RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • Dose calibrator 측정 깊이와 용량의 변화에 따른 선량 값의 성향에 대한 고찰

        김진구,함준철,오신현,강천구,김재삼,Kim, Jin Gu,Ham, Jun Cheol,Oh, Shin Hyun,Kang, Chun Koo,Kim, Jae Sam 대한핵의학기술학회 2020 핵의학 기술 Vol.24 No.1

        핵의학이란 방사성동위원소 추적자를 인체에 투여하여 관심장기에 대한 형태학적인 정보와 생물학적이고 기능적인 정보를 얻고 평가한다. Dose calibrator는 의료기관에서 단일 핵종의 방사능을 측정하기 위해 사용하는 장비이며, 방사성동위원소의 정확한 용량의 투여는 진단과 치료에 중요한 요인이다. 최근 정량분석을 위한 여러 시스템이 개발되고 있고 ERPF (Effective Renal Plasma Flow), GFR (Glomerular Filtration Rate) 등 정량분석이 필요한 검사에 있어서 정확한 투여 용량 및 재현성 있는 측정이 중요해지고 있다. 따라서 본 논문을 통해 Dose calibrator의 측정 깊이와 용량에 따른 선량 값의 성향을 알아보고 적절한 측정 깊이 및 용량에 대해 알아 보고자 한다. 실험에 사용한 Dose calibrator는 CRC-15R과 CRC-15βeta (Capintec, New Jersey, USA)를 사용하였다. 선원으로는 표준선원(Standard source) <sup>137</sup>Cs, <sup>133</sup>Ba, <sup>57</sup>Co를 사용하였고, 방사성 의약품은 <sup>99m</sup>Tc-pertechnetate를 사용하였다. 표준선원은 측정 깊이만 변화하여 0 cm부터 15 cm까지 1 cm 깊이마다 15회씩 측정했고, <sup>99m</sup>Tc-pertechnetate의 경우에는 1 mL 주사기로 표준선원과 동일한 깊이로 실험을 진행했고, 용량의 변화를 고려하여 0.1 mL, 0.3 mL, 0.5 mL, 0.7 mL, 0.9 mL로 각 깊이마다 15회씩 측정했다. 표준선원인 <sup>137</sup>Cs, <sup>133</sup>Ba, <sup>57</sup>Co의 깊이의 변화에서는 모두 깊이에 따른 선량 값의 변화가 통계적으로 유의한 차이가 있었다(p<0.05). <sup>99m</sup>Tc-pertechnetate도 깊이에 따른 용량의 변화에서 선량 값이 모두 통계적으로 유의한 차이가 있었다(p<0.05). CRC-15R의 표준선원 비교 그래프에서 <sup>137</sup>Cs, <sup>133</sup>Ba, <sup>57</sup>Co는 Plateau를 그리기 시작한 2 cm에서 9 cm까지는 각 선원마다 비교시 통계적으로 유의한 차이가 없었다(p>0.05). CRC-15βeta의 표준선원 비교 그래프에서는 Plateau를 그리기 시작한 영역은 3 cm에서 9 cm로 통계적으로 유의한 차이가 없었다(p>0.05). <sup>99m</sup>Tc-pertechnetate의 그래프는 0.1 mL에서 1 cm에서 7 cm, 0.3 mL와 0.5 mL에서는 0 cm에서 7 cm, 0.7 mL에서는 0 cm에서 6 cm, 0.9 mL에서는 0 cm에서 5 cm에서 통계적으로 유의한 차이가 나타나지 않았다(p>0.05). 본 연구를 통해 방사성동위원소를 환자에게 주입하거나 정도관리를 진행 시 편차가 적고 재현성을 위해 신뢰할 수 있는 구간을 확인 할 수 있었다. 높이에 따른 변화가 가장 적은 Plateau의 구간이 0.3 mL 혹은 0.5 mL의 용량으로 0 cm 에서 7 cm의 깊이에서 측정한다면, 편차를 최소한으로 줄일 수 있을 것으로 사료된다. 표준선원의 경우에는 본 연구의 결과에 따라 장비마다 Plateau의 변화가 가장 적은 구간의 깊이에서 재현성 있게 측정하는 것이 중요하다고 생각된다. 적절한 구간을 찾아서 재현성 있는 검사를 시행하면 검사의 품질향상 및 피폭선량저감 그리고 진단능을 높이는데 이바지 할 것이라고 생각된다. Purpose It is intended to figure out the errors derived from changes in depth and volume when measuring the Standard source and <sup>99m</sup>Tc-pertechnetate by using a Dose calibrator. Then recommend appropriate measurement depth and volume. Materials and Methods As a Dose calibrator, CRC-15βeta and CRC-15R (Capintec, New Jersey, USA) was used, and the measurement sources were <sup>57</sup>Co, <sup>133</sup>Ba, <sup>137</sup>Cs and <sup>99m</sup>Tc-pertechnetate was also adopted due to its high frequency of use. The Standard source was respectively measured the changes according to its depth without changing the volume, in a range of 0 cm to 15 cm from the bottom of the ion chamber. <sup>99m</sup>Tc-pertechnetate was measured at each depth by changing the volume with 0.1 mL, 0.3 mL, 0.5 mL, 0.7 mL and 0.9 mL Respectively. And the depth range was from 0 cm to 15 cm at the bottom of the ion chamber. Results In the case of Standard source <sup>57</sup>Co, <sup>133</sup>Ba, <sup>137</sup>Cs and <sup>99m</sup>Tc-pertechnetate, there were significant differences according to the measurement depth(p<0.05). <sup>99m</sup>Tc-pertechnetate has a negative correlation coefficient according to the depth, and the error of the measured value was negligible at a depth from 0 cm to 7 cm at 0.3 mL and 0.5 mL, and the range of error increased as the volume increased. Conclusion In clinical practice, it is sometimes installed differently than the Standard depth recommended by the equipment company. If it's measured at the recommended depth and volume, it could be thought that unnecessary exposure of the operator and the patient will be reduced, and more accurate radiation exams will be possible in quantitative analysis.

      • KCI등재

        점성감쇠기가 설치된 모멘트골조의 연쇄붕괴 저항성능

        김진구,이승준,최현훈,Kim, Jin-Koo,Lee, Seung-Jun,Choi, Hyun-Hoon 한국전산구조공학회 2010 한국전산구조공학회논문집 Vol.23 No.5

        본 논문에서는 비선형 동적해석방법을 이용하여 점성감쇠기가 설치된 철골조 건물의 연쇄붕괴 저항성능을 평가하였다. 감쇠기가 설치된 2경간 보-기둥 부분골조를 이용하여 주기 및 항복강도의 변화에 따른 감쇠력의 효과를 검토하였다. 해석 결과에 따르면 감쇠비가 증가할수록 기둥이 제거된 지점의 수직변위가 감소하는 것으로 나타났으며, 탄성시스템 뿐만 아니라 비탄성시스템에서도 효과가 있는 것으로 나타났다. 감쇠기가 설치된 15층 3경간 철골 모멘트골조의 비탄성해석을 통하여 감쇠기의 효과를 검증한 결과, 기둥이 제거될 경우 처짐이 작게 발생하는 6m 경간 모델보다 처짐이 크게 발생하는 9m경간 모델의 경우에 감쇠기의 효과가 더욱 크게 나타났다. In this paper the progressive collapse resisting capacity of steel moment frames with viscous dampers was evaluated by nonlinear dynamic analysis. The effects of dampers installed in steel beam-column sub-assemblages with varying natural period and yield strength were evaluated after sudden removal of a column. According to the parametric study the vertical displacement general decreased as the damping ratio of the system increased, and the dampers were effective both in elastic and elasto-plastic systems. The nonlinear dynamic analysis results of the 15-story analysis models showed that the decrease in vertical deflection of the structure with 9m span length, which showed larger deflection, was more predominant than that of the structure with 6m span length.

      • KCI등재

        선형해석방법을 이용한 철골 모멘트골조의 붕괴저항성능

        김진구,양정호,김태완,Kim, Jin-Koo,Yang, Jeong-Ho,Kim, Tae-Wan 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.4

        1968년 영국의 Ronan Point 아파트에서 발생한 연쇄붕괴 이후 이에 대한 연구가 간헐적으로 진행되어 왔으며, 최근 미국의 World Trade Center 붕괴 후 연쇄붕괴에 대한 연구가 다시 활발히 진행되고 있다. 미국에서는 기존의 연구결과를 바탕으로 2003년 GSA 및 2005년 DoD에서 연쇄붕괴에 대한 설계 및 해석 지침을 제시하였다. 본 연구에서는 이러한 지침서에서 제시하고 있는 선형정적해석법과, 선형동적해석법을 사용하여 국내 설계기준에 의해 설계된 철골 모멘트저항골조에 대한 붕괴저항 성능을 조사하였다. 해석결과에 따르면 GSA 기준을 적용할 경우 횡력을 고려하지 않은 수직저항시스템은 연쇄 붕괴에 취약한 것으로 나타났으나, 지진력을 고려하여 설계된 수평저항시스템은 연쇄붕괴에 대해 안전한 결과를 얻었다. 하지만 DoD 기준에 따르면 두 시스템 모두 연쇄붕괴에 취약한 것으로 나타났다. Since the Ronan Point apartment collapsed in 1968, researches on the progressive collapse have been intermittently conducted, and the collapse of the World Trade Center twin towers made the researches active again. In the United States guidelines such as GSA (2003) and DoD (2005) were provided for design and analysis of building structures against the progressive collapse. In this study the progressive collapse-resisting capacity of steel moment resisting frames designed by KBC-2005 was investigated using linear elastic static analysis and linear dynamic analysis procedures suggested in the guidelines. The results showed that in accordance with the GSA guideline the moment frame designed only for gravity load turned out to be vulnerable to the progressive collapse, whereas the lateral load resisting frame designed for earthquake load satisfied the criteria for progressive collapse. However both systems sailed to satisfy the criteria of the DoD-2005 guideline.

      • KCI등재

        가새골조의 연쇄붕괴 저항성능

        김진구,이영호,최현훈,Kim, Jin-Koo,Lee, Young-Ho,Choi, Hyun-Hoon 한국전산구조공학회 2008 한국전산구조공학회논문집 Vol.21 No.5

        본 논문에서는 비선형 정적해석 및 동적해석을 이용하여 가새골조의 연쇄붕괴 저항능력을 평가하였다. 모두 아홉 개의 서로 다른 가새 형태를 고려하였으며, 모멘트골조의 해석 결과와 비교하였다 비탄성 정적해석 결과에 따르면 현행 기준에 따라 설계된 저층 가새골조는 1층 중앙에 위치한 기둥이 제거될 경우 연쇄붕괴 저항성능 기준을 만족하는 것으로 나타났으나 대부분 취성적인 파괴모드를 나타내었다. 특히 압축가새가 좌굴한 후 인장가새가 인장력을 발휘하기 전에 취약한 층의 기둥이 좌굴하는 것으로 나타냈다. Inverted-V형 가새골조의 경우가 가장 연성도 면에서 우수한 것으로 나타났다. 동적 해석 결과에 따르면 모든 가새골조는 중앙에 위치한 기둥이 제거될 경우 붕괴되지 않으며, 동일한 규모의 모멘트 저항골조에 비해 진동이나 처짐량이 작은 것으로 나타났다. In this study the progressive collapse potential of braced frames were investigated using the nonlinear static and dynamic analyses. All of nine different brace types were considered along with a special moment-resisting frame for comparison. According to the pushdown analysis results, most braced frames designed per current design codes satisfied the design guidelines for progressive collapse initiated by loss of a first story mid-column; however most model structures showed brittle failure mode. This was caused by buckling of columns after compressive braces buckled. Among the braced frames considered, the inverted- V type braced frames showed superior ductile behavior during progressive collapse. The nonlinear dynamic analysis results showed that all the braced frame model structures remained in stable condition after sudden removal of a column, and their deflections were less than that of the moment-resisting frame.

      • KCI우수등재

        건물의 연쇄붕괴 위험부재 선정

        김진구,박종열,한샘,Kim, Jin-Koo,Park, Jong-Yeol,Han, Saem 대한건축학회 2011 대한건축학회논문집 Vol.27 No.2

        This study presented a critical member selection procedure for building structures subjected to progressive collapse based on column removal scenario. A MATLAB-based program was developed to automatically remove all columns one by one, evaluate the member forces, and to detect a critical member which causes progressive collapse once it is removed. To verify the accuracy of this program and the validity of the linear elastic analysis procedure in finding out critical members, the analysis results were compared with the results from nonlinear static and dynamic analysis methods. The analysis results showed that the critical members selected by the developed program generally included those determined by nonlinear dynamic procedure. This is encouraging considering that the main purpose of the developed program is to find out probable candidates for more accurate but time consuming nonlinear dynamic analysis.

      • KCI등재

        역V형 보통가새골조의 반응수정계수

        김진구,남광희,Kim, Jin-Koo,Nam, Kwang-Hee 한국지진공학회 2004 한국지진공학회논문집 Vol.8 No.3

        본 논문에서는 현행 내진설계방법에 따라 설계된 역V형 보통 가새골조 (OCBF)의 비선형 정적 해석을 수행하고, 그 결과를 바탕으로 초과강도계수, 연성계수, 반응수정계수 및 변위 증폭계수 등을 산정하였다. 해석결과에 따르면 대부분의 해석모델에서 현행 내진설계 기준에서 제시한 값보다 작은 초과강도계수 및 반응수정계수 값을 가지는 것으로 나타났다. 그러나 수직 보강 기둥 (zipper column)으로 가새를 보강한 경우 초과강도계수 및 반등수정계수는 보통 가새 구조물에 비하여 상당히 증가하는 것으로 나타났다. In this paper the overstrength factors, ductility factors, and response modification factors of ordinary concentric braced frames designed in accordance with a current seismic design code are determined by performing pushover analysis. According to the analysis results, the overstrength and the response modification factors turn out to be larger than the values regulated in the codes in most model structures. However if the braces are reinforced by BRB or zipper columns, the overstrength factors and response modification factors turn out to increase significantly.

      • KCI등재

        Diversity and Conservation of Korean Marine Fishes

        김진구,Kim, Jin-Koo The Ichthyological Society of Korea 2009 韓國魚類學會誌 Vol.21 No.1

        한반도 주변 3개 해역은 서로 다른 지형과 다양한 해류의 교차로 종다양성의 근간이 된다. 또한, 복잡한 해류가 만나는 전선 주변으로는 좋은 어장이 형성된다. 그러나, 남획에 의한 자원의 감소 및 EEZ 발효에 의한 어장의 축소는 새로운 수산자원 관리법을 필요로 하게 되었다. 수산자원의 효율적 관리를 위해 우선 다양한 해양환경에 적응한 지역개체군의 실체를 파악하는 것이 필요하다. 지역개체군의 형태 및 유전에 관한 연구는 자원의 관리단위 및 구역을 명확히 하는 데 기여할 것이다. 최종적으로 해역별 수산자원의 관리방안 제시가 가능할 것으로 기대된다. Environmental differences of each sea around the Korean Peninsula in terms of factors including topography and complexity of sea current may influence species and genetic diversity of marine fishes. Fish are naturally abundant in the frontal area where various currents or water masses meet. However, this food resource is prone to human overexploitation, threatening the marine ecosystem. New fisheries resources management strategies are needed. Such strategies require information about population structure obtained through morphological and genetic methods.

      • KCI등재

        비선형정적해석 절차를 이용한 선형정적 연쇄붕괴 대체경로 해석방법 개발

        김진구,박새로미,서영일,Kim, Jin-Koo,Park, Sae-Ro-Mi,Seo, Young-Il 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.5

        본 논문에서는 비선형정적해석 방법을 이용하여 기존의 연쇄붕괴 선형정적해석 절차에 수반되는 반복과정을 자동으로 수행하면서도 선형해석 결과와 동일한 결과를 나타내는 새로운 연쇄붕괴 해석절차를 제안하였다. 제안된 해석절차는 GSA 기준에 규정된 기존 선형정적해석법의 단점인 반복적 해석작업 및 그 과정에서 발생할 수 있는 시간과 오류의 가능성을 최소화하여 해석결과의 신뢰성을 확보가 있는 선형정적해석 절차이다. 제안된 해석절차를 검증하기 위하여 철근콘크리트 모멘트골조 및 철골 가새골조의 최하층 기둥부재를 제거한 후 기존 해석법과 제안 해석법을 적용하고 그 결과를 비교 분석하였다. 해석결과에 따르면 제안된 해석절차는 구조물의 붕괴여부의 판정 및 힌지 분포에 있어서 기존의 선형정적해석과 동일한 결과를 나타내었으며, 반복해석 과정이 불필요하므로 기존 해석법에 비하여 매우 짧은 시간에 해석을 수행할 수 있는 것으로 나타났다. In this paper a new analysis procedure for evaluation of progressive collapse resisting capacity of a structure was proposed based on the nonlinear static analysis procedure. The proposed procedure produces analysis results identical to those obtained by the linear static analysis procedure specified in the GSA guidelines without iteration, therefore saving a lot of computation time and excluding the possibility of human errors during the procedure. To verify the validity of the proposed procedure, the two methods were applied to the analysis of a reinforced concrete moment frame and a steel braced frame subjected to loss of a first story column and the results were compared. According to the analysis results, the two methods produce identical results in the prediction of progressive collapse and the hinge formation. As iterative analysis is not required in the proposed method, significant amount of analysis time is saved in the proposed analysis procedure.

      • KCI등재
      • KCI등재

        건물의 연쇄붕괴 위험부재 선정

        김진구(Kim Jin-Koo),박종열(Park Jong-Yeol),한샘(Han Saem) 대한건축학회 2011 大韓建築學會論文集 : 構造系 Vol.27 No.2

        This study presented a critical member selection procedure for building structures subjected to progressive collapse based on column removal scenario. A MATLAB-based program was developed to automatically remove all columns one by one, evaluate the member forces, and to detect a critical member which causes progressive collapse once it is removed. To verify the accuracy of this program and the validity of the linear elastic analysis procedure in finding out critical members, the analysis results were compared with the results from nonlinear static and dynamic analysis methods. The analysis results showed that the critical members selected by the developed program generally included those determined by nonlinear dynamic procedure. This is encouraging considering that the main purpose of the developed program is to find out probable candidates for more accurate but time consuming nonlinear dynamic analysis.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼