http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Streptococcus mutans에 대한 클로르헥시딘과 Erythrosine 광역동 치료의 상승효과
박종철,박호원,이시영,Park, Jongcheol,Park, Howon,Lee, Siyoung 대한소아치과학회 2013 大韓小兒齒科學會誌 Vol.40 No.4
이 연구의 목적은 치과 임상에서 널리 사용되는 항미생물제제인 클로르헥시딘과 할로겐을 이용한 erythrosine 광역동 치료를 병용하였을 때, 부유 상태의 Streptococcus mutans에 미치는 항균효과를 평가하기 위함이다. S. mutans 표준 균주를 Brain Heart Infusion broth medium에 첨가하여 부유 상태로 배양하였다. 치과용 할로겐 광중합 장치를 광원으로 사용하였으며 치태 착색제인 erythrosine을 광감각제로 사용하였다. 클로르헥시딘의 최소살균농도를 측정하고, erythrosine 광역동 치료에서 최소살균농도를 결정하기 위해 $1{\mu}M$, $5{\mu}M$, $10{\mu}M$의 erythrosine 농도를 사용하여 할로겐 광중합기로 15초 동안 광조사를 시행한 후 세균수를 측정하였다. 마지막으로 클로르헥시딘과 erythrosine 광역동 치료를 병용한 경우 나타나는 상승효과를 평가하기 위해, 최소살균농도 이하인 0.001% 클로르헥시딘과 최소살균농도 이하인 $1{\mu}M$ erythrosine 광역동 치료를 병용하여 항균효과를 비교하였다. 최소살균농도 이하의 클로르헥시딘만 단독으로 사용하는 경우 S. mutans의 세균수가 유의하게 감소하지 않았다(p < 0.05). 또한 erythrosine 광역동 치료만 단독으로 시행한 경우에는 $5{\mu}M$, $10{\mu}M$의 erythrosine 농도에서 유의하게 세균수가 감소하였지만, $1{\mu}M$ erythrosine 농도에서는 세균수가 유의하게 감소하지 않았다(p < 0.05). 마지막으로 두 가지 치료법의 상승효과를 평가하기 위해 최소살균농도 이하인 $1{\mu}M$ erythrosine 광역동 치료와 0.001% 클로르헥시딘을 병용하는 경우에는, 대조군과 비교하여 세균수가 유의하게 감소하였다(p < 0.05). 최소살균농도 이하인 0.001% 클로르헥시딘과 $1{\mu}M$ erythrosine 광역동 치료를 각각 단독으로 시행하는 경우에는 유의한 항균효과가 없었지만, 두 가지 치료를 병용하는 경우 61%의 S. mutans 세균수가 감소하였다. 이상의 결과를 종합해 볼때 S. mutans에 대해 최소살균농도 이하의 클로르헥시딘과 erythrosine 광역동 치료를 병용하는 경우 상승효과가 있음을 알 수 있다. The purpose of this study was to investigate the synergistic effects of erythrosine sensitized with a conventional halogen curing unit and sub-minimal bactericidal concentration(sub-MBC) of chorhexidine on bacterial viability of Streptococcus mutans in planktonic state. Sub-minimal bactericidal concentration of chlorhexidine was added into wells containing bacteria and erythrosine. The range of concentrations tested for chorhexidine was from 0.0000001% to 0.001%. The irradiation of the bacterial suspensions was performed for 15 sec with a conventional halogen curing unit light. In another set of experiment, the effects of 0.001% chlorhexidine were observed by adding chlorhexidine into wells containing the sub-minimal bactericidal concentration of erythrosine. At the concetration of 0.001% chlorhexidine, there were no antibacterial effects in the absence of erythrosine PDT(p < 0.05). At the concentraton of $1{\mu}M$ erythrosine, there was no photodynamic therapy effect in the absence of chlorhexidine(p < 0.05). But in the presence of sub-minimal bactericidal concentration of erythrosine with light exposure, the addition of 0.001% chlorhexidine increased the bactericidal rate(p < 0.05). A combination of erythrosine PDT with sub-MBC chlorhexidine resulted in a significant reduction in bacterial counts when compared to the case with the absence of chlorhexidine.
연약지반상 압성토의 최적단면 및 측구위치 결정을 위한 해석적 연구
박종철(Jongcheol Park),장용채(Yongchai Chang),백인철(Incheol Baek),정동환(Donghwan Jung) 한국지반신소재학회 2015 한국지반신소재학회 논문집 Vol.14 No.1
압성토공법은 성토체의 안정성을 높이기 위하여 성토체 측면에 일정한 폭과 높이로 흙을 쌓은 공법을 말한다. 본 연구는 실제 도로현장에서 전단파괴가 발생되어 복구방법으로 압성토공법을 적용한 시공사례를 분석한 것이다. 본 연구는 수치해석을 실시하여 효율적인 압성토 단면을 제시하고자 한다. 수치해석결과 효율적인 압성토 단면은 압성토 폭 : 제체 높이의 2배(2H), 압성토 높이 : 제체높이의 1/3(H/3) 이다. 또한, 압성토체를 가로지르는 측구를 설치할 경우, 본성토체로부터 적절한 이격거리를 제시함으로서 효과적인 횡단측구의 범위를 제시하였다. The counter weight filling is a technology to accumulate soils on the side of berm with a proper width and height for improving the stability of the embankment. This study aims to assess a feasibility of the counter weight filling in the construction of pavement roads for recovery of shear failure during the construction. An effective counter weight filling section was suggested using the numerical analysis. The results showed that the effective counter weight filling section is two-fold (x2) higher than the ratio of width in counter weight filling : embankment height and one third (1/3) to the ratio of height in counter weight filling : embankment height. Also a range of effective trench crossing the counter weight filling required when a trench crossing counter weight filling is installed was suggested by supplying a proper distance between the counter weight filling section and cross-sectional trench.
Performance Evaluation of a Plate-Type Membrane Humidifier for PEMFC
고백균(Kho, Back Kyun),박종철(Park, JongCheol),한인수(Han, In-Su),신현길(Shin, Hyun Khil),허태욱(Hur, Tae Uk),조성백(Cho, Sungbaek) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.05
For optimal performance of a proton exchange membrane fuel cell (PEMFC), the membrane electrode assembly (MEA) requires hydration, and the membrane's conductivity depends on water content. A humidifier is required to ensure that the reactant gas, usually hydrogen and air, is hydrated before entering the fuel cell. Dry membrane operation or improper hydration causes performance degradation. Typically, the humidification of a fuel cell is carried out by means of an internal or external humidifier. A membrane humidifier is applied to the external humidification of transportation or residential power generation fuel cell due to its convenience and high performance. In this study, The experiments were constructed with a plate-type membrane humidifier in terms of geometric parameters and operating parameters. The results show that the temperature and pressure, the channel length, the membrane thickness and gas flow rate are critical parameters affecting the performance of the humidifier.
Optimization of Vent Logic for Cascade Type Fuel Cell Module
임종구(Lim, Jongkoo),박종철(Park, Jongcheol),권기욱(Kwon, Kiwook),신현길(Shin, Hyun Khil) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.11
Many type of fuel cell stacks have been developed to improve the efficiency of reactants usage. The cascade type fuel cell stack using dead end operation is able to attain above 99% usage of hydrogen and oxygen. It is sectionalized to several parts and the residual reactants which are used previous parts would be supplied again to next parts which have less number of cells in dead end operation stack. The oversupply of reactants which is usually 120%~150% of the theoretical amount to generate current for preventing the flooding effect could be provided to each part except the last one. The final section which is called monitoring cells is supposed to be supplied insufficient the fuel or oxidant that would have some accumulated inert gas from former parts. It makes some voltage drop in the part and the fresh reactants must be supplied to the part for recovering it by venting the residual gas. So the usage of fuel and oxidant is depend on the time and frequency of opening valves for venting of residual gas and it is important to optimize the vent logic for achieving higher usage of hydrogen and oxygen. In this research, many experiments are performed to find optimal condition by evaluating the effect of time and frequency under several power conditions using over 100kW class fuel cell module. And the characteristics of the monitoring cells are studied to know the proper cell voltage which decide the condition of opening the vent valve for stable performance of the cascade type fuel cell module.
고백균(Kho, Back Kyun),박종철(Park, JongCheol),임종구(Lim, Jongkoo),권기욱(Kwon, Ki Wook),신현길(Shin, Hyun Khil),허태욱(Hur, Tae Uk),조성백(Cho, Sungbaek) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
고분자전해질연료전지(PEMFC)의 성능은 고분자막의 이온전도도에 따라 큰 영향을 받으며 가습조건에 따라 연료의 수화정도에 비례하여 증가하는 경향을 보인다. 현재 고분자막을 가습하는 방법에는 여러 가지가 있는데, PEMFC에 많이 사용되고 있는 Bubbler 형태의 가습장치는 고온이 필요하며 가습 효율이 수동적인 단점을 가지고 있다. 이에 비해서 막을 이용한 가습방법은 스택의 냉각시스템을 이용하여 가습 시, 별도의 에너지가 필요하지 않다. 이에 본 연구에서는 비교적 저온에서도 가습 효율이 증대하고 시스템 간소화의 장점을 가진 막가습기를 제작하여 고분자전해질 연료전지에서 열 및 습도조절에 대한 효율성을 비교 연구하였다. 막가습기에 사용된 가습막의 두께에 따른 가습도 변화 및 유로 구조에 따른 압력강화를 관찰하였으며 막가습기를 판형 모듈 형태로 제작하여 고분자전해질연료전지에 적용하여 성능을 평가하였다.