중유전율 LTCC 기판용 $CaZrO_3-CaTiO_3$계 세라믹스의 저온소결 및 유전특성

박정현,최영진,고원준,박재환,박재관,Park Jeong-Hyun,Choi Young-Jin,Ko Won-Jun,Park Jae-Hwan,Park Jae-Gwan 한국마이크로전자및패키징학회 2004 마이크로전자 및 패키징학회지 Vol.11 No.3

[ $CaZrO_3$ ]세라믹스에 대하여 $CaTiO_3$세라믹스의 첨가량 변동에 따른 마이크로파 유전특성을 조사하였다. 또한 중유전율 LTCC 기능성 기판으로 활용하기 위하여 저융점의 유리 프리트를 첨가하여 $CaZrO_3-CaTiO_3$ 세라믹스의 저온 소결 거동과 마이크로파 유전특성을 평가하였다. 저온 소결 조제로 사용된 저응점의 유리 프리트를 $10-20 wt\%$ 범위로 첨가함으로서 $CaZrO_3-CaTiO_3$ 세라믹스의 소결온도를 $1450^{\circ}C$에서 $900^{\circ}C$이하로 낮출 수 있었다. 음의 온도계수를 갖는 $CaZrO_3$ 및 유리프리트에 대하여 양의 온도계수를 갖는 $CaTiO_3$ 세라믹스의 분율을 적정히 제어함으로서 제로의 온도계수를 구현할 수 있었다. $CaZrO_3-CaTiO_3$ 세라믹스에 저온 소결용 유리 프리트를 $15 wt\%$ 첨가하여 $875^{\circ}C$에서 소결한 경우. 유전율(k) 23, 품질계수(Q${\times}$f) 2500, 공진 주파수 온도계수$(T_f) -3 ppm/^{\circ}C$의 매우 양호한 마이크로파 유전특성을 나타내었다. The microwave dielectric properties of $CaZrO_3$ ceramics with addition of $CaTiO_3$ were studied. The effect of glass addition on the low-temperature sintering and microwave dielectric properties of $CaZrO_3-CaTiO_3$ ceramics were also evaluated to develop the materials for functional substrates of low-temperature co-fired ceramics. When $10-20 wt\%$ of lithium borosilicate glass was added, the sintering temperature of the $CaZrO_3-CaTiO_3$ ceramics decreased from $1450^{\circ}C$ to below $900^{\circ}C$. As the $T_f$ of glass frits and $CaZrO_3$ are slightly negative and that of $CaTiO_3$ is significantly positive, zero $T_f$ could be realized by mixing an appropriate amount of $CaTiO_3$ with $CaZrO_3$. The $CaZrO_3-CaTiO_3$ ceramics sintered at $875^{\circ}C$ with $15wt\%$ glass frits showed the relative density of $98\%$, permittivity of 23, quality factor of 2500 GHz, and temperature coefficient of resonant frequency of $ -3 ppm/^{\circ}C$.

LTCC 내장 캐패시터용 BaTiO₃계 세라믹스의 저온소결 및 유전특성

박정현,최영진,고원준,박재환,남산,박재관,Park, Jeong-Hyun,Choi, Young-Jin,Ko, Won-Jun,Park, Jae-Hwan,Nahm, Sahn,Park, Jae-Gwan 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.2

[ $BaTiO_3$ ]계 유전체 모재료에 대하여 $Al_{2}O_{3}$와 CaO 조성이 소량 포함된 lithium-borosilicate계 유리 프릿을 $5\~15wt\%$ 적용함으로써 LTCC용 내장 캐패시터로 적용 가능한 조성을 개발하였다. 이를 위하여 먼저, 화학적으로 안정하고 저온소성효과가 탁월한 유리 프릿 조성물을 설계하고 이를 유전체 모재료에 적용하여 저온소성특성 및 유전특성을 평가하였다. $BaTiO_3$ 세라믹스를 모재료로 하는 경우 유리 프릿을 5wt$\%$ 첨가하였을 때 $925^{\circ}C$에서 $95\%$ 정도의 상대밀도 값을 나타내었으며, 이 경우 유전율 990, 유전손실 $3.1\%$의 유전특성을 나타내었다. $(Ba,Ca)(Ti,Zr)O_3$ 세라믹스를 모재료로 하여 유리프릿을 10 wt$\%$ 첨가한 경우는 $875^{\circ}C$의 소결온도에서 상대밀도가 $95\%$ 이상이며 기공율 $0.5\%$ 이하인 소결특성을 나타내었고, 700 이상의 유전율 및 $2\%$ 내외의 유전손실 값을 가지는 것으로 측정되었다. The compositions for LTCC embedded capacitors based on $BaTiO_3$ ceramics with $5\~15\;wt\%$ of lithium-borosilicate glass frits were studied. After the glass frits, which is chemically stable and has acceptable ability of low-temperature sintering, were added to the host dielectric materials, the sintering behavior and dielectric properties were evaluated. As for $BaTiO_3$, relative density of >$95\%$, permittivity 990, and dielectric loss $3.1\%$ were obtained when sintered at $925^{\circ}C$ with 5 wt$\%$ of glass frits. As for $(Ba,Ca)(Ti,Zr)O_3$ ceramics, relative density of >$95\%$, open porosity <$0.5\%$, permittivity 700, and dielectric loss $2\%$ were obtained when sintered at $875^{\circ}C$ with 10 wt$\%$ of glass frits.

재발된 누선과 안와 선양낭포암에 대한 전안와제거술 - 증례보고 -

박정현,김영수,최희윤,고용,오성훈,오석전,Park, Jeong Hyun,Kim, Young Soo,CHoi, Hee Yoon,Ko, Yong,Oh, Seong Hoon,Oh, Suck Jun 대한신경외과학회 2001 Journal of Korean neurosurgical society Vol.30 No.3

A 54-year-old woman presented with an exophthalmos and a mass on her right eye, which proved to be recurred adenoid cystic carcinoma of the lacrimal gland. Orbital CT and MRI showed that tumor was located in the right orbit, but skin over right eye brow was also involved. There was no visualization of tumor extension into the intracranial compartment. The authors have performed an en bloc orbitectomy. Although en bloc orbitectomy is known to be useful in reducing recurrence, this case showed the tumor recurrence and even distant metastasis that occurred after total tumor removal via en bloc orbitectomy. As adenoid cystic carcinoma of lacrimal gland is known to have high rate of recurrence and metastasis, en bloc orbitectomy should be performed to reduce local advancement and distant metastasis. In case of distant metastasis, radiotherapy could be useful strategy in selected case.

남해안 어류 및 전복가두리양식장의 퇴적물-수층 경계면에서의 물질플럭스 비교: 현장배양과 실내배양실험 연구

박정현,조윤식,이원찬,홍석진,김형철,김정배,Park, Jung-Hyun,Cho, Yoon-Sik,Lee, Won-Chan,Hong, Sok-Jin,Kim, Hyung-Chul,Kim, Jeong-Bae 해양환경안전학회 2012 해양환경안전학회지 Vol.18 No.6

지속적인 양식활동과 어장환경 보호를 위해서는 연안해역과 양식어종마다 각기 다른 연안생태계의 물질순환에 대한 연구가 필요하며, 양식장아래 퇴적물-수층 경계면의 침강 용출 플럭스에 관한 정확한 산정이 중요하다. 이에 관한 연구방법 중 벤틱 챔버를 이용한 현장배양법과 코아 채니를 이용한 실내배양실험법으로 퇴적물 산소요구량과 용존무기질소 용출 플럭스를 비교하여 보았다. 통영 어류 가두리양식장, 여수 어류 가두리양식장, 완도 전복양식장에 대하여, 퇴적물 산소요구량을 측정하여본 결과, 현장배양법은 116, 34, $31\;mmol\;O_2\;m^{-2}\;d^{-1}$, 실내배양법은 52, 17, $15\;mmol\;O_2\;m^{-2}\;d^{-1}$이었고, 용존무기질소 용출 플럭스의 경우, 현장배양법은 7.18, 7.98, $1.78\;mmol\;m^{-2}\;d^{-1}$, 실내배양법은 3.33, 3.74, $1.96\;mmol\;m^{-2}\;d^{-1}$로, 현장배양법이 실내배양법보다 약 2배 높게 나타났다. 본 연구는 각 양식장에 따른 물질 플럭스를 살펴봄으로서, 양식장아래 퇴적물-수층 경계면에 대한 두 가지 물질수지 계산 방법의 특성을 비교하였다. It is necessary to study the material circulation of coastal ecosystem according to aquacultural activity in order to induce the sustainable production of aquaculture and the fishery environment for the useful use. Hence, it is essential to make an exact assessment for the sedimentation release flux at the sediment-water interface in the aquafarm. Sediment oxygen demand and dissolved inorganic nitrogen release fluxes were compared using in-situ and laboratory incubational examination. Sediment oxygen demands were 116, 34, and $31\;mmol\;O_2\;m^{-2}\;d^{-1}$ (in-situ incubation), 52, 17, and $15\;mmol\;O_2\;m^{-2}\;d^{-1}$ (Core incubation) and dissolved inorganic nitrogen release fluxes were 7.18, 7.98, and $1.78\;mmol\;m^{-2}\;d^{-1}$ (in-situ incubation), 3.33, 3.74, and $1.96\;mmol\;m^{-2}\;d^{-1}$ (Core incubation) at Tongyeong finfish, Yeosu finfish, and Wando abalone cage farms, respectively. Consequently, in-situ incubation results showed two times higher than laboratory examination. We compared the material flux at the sediment-water interface of each farm and the characteristics between two different kinds of material flux examination.

PSZ, Al₂O₃, TiO₂를 반응소결하여 제조한 쾌삭(快削) 세라믹스

박정현,정동식,이원재,김일수,Park, Jeong Hyun,Jung, Dong Sik,Lee, Won Jae,Kim, Il Soo 한국세라믹학회 2012 한국세라믹학회지 Vol.49 No.6

Machinability is important in engineering applications, especially in the current micro-electronics industry. Most ceramic components have complex shapes and hence require machining generally with diamond tools, which incurs a high production cost. Recently, h-BN-containing machinable ceramics have been developed, but these materials are very expensive due to the high raw materials and production costs. Therefore, the development of low-cost machinable ceramics is necessary. In this study, inexpensive $Al_2TiO_5$ was studied as a replacement for h-BN. $Al_2O_3$, $TiO_2$ and partially stabilized $ZrO_2$(PSZ) powders were mixed with various mole ratios and were sintered at $1500^{\circ}C$ for 1 h. The density, hardness and strength were then measured. The phase analysis and microstructures were observed by XRD and SEM, respectively. The machinability of each specimen was tested by micro-hole machining. The results of this research showed that the produced composites could be used as low-cost machinable ceramics.

PCB 기구와 이종골을 이용한 경추체간 전방 유합술

박정현,오성훈,이형중,김주헌,김영수,고용,김광명,오석전,Park, Jeong Hyun,Oh, Seong Hoon,Yi, Hyeong Joong,Kim, Ju Heon,Kim, Young Soo,Ko, Yong,Kim, Kwang Myung,Oh, Suck Jun 대한신경외과학회 2001 Journal of Korean neurosurgical society Vol.30 No.11

Objective : PCB cervical instrument is a newly introduced fusion device which comprises cervical plate, cage (spacer) and screw system. It is developed to enhance fusion rate and stability, as well as to reduce complications related to hardware failure. We investigated the efficacy of clinical and radiological results of PCB instrument and Lubboc bone. Methods : From August, 1998 to October, 1999, authors performed 54 cases of anterior cervical interbody fusion with PCB instrument and Lubboc bone. Retrospective analysis was undertaken based on clinical and radiological findings. Clinical improvement was evaluated according to Odom's criteria. Cervical plain films and tomography were taken every 2 months to evaluate the degree of interbody fusion and disc height changes. Results : Bone fusion was observed in 36 cases(90%) over 6 months after operation, and during which time there was no significant interval change. There were 3 cases of hardware dislodgement. Disc height was increased significantly and preserved in all cases. Clinical outcome over good degree was seen more than 94% of patients. Conclusion : Longer follow-up period and comparative studies to similar instrument appear to be necessary, but this instrumentation system has shown high fusion rate and fewer adverse effects in our series. We believe this system might be indicated for the treatment of cervical trauma and degenerative disease in selective cases.

RADIUS 인증 및 과금 서버를 이용한 IP 관리 방법

박정현,Park Jeong-Hyun 한국정보처리학회 2005 정보처리학회논문지D Vol.12 No.1

GPRS 망으로 이동한 이동 ISP 가입자가 무선 인터넷 서비스를 제공 받기 위해 필요한 IP 할당과 인증 문제점을 알아보고 그 해결 방법으로 인증 및 과금 기능을 가진 RADIUS 인증 및 과금 서버론 이용한 IP 관리 기법을 제안하였다. 제안된 RADIUS 인증 및 과금 서버를 이용한 IP 관리 기법을 통해 GGSN은 할당된 IP의 갱신(할당시간 연장) 및 해제의 과정을 수행할 수 있도록 하고 지속적인 무선 인터넷 서비스 지원 및 IP 자원 관리를 가능하게 하며 이를 위해 ISP 내 RADIUS 서버와의 연동 신호를 정의하였다. This paper describes the requested IP assignment and authentication problem for wireless internet service of visited ISP subscriber on GPRS network, and proposes to use RADIUS authentication and accounting server for these problems. In this paper, we also define signals between GGSN and RADIUS, and between RADIUS authentication server and accounting sever for IP management and wireless internet service.

노년 여성을 위한 낙상충격 보호팬츠의 착의평가

박정현,이정란,Park, Jung Hyun,Lee, Jeong Ran 한국의류학회 2017 한국의류학회지 Vol.41 No.4

This study conducted a wearing evaluation of fall impact protective clothing developed in the previous study that evaluated activity, appearance, and practicality for elderly women. A total of 6 kinds of pants, which consisted of the three kinds of pads and two kinds of designs, were evaluated and the results are as follows. First, the activity of the protective clothing was tested with six women in their 60's and scored highly in most criterions that indicated satisfactory activity. The honeycomb type pad was superior in four of ten criterions for the activity evaluation results by pad types. Design B without a knee pad was evaluated as more comfortable on two motions that put pressure on the knee area. Second, the expert group considered design A to be better than design B, while the subject group preferred design B over design A in design appearance evaluation. Both the subject group and expert group evaluated that design A is better than design B in consideration of pads. Third, in the assessment of practicability, both the expert group and the subject group provided the highest score on the question of if elderly women needed protective clothing. The evaluation of washing ability indicated no noticeable change in the clothing form and size before and after washing.

3D 프린팅 기술을 활용한 낙상충격 보호패드 구조설계 및 필라멘트 소재에 따른 특성 비교

박정현,정희경,이정란,Park, Jung Hyun,Jung, Hee-Kyeong,Lee, Jeong Ran 한국의류학회 2017 한국의류학회지 Vol.41 No.5

This study uses 3D printing technology to design and fabricate a fall impact protection pad with a spacer fabric structure. The design of the pads consists of hexagonal three-dimensional units connected in a honey-comb shape; in addition, the unit consists of a surface layer and a spacer layer. Protect pads were designed as either a hexagonal type or diamond type according to the surface layer structure; subsequently, a spacer filament was also designed as the most basic I-shape type. Designed pads were printed using four types of flexible filaments to select suitable material for a fall impact protection pad. Impact protection performance and bending stiffness were evaluated for the eight type of pad outputs. As a result of the impact protection performance evaluation, when the force of 6,500N was applied, the force passed through the pad was in the range of 1,370-2,132N. FlexSolid$^{(R)}$ and Skinflex$^{TM}$ showed good protection performance and cubicon flexible filament showed the lowest protection. NinjaFlex$^{(R)}$ was found to be the most flexible in the bending stiffness evaluation.

LTCC용 Glass Frit의 결정화 특성 및 유전 특성에 대한 PbO 함량의 영향

박정현,김용남,송규호,유재영,Park, Jeong-Hyun,Kim, Yong-Nam,Song, Kyu-Ho,Yoo, Jae-Young 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.5

본 연구에서는 $PbO-TiO_2-SiO_2-BaO-ZnO-Al_2O_3-CaO-B_2O_3-Bi_2O_3-MgO$계의 유리를 $1,400{\circ}C$에서 용융시킨 후, 급랭, 분쇄하여 glass frit을 제조하였다. Glass frit 분말을 일축가압성형한 후 $750~1,000{\circ}C$의 온도범위에서 2시간 동안 소성 및 결정화 하였다. Glass frit의 결정화는 $750{\circ}$ 전후의 온도에서 시작되었고, 저온에서의 주된 결정상은 $Al_2O_3$와 hexagonal celsian($BaAl_2Si_2O_8$)이었다. 소성온도가 높아지면서 monoclinic celsian, $ZnAl_2O_4,\;Zn_2SiO_4,\;CaTi(SiO_4)O,\;TiO_24 등이 주된 결정상으로 나타났고, 특히 celsian은 hexagonal에서 monoclinic으로 상전이가 발생하였다. 그리고 15wt%의 PbO를 첨가한 glass frit에만 $PbTiO_3-CaTiO_3$ 고용체가 나타났다. 1MHz 대역에서 유전특성을 살펴본 결과 유전상수는 11~16이었고, 유전손실은 0.020 미만이었다. 그러나 15wt%의 PbO를 첨가한 glass frit의 경우는 $PbTiO_3-CaTiO_3$ 고용체 결정상의 존재로 유전상수가 17~26으로 높았고, 유전손실은 0.010~0.015로서 다른 조성들에 비하여 우수한 특성을 나타내었다. In this study, the glass frit of $PbO-TiO-2-SiO_2-BaO-ZnO-Al_2O-3-CaO-B_2O_3-Bi_2O_3-MgO$ system was manufactured. The glass was melted at $1,400{\circ}C$, quenched and attrition-milled. The glass frit powder was pressed and fired for 2h at the range of $750~1,000{\circ}C$. The crystallization of glass frit began at about $750{\circ}$ and at low temperature, the main crystal phases were hexagonal celsian($BaAl_2Si_2O_8$) and alumina. As the firing temperature increased, the crystal phases of monoclinic celsian, zinc aluminate, zinc silicate, calcium titanium silicate and titania appeared. And the increase of firing temperature led to transformation of hexagonal celsian to monoclinic. The only glass frit containing 15wt% PbO had the crystal phase of solid solution of $PbTiO_3-CaTiO_3$. At the frequency of 1 MHz, the dielectric constant of glass frit crystallized was in the range of 11~16 and the dielectric loss less than 0.020. But the glass frit containing 15wt% PbO had the dielectric constant of 17~26 and loss of 0.010~0.015 because of crystal phase of solid solution of $PbTiO_3-CaTiO_3$.