P/M Fecralloy의 성형성 및 전기저항특성 향상에 관한 연구

박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-Young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.6

The Fe-Cr-Al alloy system shows an excellent heat resistance because of the formation of an $Al_2O_3$ film on the metal surface in an oxidizing atmosphere at high temperatures up to $1400^{\circ}C$. The Fecralloy needs an additive that can act as a binder because of its bad compactability. In this study, the green compacts of STS434L and Al powder added to Fecralloy are oxidized at $950^{\circ}C$ for up to 210 h. Fecralloy and Al is mixed by two types of ball milling. One is vented to air and the other was performed in a sealed jar. In the case of Al addition, there are no significant changes in the electrical resistance. Before the oxidation test, Al oxides are present in the Fecralloy surface, as determined from the energy dispersive spectroscopy results. The addition of Al improves the compactability because of an increased density, and the addition of STS434L increases the electrical resistivity by forming a composite oxide.

P/M Fecralloy 성형체의 고온산화 및 전기저항 안정성에 미치는 SiO₂ 첨가 효과

박진우,옥진욱,정우영,박동규,안인섭,Park, Jin-Woo,Ok, Jin-Uk,Jung, Woo-young,Park, Dong-kyu,Ahn, In-Shup 한국분말야금학회 2017 한국분말재료학회지 (KPMI) Vol.24 No.4

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

타당성 평가가 보완된 모델 운용상의 전투실험 모의분석 절차 연구

박진우,김능진,강성진,서혁,Park, Jin-Woo,Kim, Nung-Jin,Kang, Sung-Jin,Soo, Hyuk 한국시뮬레이션학회 2010 한국시뮬레이션학회 논문지 Vol.19 No.4

Currently, our society has been changed from the industrial society to the information society. As the war progresses to Information Warfare, Network-Centric Warfare, Long-Range Precision Engagement and Robot Warfare, the military should advance to High-tech Scientific force. For this creation of the war potential, it is regarded as the warfighting experiment is a critical method. Surely it is rational that LVC(Live Virtual Constructive simulation) is desirable to make the warfighting experiment. But because it is limited by the cost, the time, the place and the resource, the constructive simulation(M&S : Modeling&Simulation) is a good tool to solve those problems. There are some studies about the evaluation process for developing the model, but it is unsatisfying in the process of the constructive simulations' operation. This study focuses on the way of constructive simulation operation, which is supplied with the evaluation process(VV&A : Verification Validation & Accreditation). We introduce the example of the rear area operation simulation for "appropriateness evaluation to the organization of logistic corps" by the AWAM(Army Weapon Analysis Model). This study presents the effective methods of the constructive simulations, which is based on the reliable evaluation process, so it will contribute to the warfighting experiments.

산화물 혼합상이 페라이트계 P/M스테인리스강의 고온산화 및 전기저항 안정성에 미치는 영향

박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.3

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

탈단백 우골의 골이식 대체재로서의 특성에 대한 평가;세 종류의 골 대체재의 기본 특성에 대한 비교분석

박진우,Park, Jin-Woo 대한치주과학회 2005 Journal of Periodontal & Implant Science Vol.35 No.4

Bovine bone-derived bone substitutes are widely used for treatment of bone defects in dental and orthopedic regenerative surgery. The purpose of this study was to evaluate the basic characteristics of deproteinized bovine bone mineral as a bone graft substitute. Commercially available products from three different bovine bone minerals-Bio-Oss(GeistlichPharma, Switzerland), BBP(Oscotec. Korea), Osteograf/N-300(Dentsply Friadent Ceramed, USA) - were investigated. They were evaluated by scanning electron microscopy(SEM), energy dispersive X-ray spectrometer(EDS), surface area analysis(BET), and Kjeldahl protein analysis. Cell viability on different products was evaluated by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide(MTT) assay. The results of this study indicated that each bone substitute displayed distinct surface properties. Furthermore, Kjeldahl protein analysis indicated that residual crude proteins are present in deproteinized bovine bone mineral. BBP showed relatively large amount of residual protein, which indicated that the possibility of disease transmission can not be safely ruled out. Based on the results of this study, it is suggested that active quality management is strongly needed in operations that involve processing bovine bone tissue for medical use.

LVQ 자력등화를 이용한 와이브로 시스템의 성능 개선

박진우,Park, Jin-Woo 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.10

WiBro(Wireless Broadband Internet) is the standard of high-speed portable internet based on OFDMA/TDD (Orthogonal frequency division multiple access / Time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose performance improvements of WiBro system using the LVQ(Learning Vector Quantization) blind equalization. Proposed method used the prefiltering LVQ neural network blind equalization in the Broadband WiBro system receiver. The prefiltering LVQ neural network constellates 16QAM that is transmitter data shape and the blind equalization removes ICI(Inter Carrier Interference). To verificate the proposed method usability, the MSE(Mean Square Error) and the BER(Bit Error Rate) are simulated. The simulation results shown that is improved the performances of the proposed WiBro system using the LVQ blind equalization than the existing WiBro system. 와이브로는 OFDMA/TDD 기술을 기반으로하는 고속 이동 인터넷 표준이고, IEEE802.16e 무선 MAN 표준 통합버전의 하나이다. 본 논문에서는 LVQ 자력등화를 이용한 와이브로 시스템의 성능 개선을 제안하였다. 제안한 방법은 Broadband 와이브로 시스템 수신단에 전처리 LVQ 신경망 자력등화를 사용한다. 전처리 LVQ 신경망은 송신데이터 형태인 16QAM으로 분류하고 자력등화는 ICI를 제거한다. 제안한 방법의 유용성을 확인하기 위하여 MSE와 BER에 대하여 시뮬레이션 하였으며, 시뮬레이션 결과 제안한 LVQ 자력등화를 이용한 와이브로 시스템은 기존의 와이브로 시스템보다 성능이 개선되었음을 확인하였다.

LVQ를 이용한 무선 센서 네트워크의 실내 위치 인식

박진우,정경권,엄기환,Park, Jin-Woo,Jung, Kyung-Kwon,Eom, Ki-Hwan 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.5

본 논문에서는 LVQ(Learning Vector Quantization) 네트워크를 이용한 수신 신호 세기(Received Signal Strength Indication) 기반 실내 위치인식 시스템을 제안하였다. 제안한 방식의 유용성을 확인하기 위하여 실험을 수행하였고, 일반적인 삼각측량 방법과 비교하였다. 실험실을 40개의 영역으로 나누고 6개의 고정 노드를 설치하였다. 무선 채널의 대수-정규 경로 손실 모델을 구성하고, 수신 신호 강도를 거리로 변환하였다. 변환한 정보를 LVQ의 입력으로 사용하였다. LVQ 네트워크의 학습을 위해 영역의 인덱스를 목표값으로 설정하였다. 실험을 통해서 최적의 서브클래스 개수를 결정하였고, LVQ 네트워크의 훈련을 통해서는 96%, 테스트를 통해서는 91%의 성능을 확인하였다. This paper proposed indoor location recognition method based on RSSI(received signal strength indication) using the LVQ network. In order to verify the effectiveness of the proposed method, we performed experiments, and then compared to the conventional triangularity measurement method. In the experiments, we set up the system to the laboratory, divided the 40 section, and installed 6 nodes as a reference node. We obtained the log-normal path loss model of wireless channels, RSSI converted into the distance. The distance values used as the input of LVQ. To learn the LVQ network, we set the target values as section indices. In the experiments, we determined the optimal number of subclass, and confirmed that the success rate of training phase was 96%, test phase was 91%.

운모기판을 이용한 다결정 Si 전이막 성장 연구

박진우,엄지혜,안병태,정영권,Park Jin Woo,Eom Ji Hye,Ahn Byung Tae,Jun Young Kwon 한국재료학회 2004 한국재료학회지 Vol.14 No.5

We investigated the growth feasibility of polycrystalline Si film on mica substrate for the transfer of the layer to a plastic substrate. The annealing temperature was limited up to $600^{\circ}C$ because of crack development in the mica substrate. Amorphous Si film was deposited on mica substrate by PECVD and was crystallized by furnace annealing. During the annealing, bubbles were formed at the Si/mica interface. The bubble formation was avoided by the Ar-plasma treatment before amorphous Si deposition. A uniform and clean polycrystalline Si film was obtained by coating $NiCl_2$ on the amorphous Si film and annealing at $500^{\circ}C$ for 10 h. The conventional Si lithography was possible on the mica substrate and the devices fabricated on the substrate could be transferred to a plastic substrate.

톳(Hizikia fusiforme)과 모자판(Sargassum fulvellum) 에탄올 및 물 추출물의 아질산염 소거작용

박진우,이문조,윤현민,김철호,Park, Jin-Woo,Lee, Moon-Jo,Yoon, Hyun-Min,Kim, Cheorl-Ho 한국생명과학회 2001 생명과학회지 Vol.11 No.4

The purpose of this study was to investigate the nitrite scavenging activity of the ethanol and water extracts obtained from Hizikia fusiforme and Sargassum fulvelum using sodium nitrite under different pH conditions. The nitrite scavenging activity was appeared in all the extracts examined and it showed the highest value at pH 1.2 The ethanol extract of Hizikia fusiforme provided higher activity than the water extract of that. Ohterwise, the nitrite scavenging activity of Sargassum fulvelum ethanol extract was similar to that Sargassum fulvelum water extract. There was significant difference among concentration of extracts Hizikia fusiforme and Sargassum fulvelum. Also, nitrite scavenging activity of the extracts Hizikia fusiforme and Sargassum fulvelum decreased with higher pH condition. In addition, the activity was increaed with higher concentration of extracts Hizikia fusiforme and Sargassum fulvelum in the course of reaction time 30 minute to 3 hour.

($XiVE^{(R)}$ 임프란트의 성공률에 관한 후향적 연구;임상성적에 관한 조기평가

박진우,Park, Jin-Woo 대한치주과학회 2005 Journal of Periodontal & Implant Science Vol.35 No.1

This retrospective study evaluates the clinical performance of the recently introduced $XiVE^{(R)}$ implant(Dentsply-Friadent) with a new macro-design to improve primary stability. A total of 208 $XiVE^{(R)}$ implants (101 in the maxilla and 107 in the mandible) were placed in 71 patients. The average age of the patients was 49 years. Of the 208 implants, 190 (91.3%) were posterior implants and 82 (39.4%) were placed in compromised sites (grafted sites). Clinical and radiographic evaluation were made at second stage surgery for exposure and after functional loading. 192 implants in 64 patients were evaluated at exposure and 146 implants in 50 patients were loaded (average 170 days-loading) and evaluated after functional loading. Of 192 implants available for evaluation before loading, 3 implants failed (early failure) ; 1 before exposure, 1 at exposure and 1 during prosthetic procedure. 2 implants were in the maxilla and 1 was in the mandible. The success rate before loading was 98.4%. After functional loading, no implant failure was occurred in 146 implants evaluated during this period (100% interval success rate). This preliminary data with a new implant showed excellent success rate although the majority of implants evaluated in this study were placed in the posterior region of the jaw and compromised sites.