김소월 「시혼」의 이기론적(理氣論的)고찰

김지혜 ( Ji Hye Kim ),권유성 ( Yu Seung Kwon ) 한국문학언어학회( 구- 경북어문학회) 2010 어문론총 Vol.52 No.-

This study aims at clarifying that Kim, So-Wol`s poetics is based on LiKi(理氣)philosophy. And this is to show the distinction between Western ideas like Romanticism which is accepted by Kim-uk and So-Wol`s traditional poetics. The results are as follows. First, So-Wol is realized paradoxical sense which can find out positive meaning from negative thing and overcome Western dichotomy by LiKijimyo(理氣之妙) principal means that Li(理) as Hyungisanja(形而上者: metaphysical thing) and Ki(氣) as Hyungihaja (形而下者: physical thing)are neither divided nor united. Second, So-Wol emphasizes that immutable character of Sihon(詩 魂) on his poetics because he wants to show Li`s character as inevitable cause and right. As he authorizes Sihon(詩魂) ontological and axiological character of Li, Sihon(詩魂) has Good truth and thereby has good effect for society. Unlike Kim-uk`s romanticism, to display subjectivity on So-Wol`s poetics is based on LiKi philosophy has a effect for society, because the subjectivity has a moral sensibility. Last, like Li and Ki, Sihon(詩魂) is manifested on poetry by Umyoung(陰影), so poetry is valuated by not Sihon but Umyoung. But So-Wol contradicted himself by asserting that Umyoung(陰影) isn`t discussed merits and demerits. This is explained by considering LiKijimyo(理氣之妙). Ki is a manifestation of Li, therefore when we see poetry as Ki with view is based on authenticity, Ki is not a thing of judgement. But when we poetry with view is based on substantiality, Ki is a thing of judgement. In conclusion, So-Wol intended to include not only eternal nature but also substantiality on modern poetry with LiKi(理氣) philosophy.

WC-Co 초경합금(超硬合金) 슬러지로부터 왕수처리(王水處理)를 이용한 텅스텐의 회수(回收)

김지혜,김은영,김원백,김병수,이재천,신재수,Kim, Ji-Hye,Kim, Eun-Young,Kim, Won-Back,Kim, Byung-Su,Lee, Jae-Chun,Shin, Jae-Soo 한국자원리싸이클링학회 2010 資源 리싸이클링 Vol.19 No.4

A fundamental study was carried out to develop a process for recycling tungsten and cobalt from WC-Co hardmetal sludge generated in the manufacturing process of hardmetal tools. The complete extraction of cobalt and simultaneous formation of tungstic was achieved by treating the sludge using aqua regia. The effect of aqua regia concentration, reaction temperature and time, pulp density on cobalt leaching and tungstic acid formation was investigated. The complete leaching of cobalt was attained at the optimum conditions: 100 vol.% aqua regia concentration, $100^{\circ}C$ temperature, 60 min. reaction time and 400 g/L pulp density. A complete conversion of tungsten carbide of the sludge to tungstic acid was however, obtained at the pulp densities lower than 150 g/L under the above condition. The progress of reaction during the aqua regia treatment of the sludge was monitored through the XRD phase identification of the residue. The metallic impurities in the tungstic acid so produced could be further removed as insoluble residues by dissolving the tungsten values in ammonia solution. The ammonium paratungstate($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$) of 99.85% purity was prepared from the ammonium polytungstate solution by the evaporation crystallization method. 초경공구의 제조공정에서 발생하는 WC-Co 초경합금 슬러지로부터 텅스텐의 순환활용을 위한 기초연구가 수행되었다. 왕수를 사용하여 슬러지로부터 코발트를 침출함과 동시에 탄화텅스텐을 텅스텐산으로 변환시켜 회수하였다. 왕수농도, 반응온도와 시간, 광액농도 등이 코발트의 침출과 텅스텐산의 생성에 미치는 영향을 조사하였으며 최적조건을 도출하였다. 왕수농도 100 vol.%, 반응온도 $100^{\circ}C$, 반응시간 60분에서슬러지의 광액농도가 400 g/L에 도달할 때 까지 슬러지로부터 코발트의 완전한 추출이 이루어졌으나, 슬러지에 존재하는 모든 탄화텅스텐이 텅스텐산으로 완전히 전환되는 것은 광액농도가 150 g/L 이하일 때 이었다. 생성된 텅스텐산을 암모니아 용액에 용해함으로서 금속 불순물들을 불용성 잔사로 제거하는 것이 가능하였다. 증발결정 공정을 통하여 정제된 암모늄 텅스테이트 용액으로부터 99.85%의 순도를 가지는 암모늄 파라텅스테이트($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$)를 얻을 수 있었다.

인터뷰 - 김지혜 롯데칠성음료(주) 디자인팀 디자이너

김지혜,Kim, Ji-Hye (사)한국포장협회 2010 包裝界 Vol.210 No.-

지식경제부와 한국디자인진흥원은 대한민국 디자인 산업을 이끌어갈 우수한 신예 디자이너 발굴의 장이자, 국내 산업 디자인의 미래를 조망하는 "대한민국디자인전람회" 수상작을 발표했다. 대한민국 디자인계를 이끄는 학계 산업계의 초대 추천 디자이너 542명을 배출한 이 전람회는 1995년부터 집계된 출품 수만 2만5천여 점에 달하는 국내 최대 최고 규모의 공모전이다. 이번 전람회에서는 롯데칠성 디자인팀의 김지혜 씨가 바쁜 현대인들에게 안전하고 건강한 생활 식습관을 제안한 "요리하는 즐거움, 건강한 라이프스타일을 위한 패키지디자인연구"로 국무총리상을 수상하게 됐다. 김지혜 디자이너에게 작품 소개 및 패키지디자인에 대한 견해를 들어보았다.

5 Nm³ /hr급 알카라인 수전해 시스템 안전기준 분석 및 안전성능 평가에 관한 연구

김지혜,이은경,김민우,오건우,이정운,김우섭,Kim, Ji-Hye,Lee, Eun-Kyung,Kim, Min-Woo,Oh, Gun-Woo,Lee, Jung-Woon,Kim, Woo-Seop 한국가스학회 2018 한국가스학회지 Vol.22 No.6

풍력에너지는 낮에 비해 야간에 많은 잉여전력을 발생시키기 때문에 야간에 생산되는 전력은 버려지고 있는데, 이 문제를 해결하기 위해 풍력 등 재생에너지를 연계한 수전해 하이브리드 시스템 개발이 활발히 이루어지고 있다. 본 연구에서는 하이브리드 시스템 안전성 향상을 위해 국내 외 수전해 시스템 기준의 평가항목을 분석하였고, 평가 항목을 토대로 수전해 시스템의 안전성능 시험항목을 도출하였다. $5Nm^3/hr$급 수전해 시스템의 안전성능 평가를 위하여 시험항목 중 효율측정시험, 수소발생압력시험, 수소 순도시험을 평가하였다. 그 결과 수소발생량은 $5.10Nm^3/hr$, 스택효율은 $4.97kWh/Nm^3$로 산출되었고, 이때 발생한 수소의 순도는 99.993%로 국제기준 ISO 14687, SAE J2719에 명시된 순도보다 높은 순도의 수소를 생산하였음을 확인할 수 있었다. 본 연구 결과는 향후 수전해 시스템의 구축과 안전성능을 평가에 도움이 될 것이라고 기대한다. The wind energy produced at night is being discarded because of the excess power generated at night compared to daytime. To solve this problem, In this study, we analyzed the evaluation contents for evaluation of domestic and overseas water electrolysis systems and drew contents for safety performance contents test of the water electrolysis system based on the evaluation contents. The test contents produced the efficiency measurement test, the hydrogen generated pressure test, and the hydrogen purity test. And the safety performance evaluation of the alkaline water electrolysis system of $5Nm^3/hr$ was performed based on the results. As a result, the hydrogen generation was calculated as $5.10Nm^3/hr$ and the stack efficiency was $4.97kWh/Nm^3$. The purity of the hydrogen generated was 99.993% and it was confirmed that it produced high purity hydrogen. I think will help us assess and build safety performance of water electrolysis systems in the future.

1960년대 손창섭의 신문연재소설에 나타난 청년 표상 연구

김지혜(Kim, Ji-Hye) 한국어문학회 2016 語文學 Vol.0 No.131

This study is to analyze representation of the youth shown in Son, Chang-seob’s serial novels in newspapers. His serial novels in newspapers are closely connected to the situation of politics and society of 1960s and it reflects identity of a social class as well as awareness of society issues among the public. Also, it shows rapidly changing generation of Korean society and moral regulations through love affairs happening between male and female characters who just had become old generation. Those characters who are playing unique roles in his novel are in their 20s either university students or people who are starting out a career. They confront with old generation due to difference in moral regulation or they reveal irrationality by showing resistance against society. This study particularly analyzed representation of the youth shown in his novels titled 『husband and wife』, 『A classroom of human beings』, 『Father and Two Daughters』 and 『Sons』 that show confrontation between old generation and young generation. Son, Chang-seob criticizes hypocrisy and corruption among materialized old generation through young characters. First type of young people is stuck in the self-contradiction or copies old generation during the process of fighting against old generation. Second type of young people reflects on corruption of Korean society and dreams of becoming a new father. Son, Chang-seob diagnoses corruption of Korean society while showing hopes for future through representation of the youth. Representation of the youth is meaningful as it criticizes corruption of Korean society but it also has limitations since it accepts the national ideology of the time.

지르코니아 세라믹의 표면처리에 따른 치과용 접착제의 전단결합강도

김지혜,서재민,안승근,박주미,송광엽,Kim, Ji-Hye,Seo, Jae-Min,Ahn, Seung-Geun,Park, Ju-Mi,Song, Kwang-Yeob 대한치과보철학회 2013 대한치과보철학회지 Vol.51 No.2

연구 목적: 이 연구의 목적은 지르코니아 표면처리에 따른 3종의 레진시멘트와 지르코니아의 전단결합강도를 평가하기 위함이다. 연구 재료 및 방법: 총 143개의 디스크 모양의 지르코니아 블록(HASS Co., Gangneung, Korea) 시편을 제작하고 총 13개군(n=11)으로 나누었다. 그중9개군은 표면처리 방식(1. 알루미나 분사, 2. 알루미나 분사와 지르코니아 라이너의 도포, 3.알루미나 분사와 Rocatec (3M ESPE, Seefeld, Germany) 처리) 및 사용한 3종류의 레진시멘트(Bistite II (Tokuyama Dental Co., Japan), Panavia F2.0 (Kuraray Medical, Japan), Super-bond C&B (Sun Medical, Japan))에 따라 나누어 열순환처리 전 접착강도 실험을 시행하였다. 열순환처리 전 접착강도 실험은 위 3종류의 레진시멘트를 3가지 방법으로 표면처리한 지르코니아 시편에 접착하고, 상온의 증류수에 24시간 동안 보관한 후, 전단결합강도를 측정하였다. 열순환처리 후 접착강도 실험은, 열순환처리 전 접착강도 실험에서 우수한 전단결합강도를 보인 지르코니아 표면처리군(알루미나 분사와 Rocatec 처리를 하고 3종류의 레진시멘트를 접착한 3개의 군)과 대조군으로 알루미나만으로 표면처리 후 Super-bond C&B를 접착한 1개의 군을 대상으로 $5^{\circ}C$와 $55^{\circ}C$사이에서 5,000회 열순환처리를 시행하고 전단결합강도를 측정하였다. 결과: 열순환처리 전 접착강도 실험에서는 알루미나 분사와 Rocatec 처리를 한 지르코니아 표면에 Super-bond C&B를 접착한 군이 가장 높은 전단결합강도를 보였다. Super-bond C&B를 사용한 군이 다른 시멘트 군보다 유의성 있게 높은 전단결합강도를 보였으며, 지르코니아 표면에 Rocatec 처리를 한 군이 다른 표면처리를 한 군보다 유의성 있게 높은 전단결합강도를 보였다. 열순환처리를 한 후에는, Rocatec 처리를 한 지르코니아 표면에 Super-bond C&B를 접착한 군만이 유일하게 전단결합강도가 증가하였으며, 다른 모든 군에서는 전단결합강도가 감소하였다. 결론: 본 실험에서는 Super-bond C&B 시멘트가 가장 높은 전단결합강도를 보였으며, Rocatec 시스템은 레진시멘트와 지르코니아의 전단결합강도를 향상시키는 방법이 될 것이라고 사료된다. Purpose: The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength of zirconia ceramic to 3 resin cements. Materials and methods: A total of 143 disk-shaped Zirconia blocks (HASS Co., Gangneung, Korea) were randomly divided into three treatment groups: (1) only 50 ${\mu}m$ $Al_2O_3$ sandblasting, (2) 50 ${\mu}m$ $Al_2O_3$ sandblast and zircona liner, (3) 50 ${\mu}m$ $Al_2O_3$ sandblasting and Rocatec (3M ESPE, Seefeld, Germany). Bistite II (Tokuyama Dental Co., Japan), Panavia F (Kuraray Medical, Japan), and Superbond C&B (Sun Medical, Japan) were used to cement onto the zirconia. After 24h of storage in distilled water, shear bond strength was evaluated. High value group was re-tested after thermocycling at 5,000 cycles(5-$55^{\circ}C$). Shear bond strength data were analyzed with one-way ANOVA, two-way ANOVA test and Post Hoc Test (${\alpha}$=.05). Shear bond strength data before and after thermocycling were analyzed with Independent sample T test (${\alpha}$=.05). Results: Super-bond C&B treated with Rocatec showed the most high shear bond strength. Super-bond C&B groups resulted in significantly higher than other cement groups (P<.05). Rocatec groups resulted in significantly higher than other surface treatment groups (P<.05). Shear bond strength has increased in Panavia F treated with Zirconia liner (P<.05). After thermocycling, shear bond strength was increased in Super-bond C&B treated with Rocatec but decreased in other groups (P<.05). Conclusion: Super-bond C&B cement resulted the highest shear bond strength and Rocatec system enhanced the shear bond strength. After thermocycling, shear bond strength has decreased in most resin cements except Super-bond C&B treated with Rocatec.

저소음 프로펠러 설계를 위한 부분공동 유동의 점성 및 비점성 수치해석 비교 연구

김지혜,안병권,박철수,김건도,Kim, Ji-Hye,Ahn, Byoung-Kwon,Park, Cheol-Soo,Kim, Gun-Do 한국음향학회 2014 韓國音響學會誌 Vol.33 No.6

선박용 프로펠러가 수중에서 빠른 속도로 회전할 때, 날개 표면의 국부적인 압력이 낮아짐에 따라 불가피하게 여러 형태의 공동이 발생한다. 이러한 공동현상은 근본적으로 날개 단면의 기하학적 형상 특성과 수동력학적 운용조건에 의해 결정되며, 결과적으로 선박 프로펠러에서 유기되는 수중방사소음은 공동의 발생특성과 직결된다고 할 수 있다. 따라서 저소음 프로펠러 설계를 위해서는 날개 단면의 형상에 따라 발생하는 공동과 그에 따른 소음특성을 이론 및 실험을 통해 정량적으로 평가할 수 있어야 한다. 본 연구에서는 저소음 프로펠러의 설계단계에서부터 적용이 가능한 부분공동성능 해석법 개발 및 날개단면 형상정보 도출을 목표로 선박용 프로펠러 날개 단면에서 발생하는 부분공동 다상 유동의 비점성 수치해석을 수행하였다. 또한 점성해석 상용프로그램인 FLUENT에서 제공하는 난류 및 공동 모델 조합에 따른 결과를 살펴보았으며, 점성 및 비점성 해석 결과를 비교, 평가 하였다. When a ship propeller having wing type sections rotates at high speed underwater, local pressure on the blade decreases and various types of the cavitation inevitably occur where the local pressure falls below the vapor pressure. Fundamentally characteristics of the cavitation are determined by the shapes of the blade section and their operating conditions. Underwater noise radiated from a ship propeller is directly connected to the occurrence of the cavitation. In order to design low noise propeller, it is preferentially demanded to figure out key features: how the cavity is generated, developed and collapsed and how the effect of viscosity works in the process. In this study, we first perform inviscid analysis of the partial cavity generated on two dimensional hydrofoil. Secondly, viscous analysis using FLUENT with different turbulence and cavitation models are presented. Results from both approaches are also compared and estimated.

골반동작을 이용한 체간조절이 편마비 환자의 족저압에 미치는 영향

김지혜,황병용,오태영,Kim, Ji-Hye,Hwang, Byong-Yong,Oh, Tae-Young 대한물리치료학회 2007 대한물리치료학회지 Vol.19 No.5

Purpose: The purpose of this study was to examine effect of trunk control using pelvic movements upon the foot pressure in patients with hemiplegia. Methods: Twelve males with hemiplegia were the procedure executed turnk control using pelvic movements. The foot pressure were measured using Parotec-system. Results: The data were analysed with paired t-test. First, there was a significant increase in external and internal sensors of dynamic foot pressure change of the hindfoot before and after therapy. Also there was significant increase in hallux (p<0.05). Second, there was a significant increase of affected side in support phase(p<0.05) and decreased of affected side in overlapping phase(p<0.05). Third, there was a significant increase in foot floor contact time and impulse pressure rate between affected and non affected side(p<0.05). Conclusion: The trunk control with pelvic movement had an significant effect on the legs by increase activities of hip flexors and abductors. Also had an effect on ankle dorsiflexion and plantar flexor by biomechanical movement.

맥진기를 활용한 대사증후군 대상 임상연구 고찰

김지혜,전영주,Kim, Ji-hye,Jeon, Young-ju 대한한방내과학회 2018 大韓韓方內科學會誌 Vol.39 No.4

Objective: The aim of this research was to investigate the current status and limitations of the clinical use of a pulse tonometry device (PTD). Methods: We searched online medical databases, including Oriental Medicine Advanced Searching Integrated System (OASIS), Research Information Sharing Service (RISS), DataBase Periodical Information Academic (DBpia) and PubMed, for clinical studies of metabolic diseases that used PTD. We selected articles on the clinical application of the PTD but excluded duplicate articles, clinical studies without the PTD, and non-clinical studies. In the first screening, 551 articles were selected. Ultimately, we found 10 articles and classified the articles according to the following diseases: hyperlipidemia, diabetes, overweight and obesity, hypertension, and metabolic disease. Results: Of the 10 selected articles, 4 were focused on hypertension. Two articles were focused on overweight or obesity and two articles were focused on the metabolic disease. Conclusions: This study was the first attempt to conduct a systematic review on clinical studies of metabolic disease using the PTD as a primary outcome. We suggest that the standard of pulse wave parameters and operating procedures for the PTD should be further developed. The results of this study are expected to be used as basic information for the planning and progression of clinical studies of metabolic syndrome using PTD.

근적외선분광법을 이용한 사료용 벼의 사료가치 평가

김지혜,이기원,오미래,박형수,Kim, Ji Hye,Lee, Ki-Won,Oh, Mirae,Park, Hyung Soo 한국초지조사료학회 2019 한국초지조사료학회지 Vol.39 No.4

본 연구는 국내산 사료용 벼를 수집하여 근적외선분광법을 이용한 신속한 품질평가를 위하여 2018년 조사료 품질분석 기관의뢰 된 시료 564점을 수집하여 품질평가 NIR-DB를 구축하고 구축된 DB를 바탕으로 최적의 품질평가 검량식을 개발하고 검증하였다. 각 성분별로 예측 정확성을 평가하기 위해 스펙트라를 측정한 값과 실험실 분석값 간의 상관관계를 이용한 다변량분석법을 이용하였다. 사료용 벼의 수분함량 평가에 대한 예측능력은 각각 SEC 1.66% (R²=0.99)와 SECV 1.81% (R²=0.98)로 나타나 사료가치 평가 성분 중 가장 우수한 예측 능력을 보였으며, CP 함량 각각 SEC 0.42% (R²=0.93)와 SECV 0.50% (R²=0.89)로 나타났다. ADF와 NDF 함량의 예측능력은 각각 SEC 1.25% (R²=0.84), SECV 1.42% (R²=0.79) 및 SEC 1.61% (R²=0.90), SECV 1.79%(R²=0.86)로 나타났다. 사료용 벼의 품질 등급인 RFV의 예측 능력은 SEC 4.67% (R²=0.88), SECV 5.21% (R²=0.84)로 나타났다. 이상의 결과를 종합해보면 근적외선분광법을 이용하여 국내산 사료용 벼의 수분함량과 각종 영양성분을 적은 오차범위에서 분석·평가가 가능하였다. In this study, whole crop rice samples were used to develop near-infrared reflectance (NIR) equations to estimate six forage quality parameters: Moisture, crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), Ash and relative feed value (RFV). A population of 564 whole crop rice representing a wide range in chemical parameters was used in this study. Undried finely chopped whole crop rice samples were scanned at 1 nm intervals over the wavelength range 680-2500 nm and the optical data recorded as log 1/Reflectance (log 1/R). NIRS calibrations were developed by means of partial least-squares (PLS) regression. The correlation coefficients of cross-validation (R²_cv) and standard error of cross-validation (SECV) for whole crop rice calibration were 0.98 (SECV 1.81%) for moisture, 0.89 (SECV 0.50%) for CP, 0.86 (SECV 1.79%) for NDF, 0.89 (SECV 0.86%) for ash, and 0.84 (SECV 5.21%) for RFV on a dry matter (%), respectively. The NIRS calibration equations developed in this study will be useful in predicting whole crop rice quality for these six quality parameters.