http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
휨하중을 받는 스마트 초고강도 섬유보강 콘크리트의 전기역학적 거동 조사
김태욱,김민경,김동주,Kim, Tae-Uk,Kim, Min-Kyoung,Kim, Dong-Joo 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 논문집 Vol.26 No.5
This study investigated the electromechanical response of smart ultra-high performance fiber reinforced concretes (S-UHPFRCs) under flexural loading to evaluate the self-sensing capacity of S-UHPFRCs in both tension and compression region. The electrical resistivity of S-UHPFRCs under flexural continuously changed even after first cracking due to the deflection-hardening behavior of S-UHPFRCs with the appearance of multiple microcracks. As the equivalent bending stress increased, the electrical resistivity of S-UHPFRCs decreased from 976.57 to 514.05 kΩ(47.0%) as the equivalent bending stress increased in compression region, and that did from 979.61 to 682.28 kΩ(30.4%) in tension region. The stress sensitivity coefficient of S-UHPFRCs in compression and tension region was 1.709 and 1.098 %/MPa, respectively. And, the deflection sensitivity coefficient of S-UHPFRCs in compression region(30.06 %/mm) was higher than that in tension region(19.72 %/mm). The initial deflection sensing capacity of S-UHPFRCs was almost 50% of each deflection sensitivity coefficient, and it was confirmed that it has an excellent sensing capacity for the initial deflection. Although both stress- and deflection-sensing capacity of S-UHPFRCs under flexural were higher in compression region than in tension region, S-UHPFRCs are sufficient as a self-sensing material to be applied to the construction field.
김태욱,한재문,김경덕,윤철환,서장수,김영재,Kim Tae Wook,Han Jae Mun,Kim Kyung Doek,Yun Cheol Whan,Suh Jang Soo,Kim Young Jae 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.1
From measured results of the neutron fields at some principal places within the containment building in a CE type nuclear power plant in operation, the radiation exposure of a worker to the neutron at there was evaluated and the equivalent dose reflecting new recommendation (ICRP 60) was compared with that doing the old one (ICRP 26). The measured neutron field was also compared with calibration neutron field. From the analysis, the following conclusion was obtained: the average neutron radiation weighting factor according to new recommendation is 2.41 to 2.71 times higher than the old one. The average neutorn radiation weighting factor at the measured place was similar to that at calibration neutron field. The average neutron energy at measured place was between 42 and 158 keV and higher than that of calibration field of 500 keV. So, the measured equivalent dose in nuclear power plant could be overestimated compared to the real equivalent dose.
제강 슬래그 잔골재가 혼입된 초속경 시멘트 기반 스마트 보수재료의 전기역학적 특성
김태욱,김민경,김동주,Tae-Uk Kim,Min-Kyoung Kim,Dong-Joo Kim 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 논문집 Vol.27 No.4
This study investigated the electromechanical properties of cement based smart repair materials (SRMs) according to the different amounts of fine steel slag aggregates (FSSAs). SRMs can self-diagnose the quality of repairing and self-sense the damage of repaired zone. The replacement ratios of FSSAs to sand for SRMs were 0% (FSSA00), 25% (FSSA25), and 50% (FSSA50) by sand weight. The electrical resistivity of SRMs generally decreased as the compressive stress of SRMs increased: the electrical resistivity of FSSA25 at the age of 7 hours decreased from 78.16 to 63.68 kΩ-cm as the compressive stress increased from 0 to 22.37 MPa. As the replacement ratio of FSSAs by weight of sand increased from 0% to 25%, the stress sensitivity coefficient (SSC) of SRM at the age of 7 h increased from 0.471 to 0.828 %/MPa owing to the increased number of partially conductive paths in the SRMs. However, as the replacement ratio of FSSAs further increased up to 50%, the SSC decreased from 0.828 to 0.649 %/MPa because some of the partially conductive paths changed to continued conductive ones. SRMs are expected to self-sense the quality and future damage of repaired zone only by measuring the electrical resistivity of the repaired zone in addition to fast recovery in the mechanical resistance of structures.
김태욱,공형윤,Kim, Tae-Wook,Kong, Hyung-Yun 한국인터넷방송통신학회 2014 한국인터넷방송통신학회 논문지 Vol.14 No.6
본 논문에서는 협력 통신의 다중 중계기 모델에 에너지 하베스팅 기법을 적용하여 수신단에서 다이버시티 이득을 극대화함과 동시에 중계기의 전력 낭비를 줄일 수 있는 방안을 제안하였다. 송신단은 에너지 하베스팅 기법이 적용된 다중 중계기 중 가장 우수한 중계기를 선택해 메시지를 전송하게 되며 나머지 중계기는 전력으로 변환하여 저장하게 된다. 또한 기존에 선택된 중계기의 전력량이 일정 수준 이하일 경우 차선의 중계기를 선택해 전송을 유지함으로서 수신단의 다이버시티 이득을 유지할 수 있다. 따라서 제안하는 프로토콜을 일반적인 네트워크에 적용할 경우 중계기의 잔여 전력량에 따라 중계기의 교체가 지속적으로 이루어지게 되어 네트워크의 활용도 및 효율성을 증가시킬 수 있다. 마지막으로, 제안한 프로토콜을 레일리 페이딩 환경에서 전력 수집 효율 및 중계기 활용률, 비트 오류율(Bit Error Rate)을 통해 시스템의 성능을 평가한다. In this paper, an energy harvesting scheme is investigated in the multi-relay cooperation communication. Our proposal is to maximize the diversity gain and overcome the disadvantages of the limited power wireless devices. The best relay is selected based on the maximizing channel gains from source to relays so that the harvested energy at selected relay is best. If an internal power of the best relay is lower than a defined target power, the best relay will harvest the energy from the source, and the help of the source-destination link is changed to the second best relay. By this operation method, the diversity gain is maintained and the performance of the network is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, utilization efficiency, power collection efficiency.
김태욱,송용규,Kim, Tae-Wook,Song, Yong-Kyu 한국항공운항학회 2015 한국항공운항학회지 Vol.23 No.1
In this paper, a simple algorithm is proposed to estimate wind speed and direction which can significantly improve the landing performance of an unmanned parafoil. The proposed algorithm is applied to flight test data along with other known algorithms and the results are compared and discussed. The proposed algorithm shows comparable performance while it can still be applied to the parafoil under control.
환경오염이 오동나무인공림의 물질생산에 미치는 영향에 관한 연구
김태욱,이경재,박인협 ( Tae Wook Kim,Kyong Jae Lee,In Hyeop Park ) 한국산림과학회 1982 한국산림과학회지 Vol.58 No.1
To study the comparison of aboveground biomass of paulownia coreana Uyeki of 6-year-old, located in Seongju of non-attacked forest and Ulsan of damaged forest by the air pollution were selected. Ten sample trees in Seongju district and seven trees in Ulsan selected taking account of DBH were measured for 16 trees in total within a 10 ×10m experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two-variables, DBH and tree height, combined term were presented. IF the estimations are extended to a hectare area stand, it contains 47.49 tons of aboveground biomass in Seongju district and 2.56 tons of it in Ulsan. The net assimilation was 4.73kg/kg/yr in Seongju and 2.29kg/kg/yr in Ulsan and the efficiency of leaf to produce stem was 2.99kg/kg/yr in Seongju and 0.83kg/kg/yr in Ulsan
섬유 배열각의 이산성과 물성치의 불확실성을 고려한 복합재료 적층 평판의 최적 설계
김태욱,신효철,Kim, Tae-Uk,Sin, Hyo-Cheol 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.3
Although extensive efforts have been devoted to the optimal design of composite laminated plates in recent years, some practical issues still need further research. Two of them are: the handling of the ply angle as either continuous or discrete; and that of the uncertainties in material properties, which were treated as continuous and ignored respectively in most researches in the past. In this paper, an algorithm for stacking sequence optimization which deals with discrete ply angles and that for thickness optimization which considers uncertainties in material properties are used for a two step optimization of composite laminated plates. In the stacking sequence optimization, the branch and bound method is modified to handle discrete variables; and in the thickness optimization, the convex modeling is used in calculating the failure criterion, given as constraint, to consider the uncertain material properties. Numerical results show that the optimal stacking sequence is found with fewer evaluations of objective function than expected with the size of feasible region taken into consideration; and the optimal thickness increases when the uncertainties of elastic moduli considered, which shows such uncertainties should not be ignored for safe and reliable designs.