http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
터널 굴착 시 주변 구조물에 미치는 영향을 고려한 발파 설계 사례
백승규(Seung-Kyu Baek),추석연(Seok-Yeon Choo),윤종오(Jong-O Yoon),백운일(Un-Il Baek),박형섭(Hyung-Seop Park) 한국암반공학회 2006 터널과지하공간 Vol.16 No.5
본 연구에서는 기존의 시추공 시험 발파 결과를 이용한 분석뿐만 아니라, 3차원 수치 해석으로 터널 굴착 시 실제 발파와 동일한 조건을 적용한 발파진동영향 검토를 실시하고 주변 구조물에 미치는 진동 영향을 분석하여 발파패턴 설계를 수행하였다. In generally blasting pattern design is carried out in-situ borehole blasting test and its analysis. We added the 3D numerical analysis for blast induced vibrations. This paper is case study of 3D numerical analysis in which considered blast induced vibration affected across buildings, and then we design the blasting pattern of tunnel excavation.
노병국,박종관,백승규,Roh, Byoung-Kuk,Park, Jong-Kwan,Baek, Seung-Kyu 한국터널지하공간학회 2013 한국터널지하공간학회논문집 Vol.15 No.2
최근 터널 갱구부와 저토피 구간에 대한 환경 친화적인 터널공법에 대한 관심이 증가하고 있다. 콘크리트 슬래브를 이용한 반개착식 터널공법을 적용한 연구 및 시공사례가 증가하고 있으나, 하중조합 및 아치콘크리트의 단면에 대한 별도의 적용 기준이 없다. 따라서 본 연구에서는 반개착식 공법에 대한 기준을 제시하기 위하여 지반조건과, 터널 상부 지층 두께, 되메움 두께, 상부지반 지표면의 경사 각도를 변화시키는 등의 다양한 조건들에 대하여 수치해석을 수행하였다. 수치해석 결과들을 회귀분석법으로 분석하고, 유도된 회귀 분석식을 분류하고 정리하여 합리적이고, 경제적이며, 안전한 반개착식 터널 굴착 공법의 기준을 제안하고자 하였다. Recently there has been increased interest for the portal and shallow tunnel for an eco-friendly tunneling method. Semi cut & cover tunnel excavation techniques applied to concrete slab and construction and a growing number of cases, but there is no load combinations and arch concrete cross section for the applicable standards. Therefore, in this study, ground conditions and tunnel overburden thickness, thickness of backfill, overburden surface slope angle changes to a variety of conditions in order to propose standards for the semi cut & cover method was performed numerical analysis. Regression analysis method to the analysis of the results of numerical analysis, and linear regression equations derived to classify and organize a rational, economical, and safe semi cut & cover tunneling method based proposed.
카린시안 터널 공법의 기준 제안을 위한 수치 해석적 연구 -국내 고속철도 복선터널 표준 단면을 기준으로-
노병국 ( Byoung Kuk Roh ),백승규 ( Seung Kyu Baek ),차민웅 ( Min Woong Cha ) 대한화약발파공학회 2013 화약발파 Vol.31 No.1
개착식공법과 NATM 공법을 결합한 카린시안(Carinthian) 공법에 대한 관심이 증가하고 있다. 아치콘크리트를 이용한 설계 및 시공 사례가 증가하고 있으나, 아치 단면에 대한 별도의 적용 기준이 없다. 따라서 본 연구에서는 카린시안 공법에 대한 기준을 검토하기 위하여 지반조건과, 터널 상부 지층 두께, 되 메움 두께, 상부지반 지표면의 경사 각도를 변화시키는 등의 다양한 조건들에 대하여 수치해석을 수행하였다. 수치해석 결과들을 회귀분석법으로 분석하고, 유도된 회귀 분석 식을 분류하고 정리하여 합리적이고, 경제적이며, 안전한 카린시안 공법의 기준을 제안하고자 하였다. Carinthian cut and cover tunnelling method which combines cut & cover and NATM tunnel excavation method has increased the interest. Design and construction of arch concrete have been increased, but there is no applicable standards for arch concrete. Therefore, in this study numerical analysis was performed to propose standards for the Carinthian tunnelling method considering a variety of conditions such as ground conditions, tunnel overburden thickness, thickness of backfill, and overburden surface slope angle changes, linear regression equations derived to classify and organize a rational, economical, and safe Carinthian cut and cover tunneling method based proposed.
안우정 ( Woo Jung Ahn ),백승규 ( Seung Kyu Baek ) 대한상하수도학회 2007 상하수도학회지 Vol.21 No.3
Toxicity evaluations using oxygen uptake rate (OUR) on activated sludge process were investigated. On toxicity evaluations of heavy metals, all toxicants in experiments decreased OUR with respect to the concentrations of the toxicants, while high toxicities with cyanide and mercury were observed respectively. On toxicity evaluations of composite heavy metals, composite toxicities had similar results as to the total sum of each toxicants that presents accurate toxicity evaluation using OUR. From these results, it is concluded that activated sludge is effective indicator for toxicity evaluation on wastewater of biological treatment plants.
반개착식 터널 공법의 기준 제안을 위한 수치해석적 연구
노병국(Byoung-Kuk Roh),박종관(Jong Kwan Park),백승규(Seung Kyu Baek) 한국철도학회 2013 한국철도학회 학술발표대회논문집 Vol.2013 No.5
터널 갱구부와 저토피 구간에 대하여 원지반의 훼손을 최소화할 수 있는 환경 친화적인 반개착식 터널공법을 적용한 연구 및 시공사례가 증가하고 있으나, 하중조합 및 아치콘크리트의 단면 등 반개착식 터널공법에 대한 별도의 적용 기준이 없는 실정이므로 과다한 설계가 되고 있다. 본 연구에서는 수치해석적 검토를 수행하여 반개착식 터널공법의 설계 기준을 제안하고자 한다. 설계에 영향을 줄 수 있는 요인인 지반조건, 터널 상부 지층 두께, 상부지반의 경사각도, 아치콘크리트의 두께 등을 변화시키며, 수치해석을 실시하였다. 수치해석 결과들에 대한 각 영향인자들의 상관관계 분석을 실시하여, 합리적이고 경제적이며, 안전한 아치콘크리트의 제원을 제안하여 반개착식 터널공법의 기준을 제시하고자 하였다. Research techniques applied to the tunnel and construction of environmentally friendly semi-cut and cover tunnel portal and shallow section of the foundation can minimize corruption and a growing number of cases, but the load combinations and the cross-section of the concrete arch and half cut & cover tunnel method not apply for separate standards, so the design has become excessive. In this study, semi cut & cover tunnel design process of a review numerical criteria are proposed. Of factors that can affect the design, numerical analysis was conducted by varying the inclination of the upper soil, ground conditions, tunnel upper strata thickness, the thickness of the concrete arch. The numerical results, the correlation analysis of influence factors for each of the rational, economical, and safe specifications of concrete arch semi cut & cover tunnels of the proposed criteria were proposed.