http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
분산전원이 연계된 배전계통의 전압조정장치 최적 운용 프로그램 개발
김찬혁(Chan-Hyeok Kim),노대석(Dae-Seok Rho),정원욱(Won-Uk Jeong) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 분산전원이 배전계통에 연계되어 운용되는 경우, 배전용변전소의 전압조정장치(ULTC)의 최적 운용 방안에 대한 알고리즘을 제시한다. 먼저, ULTC의 최적 송출전압을 결정하는 방안을 제시하고, ULTC의 LDC 정정치(등가임피던스, 부하중심점전압)를 계산하는 알고리즘을 제시하고, 이에 근거하여 프로그램을 개발하였다.
태양광발전이 연계된 배전계통의 보호기기 오동작에 대한 최적 운용방안에 관한 연구
김찬혁(Chan-Hyeok KIM),박현석(Hyeon-Seok Park),노대석(Dea-Seok Rho),신창훈(Chang-Hoon Shin),윤기갑(Gigab Yoon) 대한전기학회 2009 전기학회논문지 Vol.58 No.8
Recently, new dispersed power sources such as photovoltaics, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy. This paper deals with the optimal countermeasures for the mal-function of protective devices at primary feeder in distribution systems when new power sources like photovoltaic (PV) systems are interconnected, based on the symmetrical components of short circuit studies. When new power sources are considered to be interconnected to distribution systems, bi-directional power flow and interconnection transformer connection of new power sources may cause the operation problems of protective devices (mainly re-closer), since new power sources can change typical characteristics of distribution systems. Therefore, this paper shows an analysis skill of the mal-functional mechanism of protective relay and proposes the optimal solution for the mal-function problem using the symmetrical components of fault analysis. And, this paper also shows the effectiveness of proposed method by the simulation at the field distribution systems.
김찬혁(Chan-Hyeok Kim),왕용필(Yong-Peel Wang),한형주(Hyeong-Ju Han),박수영(Soo-Young Park),노대석(Dea-Seok Rho) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 태양광 전원의 운용효율을 향상시키고, 제조원가를 절감시키기 위하여 태양광전원용 고효율 전력전송장치를 설계안을 제시하고자 한다. 이 장치는 하드웨어와 소프트웨어 장치의 조합으로 구성되는데, 하드웨어 장치는 전력손실과 발전효율을 악화시킬 수 있는 정상상태의 전압품질, 태양광 전원이 연계되어 운용되는 경우 계통의 지락 및 단락사고시 사고전류 크기 변화에 의한 보호기기 오· 부동작 문제점 그리고 태양광 모듈의 경년열화로 인한 출력량 감소 등을 해결할 수 있다. 또한 소프트 웨어 장치는 LabVIEW와 Autobase를 이용하여 전력전송장치의 구성기기에 대한 맞춤형 자동설계 및 태양광 모듈 열화진단용 프로그램을 사용하여 모듈의 이상 유·무를 판단함으로써 열화 및 고장으로 인한 출력손실을 줄여, 전체적인 운용효율 향상과 원가절감을 할 수 있다.
듀티 사이클 분할 방식을 이용한 LED 드라이버에 관한 연구
김찬혁(Chan-Hyeok Kim),박대수(Dae-Su Park) 한국산업기술융합학회(구. 산업기술교육훈련학회) 2023 산업기술연구논문지 (JITR) Vol.28 No.4
본 논문에서는 기존의 전해 커패시터 대신에 수명이 긴 필름 커패시터를 사용하는 PFC(Power Factor Correction) Flyback 컨버터를 제안한다. 또한, 필름 커패시터를 사용함에 따라 발생하는 출력단의 리플을 저감하기 위하여 Coupled Inductor와 LC 공진 필터를 적용하고, 역률개선을 위해 불연속 모드를 사용한다. 한편, 불연속 모드를 제어하기 위하여 PFC Flyback 컨버터의 입력과 출력 전압 및 스위칭 전류를 측정하고, 소자의 전류 스트레스를 줄이기위하여 제어 알고리즘에 비교기와 삼각파를 추가하여 듀티비를 분할하는 제어방식을 제안한다. 따라서, 제안한 Coupled LC 공진 DCM Flyback 컨버터의 유용성을 검증하기 위하여, 본 논문은 전력전자 상용프로그램인 PSIM 을이용하여, Coupled LC 공진 Flyback 컨버터에 대한 모델링을 수행하고, 제시한 모델링과 동일한 구성을 가지는 시험 장치를 구현하여 시뮬레이션 및 시험을 수행하여 분석한다. This study proposes a power factor correction (PFC) flyback converter, which uses film capacitors with longer lifespans instead of the existing electrolytic capacitor. Additionally, it adopts a coupled inductor and an LC resonance filter to mitigate the output ripple, which is inevitably generated by a film capacitor, and applies discontinuous conduction mode (DCM) for power factor correction. In contrast, this study measures the input and output voltages of the PFC flyback converter and the switching current for the DCM control and proposes a duty split method by adding a comparator and triangle wave to the control algorithm to reduce the current stress imposed on the components. Therefore, to validate the usefulness of the proposed DCM flyback converter with the coupled LC resonance filter, this study models the proposed DCM flyback converter and implements a test device with the same configuration, and subsequently evaluates the simulation and test results.
신에너지전원의 계통연계 모의시험장치에 의한 전압변동특성 분석
김찬혁(Chan-Hyeok Kim),박현석(Hyeon-Seok Park),박오성(O-Seong Park),노대석(Dae-seok Rho),왕용필(Yong-Peel Wang),현소영(So-Yeong Hyeon) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.11
최근 고압 및 저압 배전계통에 있어서 태양광발전, 풍력발전, 연료전지와 같은 신에너지 전원이 도입에 대한 연구가 적극적으로 검토되고 있다. 그러나 이들은 기존 계통에 도입되어 원활한 운전이 이루어지기 위해서는 신에너지전원에 따른 계통의 전압변동에 대한 분석이 선행적으로 검토되어야 한다. 따라서, 본 논문에서는 실 계통을 축약하여 신에너지전원의 계통연계를 모의한 실증 시험장치를 제작하여, 신에너지전원(태양광발전)의 계통 연계 시에 발생하는 전압변동 특성을 분석하였다.
분산전원 연계용 변압기 결선 방식에 따른 사고특성 분석
김찬혁(Chan-Hyeok Kim),왕용필(Yong-Peel Wang),김우호(Woo-Ho Kim),안준호(Jun-Ho Ahn),노대석(Dae-Seok Rho) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
As Distribution 'Generation has been interconnected to Grid, there have been metering errors, malfunction of protective devices in distribution systems. The cause of malfunction was the reverse power flow due to transformer winding methods when ground faults or severe load unbalance are occurred on the system because Distribution Generation interconnected to the Grid can contribute fault currents. Transformer winding methods in distribution systems with Distribution Generation have been used on Y(grounded)-Y(Grounded), Y(Grounded)-Delta, Y(Ungrounded)-Delta and Delta-Delta winding methods. To verify the effect due to each transformer winding methods was occurred single-line-to-ground fault on each section. Fault currents and voltage magnitude on each transformer winding method were verified by simulation model using PSCAD/EMTDC software.