 Vol.14 No.4
The domestic mine development community the countermeasure establishment is insufficient about ground sinkage, not only the mine which is a in line is partial from the mine of the most which has become the rest mine and abandoned mine or the index sinkage occurs. The ground sinkage which occurs from the abandoned mine area most after operation is stopped, a long time passes and accurately predicts an occurrence location and a time with the residual sinkage which occurs, is difficult. Underground goaf of the abandoned mine and the closed shaft When considering the potentiality which causes the instability of ground, is a possibility of reaching a damage in the ground infrastructure or life. The underground shaft which is formed specially with mine development and goaf operates with the obstacle factor in the development project of the mine area, the ground sinkage which is caused by with sinkage, operates with the large safety accident occurrence factor where the important infrastructure of the railroad, road, residential area etc. is damaged. Therefore, In this paper, the goaf cave of the abandoned mine area, for the displacement behavior according to the filling factor of the material is to analyze the numerical analysis.