http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
인터넷기반 실시간 원격 데이터 분석 시스템 설계 및 구현
김종만(JongMan Kim),김지환(JiHwan Kim),이성구(SungKoo Lee),안세영(SeYoung Ahn),박미경(Mikyoung Park),김홍기(HongKi Kim) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.2Ⅲ
지리적으로 분산된 컴퓨터의 정보 교환을 위해 탄생된 인터넷은 네트워크 응용 프로그램을 개발하기 위한 시스템 개발자들이 로컬 컴퓨터에서 발생하는 실시간(real-time) 데이터의 중앙관리를 위한 통신 수단을 제공한다. 본 논문은 지리적으로 분산된 하/폐수 처리장에서 발생되는 다양한 종류의 실시간 데이터에 대한 효과적인 중앙 관리와 이러한 데이터를 처리, 분석하여 필요한 정보를 즉시 각 처리장에 제공함으로써 처리장 사이의 정보 공유는 물론 감독기관의 각 처리장에 대한 효율적인 운영관리를 위한 인터넷 기반원격 데이터 분석 시스템(RRDAS)의 설계 및 구현에 대해 논한다.
탑승자 머리 보호를 위한 B-필라 트림의 리브 구조 최적설계
김종만(Jongman Kim),이정환(Junghwan Lee),전지환(Jihwan Chun),배철호(Chulho Bae),홍형식(Hyoungsik Hong),서명원(Myungwon Suh) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The National Highway Traffic Safety Administration (NHTSA) has been studying biomechanics to decrease occupant injuries in the event of a crash. Head injury ranks among the top contributors in vehicle accidents. The FMVSS 201 regulates that an equivalent head injury criterion value called as HIC(d) should be under 1000. In this paper, analytical studies are carried out to calculate HIC(d) of B-pillar trim by using LS-DYNA. Optimum design technique for a B-pillar trim with rib structure is applied to minimize the calculated HIC(d). The design variables are spacing of the transverse rib, thickness of the transverse rib and thickness of the longitudinal rib. Experimental points are determined by design of experiment and a regression function is constructed using the response surface method. Optimization has been conducted using regression function as an objective function and optimal plastic rib design is suggested to dissipate impact energy efficiently.
혈관조영실 실시간 스케줄조회 프로그램 개발을 통한 내부고객 만족도 향상
김종만(Jongman-Kim),이안주(Anjoo-Lee),민부기(boogie-Min),안승원(Seungwon-An),신혜선(Hyesun-Shin),송요화(Yohwa-Song),고중석(Joongseok-Go),민관홍(Gwanhong-Min),김성룡(Seongryong-Kim) 대한인터벤션영상기술학회 2011 대한인터벤션영상기술학회지 Vol.14 No.1
목 적 혈관조영실 스케줄을 조회 할 수 있는 프로그램을 개발하여 내부 고객만족도를 향상하려고 한다. 대상 및 방법 혈관조영실 검사 및 시술의뢰가 많은 7개 병동 간호사 70명과 혈관조영실 근무자 13명을 대상으로 프로그램 적용 전, 후로 설문조사를 시행하였다. 병동 설문결과는 대응표본 T-test, 분산분석을 이용 하였고, 혈관조영실 설문은 비모수 Wilcoxon rank t-test, 분산분석을 이용하였다. 프로그램 개발은 본원의 의료정보팀과 혈관조영실 QA팀이 공동 제작하였다. 결 과 프로그램 만족도 조사에서 병동의 경우 시행 전 3.36점에서 시행 후 7.7점으로 상승 하였고(P<0.01) 혈관조영실의 경우 시행 전 3.3점에서 시행 후 6.78점으로 상승하였다(P<0.01). 유선 통화량은 8.2점에서 5.2점으로 프로그램 개발 후 통화량이 줄어들었으며(P<0.01) 혈관조영실 업무량은 프로그램 적용 전 6.9점에서 적용 후 8.6점으로 상승하였다(P<0.01). 결 론 프로그램 개발 적용하면서 병동에서 검사 및 시술시간을 실시간으로 조회할 수 있고 환자의 준비사항 및 주의사항을 검색 조회 할 수 있어 병동 간호사의 만족도가 상승하였고, 혈관조영실 근무자의 경우 업무량은 증가하였으나 문의전화 건수와 민원 발생이 줄어 만족도가 상승하였다. Purpose The purpose of this study is to improve internal customer satisfaction of the new EMR-based scheduling and viewing program in angiography room. Material & method The program was developed by intervention QA team and EMR team in hospital. Survey process was applied, before and after applying the new program, to 13 Radiological Technologist and nurses in angiography room and 70 ward nurses who have many interactions about angiographies and interventions.Ward survey results were analyzed by matched data analysis paired t-test, and angiography room survey results were analyzed by Wilcoxon signed rank t-test. Result In program satisfaction survey, wards satisfaction increased from 3.36 to 7.7 (p<0.01) and intervention team satisfaction increased from 3.3 to 6.78 (p<0.01) after applying the program. Phone from the wards decreased from 8.2 to 5.2 (P<0.01) and Intervention team workloads increased from 6.9 to 8.6 (P<0.01) after applying the program. Conclusion Ward nurse’ satisfaction increased. Because they could easily search patient prepared, precaution and could search procedure time in real time after applying the program. Intervention team workload increased. Nevertheless, satisfaction increased due to decrease of inquiring calls and complaints.
Influence of the variation of its geometry on the disk failure
Jongman Kim(김종만),Hyo-Kune Hwang(황효균),Byung-Ju Dan(단병주),Jin Woo Lee(이진우),Wae Yeul Kim(김외열) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.4
The speed competition of optical disk drive has been accelerated with the fast advancement of its storage density and data transmission technology. The continuous increase of the spinning speed of CD meets the unexpected and catastrophic failure of disk during the operation. The effect of its thickness and outer radius of disk were investigated to reduce stresses and J-integral around the crack tip. The effect of its thickness was considered ahead of the crack tip. In the effect of outer radius of disk, linear elastic fracture mechanics was used to obtain the critical crack length, which indicates the onset length for unstable crack growth. This approach is so significant as to detect the growing crack by disk drive before the catastrophic failure, which will provide the standard size of its safety for high-speed disk drive.