http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원심모형실험용 소형 콘 개발 및 콘 선단저항치 특성에 관한 연구
김재현,김동준,김동수,추연욱,Kim, Jae Hyun,Kim, Dong Joon,Kim, Dong Soo,Choo, Yun Wook 대한토목학회 2013 대한토목학회논문집 Vol.33 No.2
현장지반의 공학적 특성을 파악하기 위한 콘 관입시험(Cone Penetration Test; CPT)은 원지반의 연속적인 강도 특성을 분석하여 다양한 지반변수를 손쉽게 획득할 수 있다는 점에서 널리 활용되고 있으며, 원심모형실험에서도 널리 활용되고 있다. 본 연구에서는 원심모형실험에서 콘선단저항치를 계측할 수 있는 직경이 10 mm인 소형 콘을 개발하고 원심모형실험에서의 적용성을 평가하였다. 개발된 콘으로 4자유도 로봇을 활용하여 원심모형 가속 상태에서 콘 관입시험을 수행하였다. 이 때, 원심가속도 수준을 4회 변화시켜 다양한 유효응력상태에서 콘 관입시험을 실험을 수행하였다. 그 결과, 얕은 관입깊이의 동일한 유효응력에서 콘 선단저항치는 g-level에 영향을 받으며, 선단저항치가 임계 깊이 도달하는 깊이는 g-level과 상대밀도가 커질수록 깊어짐을 확인하였다. 또한, 각 실험에서 임계 깊이에 도달한 선단저항치와 실내실험에서 획득한 지반물성을 이용하여 기존 경험식과 비교하였다. The standard CPT(Cone Penetration Test), which can be easily performed to investigate in-situ soil engineering properties, has been widely used. CPT are also widely being utilized in centrifuge model tests. In this study, a miniature cone with 10mm diameter was developed and its applicability in the centrifuge was evaluated. The developed miniature cone was equipped with a four degree-of-freedom in-flight robot. A series of cone penetration tests was performed under four centrifuge acceleration levels. As results, the cone resistances measured at the same confining stress within shallow penetration depth were affected by the centrifugal accelerations. The critical depth was proportional to the cone diameter and relative density. Cone resistances results below the critical depth and soil parameters obtained from the laboratory tests were compared with those by previously proposed empirical relations.
김재현,이희복,김현섭,김희수,박종욱,박현주,Kim, Jae Hyun,Lee, Hee Bok,Kim, Hyun Sub,Kim, Hee Soo,Park, Jeong Wok,Park, Hyun Ju 대한화학회 2000 대한화학회지 Vol.44 No.3
This study was designed to develop learning materials of multimediafor general science instruction of high school.this learning material was made of HTML record for each middle unit according to the general science curriculum, and was included a variety of Ietter, graph, picture, drawing, animation, and other moving image materials. And it was composed five coursewares:Content, Dictionary, Science Story,lmage Material, and Questions.The learning material is uploaded an internet website under Science Education Research Institute of Kongju National University (http://science.kongju.ac.kr), and also is provided to a CD-ROM title. 본 연구는 고등학교 공통과학 학습을 위한 멀티미디어 자료를 구축하는데그 목적을 두었다.공통과학 교육과정을 기초로 하여 문자 자료, 도표, 그림, 사진, 애니메이션, 동영상 및 음성 자료 등을 HTML 사용하여 멀티미디어 학습 자료를 개발하였다. 멀티미디어 학습 자료의 구성은 내용, 용어사전, 과학이야기, 영상자료, 그리고 질문의 다섯 분야로 나뉜다. 개발된 멀티미디어 자료는 공주대학교 과학교육연구소 홈페이지 (http://science.kongju.ac.kr)에 올려놓았으며, 또한 CR-ROM으로 제공된다.
노인의 보행에 대한 평가 도구의 신뢰도와 타당도 조사 연구
김재현,Kim, Jae-Hyun 대한물리치료학회 2009 대한물리치료학회지 Vol.21 No.1
Purpose: The examine the Reliability and Validity of the modified Emory Functional Ambulation Profile (mEFAP), Tinetti. Gait (TG), Timed Up & Go Tes t (TUG), Comfortable Gait Speed (CGS), Berg Balance Scale (BBS) in assessing gait function and balance in elderly person. Methods: The 45 community-dwelling subjects were participated in this study. Reliability was determined by intra-class correlation coefficient (ICC$_{3,1}$), Bland and Altman method (Standard Error of Measurement (SEM), Smallest Real Difference (SRD)). Results: Validity was examined by correlation the mEFAP, TG, TUG, CGS, BBS. The intra-rater reliability were High (ICC$_{3,1}$ : mEFAP=0.95, TG=0.96, TUG=0.94, CGS=0.96, BBS=0.92) and Absolute reliability were excellent (SEM: mEFAP=1.90, TG=0.21, TUG=0.28 CGS=0.25, BBS=0.52), (SRD: mEFAP=5.26, TG=0.58, TUG=0.77, CGS=0.69, BBS=1.44). There were significant correlations between assessment tool (r=.0.58$\sim$0.78, p<0.01) indicating good validity. Our results provide strong evidence that the assessment tool has good reliability, validity for assessing elderly person undergoing rehabilitation. Conclusion: The gait assessment tool is a useful scale for measuring walking function and recovery in elderly person.
페리다이나믹스 이론과 병렬연산을 이용한 균열진전 문제의 형상 설계민감도 해석
김재현,조선호,Kim, Jae-Hyun,Cho, Seonho 한국전산구조공학회 2014 한국전산구조공학회논문집 Vol.27 No.4
페리다이나믹스 이론과 이진분해 기법의 병렬연산을 이용하여 동적 균열진전 문제에 대한 애조인 형상 설계민감도 해석법을 개발하였다. 페리다이나믹스에서는 균열의 연속적인 분기를 다룰 수 있으며, Explicit 시간적분법을 채택한다. 설계민감도 해석은 애조인 변수법은 경로의존성 문제에는 적합하지 않으나 여기서는 응답해석의 경로를 이미 알고 있으므로 채택하여 사용할 수 있었다. 얻어진 해석적 설계민감도는 유한차분과 비교하여 그 정확성을 검증하였다. 유한차분법은 설계섭동량에 민감하여 비선형성이 강한 페리다이나믹스 문제에서 부정확한 설계민감도를 제시할 수 있다. 정확한 설계민감도 해석을 위해서는 이산화과정에서 $C^1$ 연속성을 가지는 체적율이 필요함을 알 수 있었다. Using the bond-based peridynamics and the parallel computation with binary decomposition, an adjoint shape design sensitivity analysis(DSA) method is developed for the dynamic crack propagation problems. The peridynamics includes the successive branching of cracks and employs the explicit scheme of time integration. The adjoint variable method is generally not suitable for path-dependent problems but employed since the path of response analysis is readily available. The accuracy of analytical design sensitivity is verified by comparing it with the finite difference one. The finite difference method is susceptible to the amount of design perturbations and could result in inaccurate design sensitivity for highly nonlinear peridynamics problems with respect to the design. It turns out that $C^1$-continuous volume fraction is necessary for the accurate evaluation of shape design sensitivity in peridynamic discretization.
손실이후 프레임 정보에 의한 패킷손실은닉 알고리즘 개선
김재현,한민수,Kim Jae-Hyun,Hahn Min-Soo 대한음성학회 2002 말소리 Vol.43 No.-
In real time packetized voice application, missing packets are major source of voice quality degradation. Thus packet loss concealment (PLC) algorithms are needed to guarantee QoS of VoIP. In this paper, we describe packet loss concealment scheme utilizing the next good frame which follows loss packets. When this scheme is combined with other PLC algorithms, such as G.711 pitch waveform replication recommended by ITU-T LP based PLC algorithm, additional voice quality improvement is obtained for consecutive packet loss larger than 60 msec.
무선 센서네트워크에서 동적 예비 클러스터 헤드를 이용한 효율적인 토폴로지 관리 방안에 관한 연구
김재현,이재용,김석규,도윤미,박노성,Kim Jae-Hyun,Lee Jai-Yong,Kim Seog-Gyu,Doh Yoon-Mee,Park No-Seong 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.6B
무선 애드 혹/센서 네트워크에서 제안된 일반적인 클러스터링 기반의 계층적 토폴로지 관리 기법들은 빈번한 토폴로지 변화에 따라 자주 클러스터링을 재구성하게 되고 네트워크 관리에 필요한 오버헤드가 증가하게 된다. 본 논문에서는 이러한 재클러스터링 문제와 부하 분산을 위하여 동적 예비 클러스터 헤드 기법을 사용하는 멀티 흡클러스터링 알고리즘을 제안한다. 제안하는 기법은 이동성과 전원 레벨로 구성된 가중치 맵을 사용하여 예비 클러스터 헤드를 선출하고 멀티 홉 클러스터를 구성한다. 클러스터 헤드는 이러한 가중치 맵과 임계값을 사용하여 헤드의 역할을 예비 클러스터 헤드에게 넘겨주게 된다. 실험결과, 제안하는 알고리즘이 네트워크의 오버헤드를 줄이고 부하 분산을 제공하며, 토폴로지 변화에 무관하게 적절한 클러스터와 멤버를 관리할 수 있음을 확인하였다. As the topology frequently varies, more cluster reconstructing is needed and also management overheads increase in the wireless ad hoc/sensor networks. In this paper, we propose a multi-hop clustering algorithm for wireless sensor network topology management using dynamic pre-clusterhead scheme to solve cluster reconstruction and load balancing problems. The proposed scheme uses weight map that is composed with power level and mobility, to choose pre-clusterhead and construct multi-hop cluster. A clusterhead has a weight map and threshold to hand over functions of clusterhead to pre-clusterhead. As a result of simulation, our algorithm can reduce overheads and provide more load balancing well. Moreover, our scheme can maintain the proper number of clusters and cluster members regardless of topology changes.
김재현,하승현,조선호,Kim, Jae-Hyun,Ha, Seung-Hyun,Cho, Seonho 한국전산구조공학회 2014 한국전산구조공학회논문집 Vol.27 No.5
This paper presents a continuum-based shape design sensitivity analysis(DSA) method for crack propagation problems using a reproducing kernel method(RKM), which facilitates the remeshing problem required for finite element analysis(FEA) and provides the higher order shape functions by increasing the continuity of the kernel functions. A linear elasticity is considered to obtain the required stress field around the crack tip for the evaluation of J-integral. The sensitivity of displacement field and stress intensity factor(SIF) with respect to shape design variables are derived using a material derivative approach. For efficient computation of design sensitivity, an adjoint variable method is employed tather than the direct differentiation method. Through numerical examples, The mesh-free and the DSA methods show excellent agreement with finite difference results. The DSA results are further extended to a shape optimization of crack propagation problems to control the propagation path. 본 논문에서는 재생 커널 기법을 사용하여 혼합모드 균열진전 문제에 대한 연속체 기반의 형상 설계민감도 해석을 수행하였다. 재생 커널 기법은 기존의 유한요소법과 달리 요소망을 재구성할 필요가 없어, 커널 함수의 연속성을 증가시켰을 때 높은 정밀도의 형상함수를 얻을 수 있다는 장점을 가지고 있다. 균열선단 주변에서 J-적분을 수행하기 위해 선형탄성 조건이 고려되었다. 변위장과 응력 확대 계수의 설계변수에 대한 감도해석을 위하여 물질도함수를 도입하였으며 직접 미분법보다 효율적인 애조인 방법을 사용하여 설계민감도를 유도하였다. 수치 예제들을 통해서 재생 커널 기법을 이용한 균열진전 해석결과의 타당성을 확인하였으며 애조인 방법을 이용한 형상 설계민감도 해석 결과를 유한차분법과 비교하여 매우 정확하고 효율적인 결과를 얻을 수 있음을 알 수 있었다. 이를 바탕으로 간단한 모델에 대하여 형상 최적설계를 수행하여 균열이 발생될 수 있는 구조물에 대해서 균열에 의한 피해를 최소화할 수 있도록 균열을 제어할 수 있는 최적의 형상을 도출하였다.
김재현,백호유,Kim, Jae-Hyun,Baek, Hoh-Yoo 한국데이터정보과학회 2011 한국데이터정보과학회지 Vol.22 No.6
베이즈 법칙에서는 사전확률과 우도가 주어지고 어떤 실험결과가 일어났을 때 사후확률을 계산한다. 이러한 사후확률의 계산 문제를 엑셀 매크로를 이용하여 쉽게 계산할 수 있다. 또한 일련의 독립적이고 연속적인 실험결과에 따르는 사후확률도 편리하게 계산할 수 있다. 특히, 엑셀 매크로를 작성하면 작업창에서 반복된 계산의 입력과 출력이 쉽게 이루어진다. 본 논문에서는 베이즈 법칙의 활용을 위해서 엑셀 매크로를 작성하고 그것의 사용 예를 들었다. The prior distribution is the probability distribution we have before observing data. Using Bayes' rule, we can compute the posterior distribution, the new probability distribution, after observing data. Computing the posterior distribution is much easier than before by using Excel VBA macro. In addition, we can conveniently compute the successive updating posterior distributions after observing the independent and sequential outcomes. In this paper we compose some Excel VBA macros for applying Bayes' rule and give some examples.
Vitamin A 와 Ethanol 이 Dimethylnitrosamine 에 의한 Mouse 조직내의 DNA , RNA 및 단백질의 손상도에 미치는 영향
김재현,홍연탁,박정식,김승희,강태규,홍성렬,박창원,권오철,이동권 ( Jea Hyun Kim,Youn Tak Hong,Jung Sik Park,Seung Hee Kim,Tea Gyu Kang,Sung Roul Hong,Chang Won Park,O Cheol Kweon,Dong Kwon Rhee ) 생화학분자생물학회 1991 BMB Reports Vol.24 No.6
Dimethylnitrosamine(DMN) has been shown to induce tumors of the liver, kidney, esophagus and lung. Furthermore low levels of DMN (0.1∼1 ppb) have been detected in normal human blood as well as urine. The purpose of this study is to determine extent of the covalent binding of DMN to DNA, RNA and protein in ethanol- and vitamin A- pretreated mouse. Ethanol or vitamin A was administered for 3 weeks and ^(14)C-labeled DMN was administered intraperitoneally. Then DNA, RNA and protein were isolated from liver, brain and pancreas and used for determination of radioactivity. DMN was bound selectively to liver DNA rather than brain or pancreas DNA. DNA damage in liver was 1.4 and 1.7 times greater than protein and RNA damage, respectively. Ethanol pretreatment and vitamin A pretreatment increased DNA damage in brain significantly upto 6.7 and 9.5 times, respectively, than the control group.
초음파 의료영상에서 지방조직의 음속도 불균일 효과의 영향과 그 보상에 관한 연구
김재현,배무호,정목근,Kim, Jae-Hyeon,Bae, Mu-Ho,Jeong, Mok-Geun 대한의용생체공학회 1998 의공학회지 Vol.19 No.1
본 논문은 초음파 의용 영상에서 인체내의 매질의 초음파 속도의 불균일에 의한 focusing의 저하에 대하여 논하였다. simulation환경으로, 인체 내의 매질 중 속도 값이 가장 큰 차이가 나는 지방(fat)을 일정한 두께로 모델링하였다. 그리고 초음파 빔의 굴절에 의한 진행경로의 변화와 속도차이에 따른 시간지연에 의한 해상도 저하를 구하였다. 그리고 이를 보상하는 방법으로, 보상에 계산량이 많이 필요한 굴절을 무시하고, 속도차에 의한 시간지연만 보상하는 방법을 제안하였다. 제안한 방법을 적용할 경우 현재의 실시간 디지털 focusing 시스템에서 쉽게 구현 가능하다. In this paper, we present the degradation of focusing induced by velocity inhomogeneity in human tissue. For simulation, the fatty layer which is the major factor of degradation for its lower velocity, is modeled as a uniform velocity perturbation layer. And we simulate the degradation of resolution resulting from change of beam path due to refraction and the time delay due to velocity difference. We show that focusing error can be compensated for considering the velocity inhomogeneity only. The proposed compensation method can be operated in real time in the presently used digital focusing systems.