http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
화학 반응열을 고려한 탄소 섬유 복합재 온도와 경화도 예측
유재우,김위대,Jae-Woo Yu,Wie-Dae Kim 한국복합재료학회 2023 Composites research Vol.36 No.5
In the manufacturing process of thermosetting carbon fiber composite materials using an autoclave, the internal temperature changes according to the set temperature cycle. This temperature change causes the resin in the composite material to cure. Heat is generated through the chemical reaction of the resin, which can result in a difference between the temperature inside the autoclave and the temperature of the composite material. Previous research assumed that the temperatures of the composite material and the autoclave were the same and analyzed to predict the residual stress and thermal deformation after manufacturing. However, these stresses and deformations depend on the temperature and degree of cure of the composite material. Therefore, this study verifies a thermal-chemical model analysis technique that takes into account the heat generated by the chemical reaction of the resin to accurately calculate the temperature and degree of cure. Additionally, case studies were conducted for different thicknesses to investigate whether this model exhibits similar trends across varying thicknesses.
성형툴의 상태에 따른 탄소섬유강화 복합재 구조물의 변형 예측
성수환 ( Su Hwan Sung ),김위대 ( Wie Dae Kim ) 한국복합재료학회 2014 Composites research Vol.27 No.6
오토클레이브 성형은 성형제품의 품질은 우수하나 생산비용이 비싸다는 단점이 있다. 생산비용 중에서도큰 비중을 차지하는 것이 성형툴의 제작공정이다. 따라서 본 연구에서는 생산비용 절감을 위한 선행 연구로서 성형툴의 재질 및 표면상태에 따라 L-shape 제품의 성형후 Spring-in을 Abaqus user subroutine을 이용하여 계산하였고, 열팽창계수와 마찰계수에 따른 결과를 나타내었다. 또한 성형툴 제작시 재질 및 표면상태의 기준점을 제시하여 생산비용을 줄이는데 기여하고자 한다. Autoclave processing has a good quality of product, but manufacturing cost is expansive. After curing ofcomposite, the unwanted deformation and distortion increase the manufacturing cost by redesign of tool parts. Therefore, manufacturing cost down is a big issue in processing level. For the reduction of tool costs, it is importantto investigate the effects of tool materials and tool surface conditions. In this paper, we organized user subroutine inABAQUS to consider the thermal effects of part and tool, and the results are compared with commercial code,COMPRO. And this paper suggests reference point for the selection of tool materials to reduce manufacturing costs.
복합재/AISI4340 이중구조 후육실린더의 구조적 거동 및 최적화
이경규 ( Kyeong Kyoo Lee ),김위대 ( Wie Dae Kim ) 한국복합재료학회 2011 Composites research Vol.24 No.2
높은 내압을 받는 장축후육실린더의 성능향상을 위해 최근 그 길이가 길어짐에 따라 무게 또한 무시할 수 없는 변수로 떠오르게 되었다. 따라서 본 논문은 이러한 현상에 대처하기위한 대안으로 장축후육실린더의 무게를 줄이고 대신 복합재 테이프를 감아 무게감소와 더불어 벤딩(bending)현상을 줄이기 위한 목적으로 복합재가 AISI4340 후육실린더에 미치는 영향을 살펴보았다. 우선 크기가 감소된 AISI4340 후육실린더에 높은 내압을 받는 압력용기 등에 주로 사용되는 자긴가공(autofrettage) 공법을 모사한 후 T300/5208, IM7/PETI5, IM7/8552 테이프를 적용하여 각각의 복합재가 AISI4340 후육실린더에 감을 때 발생되는 응력분포를 살펴봄으로써 탄성계수 및 적층각에 따른 영향을 고찰하였다. 또한 복합재/AISI4340 이중구조 후육실린더의 적층각 도출을 위한 다양한 적층각 조합을 통해 적층각 도출을 위한 전초를 마련하였다. 본 논문을 위한 해석에는 MSC.Nastran/Patran v.2005가 사용되었다. To increase the performance of thick-walled cylinders recently their length is continually enlarged. For that reason it is important to reduce weight of the thick-walled cylinders. In this paper the FE models to predict and estimate effects on the composite tapes were created with MSC.Nastran/Patran v.2005. First of all a autofrettage method was applied to the 2D model of the AISI4340 cylinder reduced the thick. And then the comparison of the numerical results with analysis results showed and verified by using T300/5208, IM7/PETI5, IM7/8552 tapes. Those are predicted to the effects of the angle of the composite tapes and elastic modulus according to the composite properties.