http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
침전법을 활용한 Co-Ni 전극의 제조와 용융탄산염 연료전지의 그 적용
김시열(Kim, S.Y.),류보현(Ryu, B.H.),함형철(Hahm, H.C.),한종희(Han, J.),윤성필(Yoon, S.P.),남석우(Nam, S.W.),임태훈(Lim, T.H.),이호인(Lee, H.I.) 한국신재생에너지학회 2008 신재생에너지 Vol.4 No.1
In-situ lithiated NiO has been manufactured as a conventional cathode material of molten carbonate fuel cell (MCFC), however this material has a weakness for commercialization of MCFC because NiO is spontaneously dissolved into the electrolyte under MCFC operating conditions, resulting in short circuit between cathode and anode. In this research, therefore, Co(OH)₂-coated Ni powder was prepared by precipitation method with controlling pH at low temperature and atmospheric pressure. Modified cathode was fabricated by a conventional tape casting method and sintered at 700?C in a H₂/N₂ atmosphere, Based on characterization result, Pore size distribution and porosity was suitable for the cathode of MCFC. According to the result of dissolution, Ni solubility of modified cathode was 33% lower than that of conventional cathode. In addition, modified electrode showed a good performance from the single cell operation.
용융탄산염형 연료전지의 NiO 공기극의 용해거동에 미치는 알루미나 코팅효과에 대한 연구
류보현(Ryu, B. H.),윤성필(Yoon, S. P.),한종희(Han, J),남석우(Nam, S. W.),임태훈(lim, T.-H.),홍성안(Hong, S.-A.) 한국신재생에너지학회 2005 신재생에너지 Vol.1 No.1
The stability of alumina-coated NiO cathodes was studied in Li 0.62 /K 0.38 molten carbonate electrolyte. Alumina was effectively coated on the porous Ni plate using galvanostatic pulse plating method. The deposition mechanism of alumina was governed by the concentration of hydroixde ions near the working electrode, which was controlled by the temperature of bath solution. Alumina-coated NiO cathodes were formed to A1 2 O 3 ?NiO solid solution by the oxidation process and their Ni solubilities were were than that of NiO up to the immersion time of 100h. However, their Ni solubilities increased and were similar to that of the bare NiO cathode after 100h. It was because aluminum into the solid solution was segregated to α?LiAlO 2 on the NiO and its Product did not Play a role of the Physical barrier against NiO dissolution.
자동차 타이어의 자동 분류 시스템 개발을 위한 영상 처리
이기성(K. S. Lee),이승우(S. W. Lee),남석우(S. W. Nam),구건서(G. S. Koo),오해석(H. S. Oh) 한국정보과학회 1995 한국정보과학회 학술발표논문집 Vol.22 No.1
본 연구는 인공지능 한 분야인 영상처리에 의한 영상 인식 및 문자인식에 관한 연구로써 타이어 공장 자동화에 있어서의 완전 무인 공장 자동화 시스템을 이루기 위한 자동 분류에 관한 연구이다. 본 연구에서는 컴베이어 벨트를 타고 들어오는 무작위 다품종의 타이어 1개씩 CCD카메라의 입력 영상 1 프레임으로 받아들인다. 타이어에 각인된 DOT코드 부분의 위치를 탐색하여 DOT코드의 문자 영역을 추출하게 된다. 본 연구에서 제시하고자 하는 부품인식 및 부품분류를 위한 실험대상은 자동차 타이어에 각인된 DOT코드 문자를 인식하는 것으로 제한한다. 그러나 자동차 타이어에 각인된 DOT코드에 형태는 동일재질에 부각으로 각인된 문자이므로, 여기에 관련된 각인 문자 인식을 위한 영상 처리 기술에 대해 고찰하고자 한다.