http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
잡음 내성이 큰 단일 출력 레벨 쉬프터를 이용한 500 V 하프브리지 컨버터용 구동 IC 설계
박현일,송기남,이용안,김형우,김기현,서길수,한석봉,Park, Hyun-Il,Song, Ki-Nam,Lee, Yong-An,Kim, Hyoung-Woo,Kim, Ki-Hyun,Seo, Kil-Soo,Han, Seok-Bung 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.8
In this paper, we designed driving IC for 500 V resonant half-bridge type power converter, In this single-ended level shifter, chip area and power dissipation was decreased by 50% and 23.5% each compared to the conventional dual-ended level shifter. Also, this newly designed circuit solved the biggest problem of conventional flip-flop type level shifter in which the power MOSFET were turned on simultaneously due to the large dv/dt noise. The proposed high side level shifter included switching noise protection circuit and schmmit trigger to minimize the effect of displacement current flowing through LDMOS of level shifter when power MOSFET is operating. The designing process was proved reasonable by conducting Spectre and PSpice simulation on this circuit using 1${\mu}m$ BCD process parameter.
대기모드 기능을 내장한 전원 장치 제어용 PWM IC 설계
박현일,김형우,김기현,서길수,한석붕,Park, Hyun-Il,Kim, Hyoung-Woo,Kim, Ki-Hyun,Seo, Kil-Soo,Han, Seok-Bung 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.4
In this paper, we designed the off-line PWM(Pulse width modulation) control IC for flyback type power converter to reduce the standby power consumption. In normal state, this off-line PWM IC generates the output pulse with $40\sim60kHz$ frequency and duty ratio of $20\sim88%$. When SMPS operates in standby mode, this IC generates the output pulse with 33kHz frequency and duty ratio of 1 %. SPICE simulation was performed to verify the standby power consumption of the power converter with designed of-line PWM IC. Power converter with designed off-line PWM IC consumes less than 0.3W when it operates in standby mode condition.
관리통제시스템이 조직학습과 동기유발을 통해 조직성과에 미치는 영향
박현일(Park Hyun-il),이원기(Lee Won-ki) 한국국제회계학회 2016 국제회계연구 Vol.0 No.66
본 연구의 목적은 관리통제시스템이 어떠한 경로를 통해 조직성과와 연결되는지를 규명하는 것이다. MCS가 조직성과와 연결되기 위해서는 조직구성원을 조직이 원하는 방향으로 이끌기 위한 행동적 반응을 중요하게 고려해야 하지만 기존의 연구들에서는 이에 대한 충분한 논의가 이루어지지 못했다. 따라서 본 논문에서는 Chenhall(1997)이 제시한 조직학습과 동기유발을 매개변수로 하여 MCS와 조직성과의 관련성에 대해서 국내 제조업을 대상으로 실증분석을 하였다. 구조방정식 모형을 통한 주요 분석결과를 살펴보면 다음과 같다. 관리통제시스템은 조직학습과 동기유발에 모두 유의한 정(+)의 인과관계를 가지는 것으로 나타났다. 그러나 매개변수로 고려한 조직학습과 동기유발 중 동기유발만 조직성과로 고려한 비재무적 성과에 유의한 정(+)의 인과관계를 가지는 것으로 나타났다. 이는 불확실성이 증가한 최근의 경영환경에서 조직학습의 역할이 단순히 오류를 탐지하고 수정하는 것뿐만 아니라 조직의 비전과 전략에 대한 근본적인 의문을 제시할 수 있어야 한다는 것을 제시하는 결과이다. 이상의 분석결과는 관리통제시스템의 설계에서 행동적 반응인 동기유발에 대한 중요성을 강조할 뿐만 아니라 조직학습의 확장적인 역할에 대한 시사점을 제시할 수 있다. The purpose of this study is to investigate whether organizational performance and management control systems are connected via any route. MCS connection with the organization and the organization to become more important for organizations to consider behavioral reactions did not lead to the desired direction, but the existing studies are enough discussion about this place. In this paper, Chenhall (1997) and the organization"s learning and motivation, and this was presented as an empirical parameter for domestic manufacturers for the relevant MCS and organizational performance. The results of structural equation model analysis are as follows. Management control systems are found to have a causal relationship between positive (+) significant for both organizational learning and motivation. However, only the organization of learning and motivational incentives as a parameter was considered as having a causal relationship between significant positive (+) on non-financial performance consideration in organizational performance. It is suggested that the results will not only be able to present the fundamental questions about the organization"s vision and strategy for the role of organizational learning from the recent increase in uncertainty in the business environment simply detect and correct errors. Or more analysis results can be not only to emphasize the importance of the behavioral response of an incentive in the design of the management control system presents the implications for the role of the tissue expansion study.
역해석 기법에 근거한 수직배수재로 개량된 연약점토지반의 침하예측
박현일(Park Hyun Il),김윤태(Kim Yun-Tae),황대진(Hwang Daejin),이승래(Lee Seung Rae) 대한토목학회 2006 대한토목학회논문집 C Vol.26 No.4
수직배수재가 설치된 연약지반의 압밀거동을 해석하기 위하여 아무리 정교한 수치해석기법을 사용하더라도 비균질 다층지반의 대표지반정수의 추정, 압밀거동에 대한 수치모델링 및 계측시스템 오차 등과 관련된 불확실성 때문에 실제 현장에서 관측되는 거동은 설계단계에서 예측된 거동과 종종 다르게 발생된다. 본 연구에서는 다층지반으로 구성된 복잡한 압밀물성특성을 갖는 연약지반에 대하여 압밀물성특성을 정확히 예측하기 위해 유전자 알고리즘에 근거한 역해석 기법을 제안하였다. 다층 연약지반의 압밀과정 초기단계에서 계측된 거동을 바탕으로 본 프로그램에 적용된 역해석기법을 이용하여 압밀거동과 관련된 주요 설계변수를 최적화함으로써 장래의 압밀거동을 비교적 정확히 예측하는 것이 가능하다. 국내 배수재가 설치된 다층지반에 대한 예제해석을 수행하여 제안된 역해석 기법의 적용성을 검토하였다. Observed field behaviors are frequently different from the behaviors predicted in the design state due to several uncertainties involved in soil properties, numerical modeling, and error of measuring system even though a sophisticated numerical analysis technique is applied to solve the consolidation behavior of drainage-installed soft deposits. In this study, genetic algorithms are applied to back-analyze the soil properties using the observed behavior of soft clay deposit composed of multi layers that shows complex consolidation characteristics. Utilizing the program, one might be able to appropriately predict the subsequent consolidation behavior from the measured data in an early stage of consolidation of multi layered soft deposits. Example analyses for drainage-installed multi-layered soft deposits are performed to examine the applicability of proposed back-analysis method.